Product Images
34 in. 5-Speed Benchtop Radial Drill Press with 5/8 in. Chuck Capacity
- Shop Fox W1669 features 1/2 HP motor with 5 speed settings
- Horizontal-sliding headstock can be tilted 90° left or right
- Work table is adjustable up to 45° left and 90° right
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
The Shop Fox W1669 34" Benchtop Radial Drill Press boasts a 1/2 HP motor that smoothly powers the five spindle speeds ranging from 550 to 3000 RPM. The headstock can be tilted 45° left, 90° right, and slid forward or backward over the column allowing you full adjustability. To make sure that you get the best use of the 9-3/4" diameter table. The drill press features rack-and-pinion elevation controls-adjustable 9-1/2" vertically, 90° tilt (left and right) and is capable of 360° rotation around the column. The W1669 can easily drill holes through plastic, fiberglass, and composites, and has a maximum capacity to drill through a half inch of steel without bogging down. The JT33 keyed drill chuck is fitted to the JT-33 spindle taper and offers up to 3-1/4" of travel. The chuck accepts drill bits from 1/16" to 5/8". You can set the adjustable threaded depth stop for predetermined and repeatable drilling.
Highlights
- Motor: 1/2 HP, 110-Volt
- Swing: 34 in.
- Drill chuck: 1/16 in. to 5/8 in.
- Arbor: JT-33
- Spindle travel: 3-1/4 in.
- Range of speeds: 550 RPM to 3470 RPM
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions: H 31.5 in, W 12 in, D 33.5 in
Dimensions
Chuck Capacity (in.) | 5/8 In. |
|---|---|
Product Depth (in.) | 33.5 in |
Product Height (in.) | 31.5 in |
Product Width (in.) | 12 in |
Details
Amperage (A) | 4.7 A |
|---|---|
Bench & Stationary Tool Type | Drill Press |
Color Family | White |
Cord Length (ft.) | 7 ft |
Horsepower (HP) | 0.5 hp |
Included | No Additional Items Included |
Maximum Speed (RPM) | 3470 RPM |
Minimum Speed (rpm) | 550 |
Number of Speeds | 5 |
Portability | Portable |
Power Tool Features | 360-Degree Swivel, Lockout Power Switch |
Product Weight (lb.) | 91 lb |
Returnable | 90-Day |
Spindle Travel (in.) | 3.25 in |
Swing Distance (In.) | 17 in |
Tools Product Type | Power Tool |
Voltage (V) | 110 V |
Warranty / Certifications
Certifications and Listings | CSA Certified |
|---|---|
Manufacturer Warranty | 2 |
Questions & Answers
Can anyone confirm that this will be suitable for finishing an 80% billet aluminum lower when using an x y slide vise and a drill press lower jig?
Hello and thank you for your question. We would recommend using a Milling Machine or Mill/Drill for this application: Shop Fox M1111—6" x 21" Deluxe Variable-Speed Mill/Drill or Shop Fox M1116—Variable-Speed Mill/Drill with DRO,
You could make it work.. It'll be more time consuming but you can finish lowers with drill presses only though mills are recommended. Personally, I find it a bit ridiculous that shop fox is trying to recommend a 2k and up mill.. When the question asker is looking at a 400.00 press. Seriously? Whose going to buy a 2,000 mill just to finish an AR lower.
Will this drill accept a 1/32 drill bit or smaller?
Hello and thank you for your question. The Shop Fox W1669—1/2 HP 34" Bench-Top Radial Drill Press includes a JT#33 drill chuck with a size of 1/16 ‐ 5/8 in.
What is the maximum distance from the chuck to the table?
Hello and thank you for your question The Shop Fox W1669—1/2 HP 34" Bench-Top Radial Drill Press has a Max. Distance From Spindle to Table of 11‐1/2 in.
Where is this made?
Hello and thank you for your question. This machine is manufactured in China by an ISO 9001 Factory.
Which vice might fit into any of the slots. Thanks.
Hello and thank you for your question. The table on the Shop Fox W1669—1/2 HP 34" Bench-Top Radial Drill Press has 6 T-Slots. The T-Slot size is 1/2". The T-Slot centers are 2-3/4". To better answer your question about a specific vice, please contact the HD.com customer service department at 800-430-3376. Call any day between 6 a.m. and 2 a.m. EST, or call your local store. They can either answer your question or transfer you to your local store to answer your specific question.
Viewing 1-5 of 5
Customer Reviews
4.1 out of 5
5
10
4
3
3
2
2
0
1
2
Customer review from grizzly.comCustomer review from grizzly.com
