4 in. Black Flush Mount Metal House Number 8

This bronze-finish screw-on number is useful for house identification, next to your door, so that a delivery person or a guest knows the house’s number. It comes with two small matching screws that go easily into wood siding or wood trim or the wood door itself. It’s four inches high, easily legible from 50 feet away. It’s made of zinc alloy, and is “rust resistant”. This is a practical screw-on house number.

This is a nice number to use for your address and mount on a fence or on your home. It really stands out when you mount it on lighter colored surfaces. It’s pretty much a flat black with a worn bronze around the edges of the number. I like the style of the number and it even sticks out a little bit to give it a little 3-D effect. It’s metal but it’s not too thick and heavy so you can mount it to a wide range of surfaces that don’t need to be very thick or need a board to screw it to.

Everbilt 4 inch Flush Mount Aged Bronze Number 1 (one) is able to be mounted on the house, mailbox, on a plaque, (separate purchase) or however you choose. It comes complete with the mounting hardware, 4x3/4 inch screws. Once you have decided where you want to install it/them you can mark the pre-drilled screw holes and then drill a 3/32 inch pilot hole and firmly attached with the screws provided. It's that easy, the Aged bronze number is functional, attractive, and has great visibility. This house number/numbers will not disappoint. I rated it 4 as I don't know how it will hold up in the weather. I hope this review is helpful.

Great numbers for my house. I own a duplex but I live in it as one home. Because there are two front doors it gets confusing for deliveries and such. These numbers are easily seen from the road. They are just the right size. Also they are very sturdy. The bronze color matches my wind chimes for a very cohesive look. I am very happy I chose these numbers.

This Everbilt four-inch house number "1" came with matching 3/4 inch Phillips head screws (see picture), and it looks very nice (see picture) with its dark bronze color. It is very easy to install. The instructions recommend drilling a 3/32 inch pilot hole (see picture). This is recommended to prevent the wood from splitting and to make the screw go in easier as well – well worth the effort to do that! Just align the number where you are locating it so it is vertical, and mark each of the two holes for mounting (see picture). It is that simple! I am sure this will look good for years to come. I highly recommend it due to the nice finish and the good quality hardware supplied with each number!

The item is good but there seems to be some price gouging. I thought the price was way to high.