#1 Home Improvement Retailer

Internet # 306133301

Model # HD2000

Product Images

2000-Watt 12-Volt Power Inverter

Limit 5 per order
Apply Now
6 Months Everyday Financing** available on purchases of $299 or more. Apply Now
  • Includes 3 ft. 2-Gauge battery cables
  • 2000-Watt of continuous power and 4000-Watt peak
  • LCD screen shows input voltage, output wattage and battery level
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

The Hammer Down 2000-Watt modified wave inverter uses its 12-Volt vehicle batter to directly power your home appliances and power tools. Dual 110-Volt outlets, dual USB ports and 2000 watts of continuous power allow you to operate many items at the same time. It features modified wave technology to provide stable, consistent power in order to work with a wide range of equipment.

Highlights

  • Lab tested and buyer approved, this amazing inverter has been tested, validated and approved by METLAB for both its safety and performance, MET Approved under UL std 458 and CSA std C22.2
  • LCD Display shows you the input voltage, output wattage and battery level as well as various protections including overload, temperature and high or low voltage
  • High quality power inverter charger, equipped with two 110-Volt AC outlets for charging larger devices such as laptops and tablets, 2 USB charging ports (2.1A shared) for powering USB compatible devices
  • Three-year parts and labor warranty
  • 3 ft. zero gauge battery cables included
  • 2000-Watts continuous power and 4000-Watt peak
  • Input voltage 12-Volt DC, output voltage 110-Volt to 120-Volt AC
  • Dual USB with 2.1A shared
  • .
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 306133301

Model # HD2000

Additional Resources

Shop All HAMMERDOWN

Specifications

Dimensions: H 3.5 in, W 3.5 in, D 13.8 in

Dimensions

Product Depth (in.)

13.8 in

Product Height (in.)

3.5 in

Product Width (in.)

3.5 in

Details

Amperage (A)

166.6 A

Features

LCD Display, Low Battery Shutdown, Low Voltage Audible Alarm, Overload Protection, Short Circuit Protection, USB Port

Included

Cord Set

Number of Receptacles

2

Product Weight (lb.)

7.72 lb

Returnable

90-Day

Running Wattage

2000

Start Type

Electric Switch

Starting Wattage

10

Voltage (V)

120

Warranty / Certifications

Certifications and Listings

MET Listed

Manufacturer Warranty

3 Years

Questions & Answers

Does anyone have info on contacting the manufacturer for warranty issues? Cant find anything anywhere online.
ByNov 4, 2021
1 Answer | 
Answer This Question

The manufacturer for Hammer Down inverters can be called directly at 866.295.6775, customer service is available 9am to 5pm EST Monday to Friday and will be happy to assist you with any issues.

By|Nov 4, 2021


    where is this Hammerdown inverter made?
    BySep 22, 2020
    1 Answer | 
    Answer This Question

    This item is manufactured in China

    By|Sep 23, 2020


      I am looking for an inverter to run a cpap machine while we are camping. Will be using a marine battery 29dc 800 amps. will this work??
      ByAug 30, 2020
      1 Answer | 
      Answer This Question

      The HD2000 should work fine for this application. It would be good to call the manufacturer of the CPAP machine to ensure it can accept a modified wave as opposed to a pure sine wave.

      By|Aug 31, 2020


        Will this power a 3.0 peak hp shop vacuum?
        ByMay 7, 2020
        1 Answer | 
        Answer This Question

        It all depends on the wattage and startup surge.

        By|May 8, 2020


          why cant I see anything on screen its blank..where voltage should read.
          ByFeb 22, 2020
          1 Answer | 
          Answer This Question

          Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is,The screen of the LCD is polarized and will appear blank if looking at it from any direction other than head on. If it still appears blank, please contact the manufacturer directly at 866.295.6775. They are available Monday to Friday 9am to 5pm EST and will be happy to assist you with this.

