1-Pack 4 ft. 7500 Lumens LED Wraparound Light Fixture 65W 120-277V Bright White 4000K Dimmable Garage Lighting Workshop

Very good quality and bright lights. If having them shipped, order in two's because they come in a two pack. I ordered three and the single one came with the box very beat up and yaped but the light still worked.

I recently installed this light in my 100+ year-old shop, replacing a 40 year old fluorescent fixture, and I couldn't be more impressed. This is easily one of the best lighting upgrades I've done in a space that desperately needed it. The best feature for me is the installation process—it's ridiculously straightforward. I simply removed the old fluorescent tubes, disconnected the existing wiring, dropped the old fixture, secured this one, and wired it directly to the wires. No ballast bypass, no confusing rewiring, no extra components or adapters. It took about 30 minutes total. The included instructions are clear enough even for someone who's not an electrician. If you're tired of dealing with finicky fluorescent retrofits, this is a huge relief—just swap it in and you're done. What makes me the happiest is the selectable color temperature and brightness levels. My shop has only one west-facing window, so on cloudy days or in the early morning/evening, it can feel quite dim and cave-like, especially in winter. With this fixture, I could choose between 3500K Neutral White, 4000K Bright White, or 5000K Daylight, and dial the output from 5500 to 6500 to a blazing 7500 lumens. I run it at the highest brightness and 5000K Daylight setting—the difference is night and day compared to the old fluorescent. It floods the entire space with crisp, even light that makes working on projects feel much more pleasant and productive. No more squinting or relying on additional task lights. Beyond the performance, the build quality feels solid. It's maintenance-free with no bulbs to replace, has a rated life of up to 50,000 hours, and comes with a 5-year warranty for peace of mind. It operates way more reliably in cooler temperatures in my unheated shop. The lights are nearly instant on, unlike the old fluorescents that had to warm up for a couple of minutes. I'm so happy with the results that I've already decided to replace the other remaining fluorescent fixture in the shop with another one of these. The only drawback, and a minor one, is that the temperature and brightness selection switches aren’t external. You have to remove the center cover to change them. So before putting the cover on experiment with the settings to determine which one you like best. Removing the cover isn’t a huge hassle, but it does involve getting out the ladder, taking off the cover, changing the settings, then putting it back together again.

I really like these lights they are low profile and easy to install with removal of the center cover, just locate over box attach to ceiling and wire it up. Have the ability to adjust the light output and the color of the lighting makes it useable for many different applications. I like the daylight setting for use in my shop as task lighting over work bench areas. Will buy more.

I've installed a couple of these lights now, first was in the garage and the second now in a room above the garage. These are so much nicer than the old style tube light versions. LED is the way to go on these. Installation is very easy and these units are super lightweight. Way less than the traditional style version of days gone by. Don't waste your time using the included drywall screws and anchors, they're not good, which is usually the case. Spend a few bucks and get yourself something better, it's worth it. Wiring is super simple, I use WAGOs for those instead of the include twist caps. You've got options for changing the brightness and temperature. Wish you didn't have to pull out the center cap plate to do it, but that's a small complaint. A great upgrade if you're looking to replace your old tube style lights or just want to add this type for your space. Great lighting!

I’m in the process of upgrading my garage situation, and need some brighter lights for my projects. This fixture seems to put out a good amount of light over a large area. Like the shallow hight of it as I did not like how far the previous bulbs would hang down when I was moving lumber around. It came with all the anchors and wiring nuts. I did however use my own screw in style drywall anchors. It has multiple knockouts to pull the wire into the fixture, but if you don’t use the center one, you may have to use a small piece of romex to extend the wires like it did. I wish they would have put a little longer leads on the fixture. Other than that it’s a pretty good light.

This light provided excellent illumination to a dark work area. It hung up on the ceiling joist easily. I positioned it to give me max light to several areas. Quite happy with it Only drawbacks of it were 1) a bit of difficulty while installing a power cord into the knockout. Because lens cover will not completely come apart from the fixture, had to gently lift the end of the lens up while connecting the wires. Bad part for me came as I tried to install the Romex connector into the end of the fixture. The connection is recessed into the outer side of the fixture. I dropped the Romex nut many times inside the fixture. Got er done, finally. 2) 2nd issue was light brightness switch is located inside the fixture in the center. Adjust lumens before mtg this fixture.

This 4 foot LED is a replacement for a 4-bulb fluorescent ceiling light in my garage. The package arrived damaged – two large portions of the top flap were torn - but fortunately, it was "double boxed" and the inner box (and its contents) were undamaged. Unpacking the light was uneventful, but mounting it revealed that the mounting holes were 32” apart – fine for many applications, but the rafters in my garage ceiling are 24” apart, not 16”, so I used drywall anchors. I really didn’t like the look of the ones supplied, so I used my own . . . no problem. Hooking things up was simple since I wasn’t connecting multiple lights together. I set the internal switches for color temperature and power all the way up and now have a garage light noticeably brighter and whiter than the fluorescent it replaced and which should remain bright even in cold weather when fluorescents are impaired.

Light is super bright and there are settings to select brightness (lumens) and color (bright white and soft white). Light is super easy to install. Make sure you reuse the power cord from your previous light fixture and buy a new plug-in power cord. Pro tips: put the light fixture where you want to mount it and mark the screw holes before actual installations. Then drill the holes and install tje fixture. Much easier to do it this way.

This 4 foot LED light by Commercial Electric has a much more modern design than the old florescent tube lights I have always had in the past. I like the design with it being a slight "V" angle yet low profile so it's still closer to the ceiling. This in my opinion gives off a larger area of lighting. The instructions took me a couple times reading them all over. The basic install was fine but the added features of the dimmable lighting and the 3 light modes was alittle more tricky I thought. I didn't need a dimmable shop light, so that part I skipped. Getting at the wiring and inside the light was really much different than I had ever experienced but it was do-able. Not sure I would care to mess with it again, but for some people I'm sure it's ok. The bright ness of the light is very nice and the whole look is very nice, so that's why I gave it 4 stars(just because of the hooking up)