Universal 1-1/4 in. Carbide Flush Cutting Oscillating Multi-Tool Blade (3-Piece)

Hello and thank you for reaching out! Yes, the Dremel MM485XU blade can cut ceramic tile. Why It Works The MM485XU is an Oscillating Multi-Tool carbide-tooth blade designed to cut through hard materials such as: Ceramic tile Cement board Plaster Porcelain (in some cases) It features extra-durable carbide teeth, making it suitable for tile cutting compared to standard bi-metal blades. Key Details Ideal for small cuts, trim adjustments, and plunge cuts in tiles. Works best for applying finishes or making space for fixtures (like pipes or outlets), not for large tile removal projects. Use at moderate oscillating speed and avoid applying heavy pressure to prevent overheating or damaging the blade.

Thanks for your question. If you are cutting through the thinset to get to the wall behind it, the carbide flush cutting blade should be able to cut through it. This blade is Ideal for standard precision cutting in hardened materials such as galvanized screws, hardiebacker, plaster, metal, and hardwoods. If you’re goal is really to level the thinset, or remove all of what was holding the subway tile in place, a carbide rasp may be more effective in grinding that down. Take a look at the Dremel MM920. If we can help further, please do not hesitate to contact us at 1-800-437-3635, Monday – Friday, 8 AM to 5 PM CST.

Hello! Thank you for your question. Yes, craftsman tools will fit into the curved interface on the blade while other brands will go all the way through the pin holes. It will look a little different but there is no negative impact to the performance. If you have more questions, please contact Dremel at 1.800.437.3635 Monday- Friday 8AM to 5PM CST.

The Dremel MM485BU Oscillating Blade Kit is compatible with the Dremel MM45 Oscillating Tool. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

The short answer is yes. I used these blades to cut through 10 gauge rodent barriers to add vents for humidity. If you're talking about new stock laying on a work surface, I'd say not so much. While short cuts work very well, it was difficult holding s straight line.

For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday-Friday, 8A-5P CST.

Yes, according to the instructions on the package Fien is listed.

BEST ONES TO GET !!

The Dremel MM485BU Oscillating Dual Blade is compatible with Fien tools. For further assistance, please contact us at 1-800-4-DREMEL (1-800-437-3635), Monday - Friday, 8A - 5P CST.

According to Dremel, these blades will fit your Fien Oscillating tool as well as most any other brand. Most of the blades you can find from nearly all manufacturers are interchangeable with nearly all brands. I found this You Tube video which clearly shows a Dremel blade being used on a Fien tool. https://www.youtube.com/watch?v=jqPTsSs3PmY

Yes, the universal model blades from them fit every model of frénele multi tool

Yes, these blades will fit your tool. See video below.

Yes

The Dremel MM485BU Oscillating Blades are compatible with the Dremel MM45 Osciliating Tool. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.

Hello GTP, The Dremel MM485BU Oscillating Blades are compatible with the Dremel MM45 Osciliating Tool. Thanks for shopping with the Home Depot

Yes, any of these blades will cut plastic perfectly. They are made to cut metal. These blades cut through plastic like butter.

Any toothed blade will. Try not to cut as full speed of the tool, it tends the melt the plastic and gumbup the blade

Yes they will cut plastic

The Dremel MM485BU Oscillating Blades can cut plastic. For further assistance, please contact us at 1-800-437-3635, Monday - Friday, 8A-5P CST.