          By|Mar 2, 2020


            My shop vac is 7 amp will it run it off my car batter
            ByJun 17, 2019
            2 Answers | 
            Answer This Question

            no problem! 2000 watt is 200 amps

            By|Jul 18, 2019

            Yes, your appliance should work fine with this unit.

            By|Jul 18, 2019

              (1)

              How does it connect to a vehicle? Cigarette lighter port?
              ByJun 16, 2019
              2 Answers | 
              Answer This Question

              This inverter should be connected directly to the vehicles battery using a minimum of 4 gauge cable. The cigarette lighter port is to small to handle a 167 Amp connection.

              By|Jun 18, 2019

                They come with small lengths of cable, plus and minus, directly to the battery.

                By|Jun 18, 2019


                Weill this work with my Ford Fusion energy
                ByJun 9, 2019
                2 Answers | 
                Answer This Question

                In my experience it works reliably only for an hour under mild stress (800 watt load) and 2-3 under light load (under 300 watts). Problem being it overheats quickly, even with supplied cables fully tightened. Provided you connect directly to battery terminals and not the cigarette lighter and leave the engine on if running for over 5 minutes or so I figure you should be fine.

                By|Jun 9, 2019

                  As long as your vehicle has a standard 12 Volt battery, this unit will work

                  By|Jun 10, 2019


                    Viewing 1-8 of 26

                    Customer Reviews

                    3.6 out of 5

                    • 3.6 out of 39 reviews
                    • 71% recommend this product
                    Filter by:
                    Showing 1-10 of 39 reviews
                    I bought this inverter to be able to run 2 LED signs (15W each) and 1 Laser Printer (Laserjet 6P)...
                    I bought this inverter to be able to run 2 LED signs (15W each) and 1 Laser Printer (Laserjet 6P) 700W when printing for about 15-20s and 12W when idling (based on my multimeter measurements). It burned out after 1.5hrs and 5 pages printed. Took it apart to find what caused the problem and found, that: 1. Heatsink design is extremely poor. They should of use side walls as heatsinks. 2. The fan is too weak for it. With this fan and heatsink design it may probably supply about 200W continious. 3. Schematics designed on ancient low frequency KA7500/TL494 chip. Max efficiency is 80% for it. 4. Peak power is about 2000W: it has 6x40A fuses for 12V. On the output it has 4x470uF 200V capacitors and 1x40A fuse. Note: fuses didn't burn out - don't leave it unattended when on. PS: to prevent it from burning out move low voltage transistors to the top cover for better cooling and put thermal grease between metal case parts. It should increase continuous power to about 500-700W.
                    by
                      13 found this review helpful
                      I bought it to run my semi microwave and coffee...
                      I bought it to run my semi microwave and coffee maker and it works perfectly just wish the cables were longer then 2ft...
                      by
                      • Verified Purchase
                      I had to immediately return this device because it didn't...
                      I had to immediately return this device because it didn't output the right voltage. It only was producing 90 Volts.
                      by
                      • Verified Purchase
                      1 found this review helpful
                      Unit was defective out of the box...
                      Unit was defective out of the box
                      by
                      • Verified Purchase
                      Easy install. Dependable with real time voltage and watt draw,...
                      Easy install. Dependable with real time voltage and watt draw, availability.
                      by
                      • Verified Purchase
                      It broke down with in 3 mo's...
                      It broke down with in 3 mo's
                      by
                      • Verified Purchase
                      JUNK
                      Used 2 times to charge small ridgid battery and absolutely will not come back on.
                      by
                        1 found this review helpful
                        Excellent product....
                        Excellent product.
                        by
                        • Verified Purchase
                        2 found this review helpful
                        It can run my half horsepower well pump....
                        It can run my half horsepower well pump.
                        by
                        • Verified Purchase
                        3 found this review helpful
                        2 Star Review
                        Rating provided by a verified purchaser
                        by
                        • Verified Purchase
                        Showing 1-10 of 39 reviews