Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
Specifications
Questions & Answers
We currently have a broan 100hl-a fan/heater, if I purchase a new one can I swap out all of the guts from the new one to the old one
Hello Dean, Thank you for your question regarding the 765H110L model. Yes, the parts for the 765H110L are compatible with the 100HL-A model.
The warranty sheet is a piece of crap. I'm sure it was designed to be confusing. Nowhere is a bathroom exhaust fan listed.
We are sorry for your frustrating experience with the information provided for your 765H80L model. This model offers a one-year parts warranty. If you need any assistance, please contact us directly via the Contact Us page on our website. We'll gladly try to help you more and answer any questions you may have.
A 3-function switch is needed for this fixture on a dedicated 20-amp circuit Broan says use P3RW switch; however, it’s a 15-amp. If the 3 functions are used concurrently will the 20-amp circuit protect the switch & unit against a fire from starting?
Thank you for your question, Carrie. To ensure the safe and individual operation of all three functions (heater, fan, and light), a dedicated 20-amp circuit is required. A switch is not included with the 765H80L itself; however, our compatible [P3RW three-function switch] will operate each function individually and is rated for the load. The heater, at 1300 watts, draws approximately 11 amps, meaning 14-gauge wire is technically adequate for the internal wiring needs; all other functions require much less amperage. The maximum total load of all three functions running simultaneously is just under 15 amps, which is within the requirements for both the switch and 14-gauge wiring. However, this margin is quite close. If a room or vanity light happens to be on the same circuit, the possibility of tripping the circuit breaker increases. Therefore, we strongly advise using 12-gauge wiring from the 20A breaker to the switch box and then transitioning to 14-gauge wire(s) from the switches to the combination fan wires. Please be sure to check and comply with your local electrical codes, as some cities or jurisdictions may require 12-gauge wiring as a minimum for all kitchen and bathroom installations.
what is the contact information for Broan support team
Thank you for your question on the 765H80L. Our Product Expert Team can be reached at tech.support@broan.com.
What is the manufacturer model number for the damper/duct connector for this fan?
Hello Anna, Thank you for your question regarding the 765H80L heater, fan, and light unit. The damper/duct connector is part number S97014185.
Is the light bright enough for a 7x 10. Bathroom
Thank you for your question on the 765H80L. The bulb is not included with this model so you can select the brightness level you prefer. The bulb specification is an A19 shape, E26 base LED bulb rated up to 14 watts only.
What is the maximum straight line vent ducting length allowed for this model?
Thank you for your question on the 765H80L. This model does not have a maximum run. We recommend the shortest straightest run possible. If an elbow is used, we recommend 2' of straight duct before or after any elbow. We do not recommend an elbow right off the housing.
Does this vent have to be vented to the outside?
Thank you for your question regarding the 765H80L heater, fan, and light unit. Yes, the exhaust fan portion of this unit needs to be ducted to the outside.
Viewing 1-8 of 506
Customer Reviews
4.1 out of 5
Thank you for the 4-star review regarding model 765H80L! We are happy the heater is working well for your needs.
The grille can be removed for cleaning by first removing the light lens in the center. A flat blade screwdriver can help you gently pry out the lens if needed. Next, remove the light bulb. Behind he bulb is an acorn nut. Hold the metal light reflector with one hand and unscrew the acorn nut. This will allow you to remove the grille and reflector for cleaning. Thank you again for taking the time to share your feedback with us!
Thank you for the 4-star review regarding model 765H110L! We are happy you were able to install your fan and you are pleased with the end result. If you need parts assistance, please reach out to us directly for more assistance. We will gladly help resolve this issue. Enjoy your new fan!
We are sorry to learn of your experience with 765H110L model. Please reach out to us directly for more assistance with your heater. We will gladly try to assist you more.
We are sorry to learn of your experience with 765H110L model. Please reach out to us directly for warranty assistance via the Contact Us page on our website. We will gladly help provide you with resolution.
Customer review from broan-nutone.comCustomer review from broan-nutone.com
