Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Securely extend the waste connection from your lavatory sink to your drain connection with the 1-1/4 in. x 6 in. Slip Joint Extension Tube. Made from durable polypropylene, it provides a reliable, long-lasting drainage solution. The washers fit perfectly on drain pipes and are easy to tighten. Includes a slip joint nut and leak-tight washer and features extra-large knobs for convenient, easy assembly. Oatey products have earned the trust of plumbing professionals for over 100 years.

Dimensions: H 1.75 in, W 1.75 in, D 6 in
Product Depth (in.) | 6 in |
|---|---|
Product Height (in.) | 1.75 in |
Product Width (in.) | 1.75 in |
Application | Bathroom Sink |
|---|---|
Color/Finish | White |
Material | Plastic |
Pack Size | 1 |
Plumbing Part Type | Extension |
Returnable | 90-Day |
Strainer Included | No |
Manufacturer Warranty | 1 year |
|---|
The extensions come in varying lengths if needed.
that depends on the sink you have!
This Tail Extension is used when installing or replacing the plumbing under the bathroom sink (1 1/4 inch is typically used in bathroom plumbing). Unless the faucet comes with a pop-up assembly, this piece really has nothing to do with a faucet installation. The pop-up comes with a built-in tail piece, but if the tail does not reach the P-trap, then this extension is needed and they are also available in longer lengths. If this a new installation and you are unsure whether the pop-up tail will reach the P-trap, it is a good idea to buy this extension rather than going back and forth to the store. If all the various pieces are too long, you can cut the pieces shorter, but don't remove more than an inch or so. (Try to leave the pop-up length alone unless its just unavoidable.) All the various pieces should fully penetrant the other to insure good water-tight fitment. That's really the whole propose for these extensions. Remember to sand any cuts smooth to prevent hair and junk from hanging up on its way down the drain.
No. This is part of the sink drain. No need to touch the drain to replace a faucet.
Yes.
This product is an extension for 1-1/2" tubular pipe. Oatey does not carry extensions for water supplies.
i would say no.
Yes, absolutely. I've done it many times rather than making another trip to the store. It IS one extra joint (and potential leak) in the run, but it's done all the time.
No this is not recommended.
I have copper waste pipes in my house. I connect plastic sink drain p-traps or s-traps to copper using rubber couplings with hose clamps. Some building codes now require the rubber couplings with the outer metal jacket.
This is 6" in length.
You can cut the end without the fitting to shorten it.
This part will have a slip joint (mechanical) connection and does not get solvent welded. This will mate up with an ABS SLIP JOINT fitting but not ABS DWV pipe.
They are compatible.
Viewing 1-8 of 12
4.6 out of 5