Lift and Turn Bath Tub Drain Remodel Kit in Brushed Nickel

Hi Home Depot Customer, The Everbilt Lift and Turn Bath Tub Drain Remodel Kit features a lift-and-turn stopper. To access the drain by unscrewing the top of the plug, you typically need to rotate the stopper counter-clockwise. Here are the general steps: 1. **Lift the stopper:** Pull the stopper up to its open position. 2. **Rotate counter-clockwise:** While holding it in the lifted position, try rotating the stopper counter-clockwise. This should allow you to unscrew it from the drain assembly. If you encounter difficulty, ensure there are no obstructions or debris preventing it from turning. If the issue persists, you may need to contact Customer Support by texting “Support” to 38698 or calling 1-800-430-3376 for further assistance.

Hi Home Depot Customer, If your lift-and-turn bath drain stopper is not staying in the open position to allow water to drain, it could be due to a few common issues. The Everbilt Lift and Turn Bath Drain Remodel Kit operates by lifting the stopper and rotating it a quarter turn to switch between open and closed positions. Here are some steps you can take to troubleshoot the problem: 1. **Check for Obstructions:** Sometimes, hair, soap scum, or other debris can interfere with the stopper's mechanism, preventing it from fully engaging in the open position. * Remove the stopper by unscrewing it counter-clockwise. * Clean any visible debris from the stopper and the drain opening. * Reinsert the stopper and test its operation. 2. **Inspect the Mechanism:** The internal mechanism of the lift-and-turn stopper might be loose or worn. * With the stopper removed, examine the stem and any associated parts for signs of damage or misalignment. * Ensure all components are securely attached. 3. **Adjust the Stopper:** Some lift-and-turn stoppers have an adjustable post or screw that controls how high the stopper lifts. * If your stopper has an adjustment screw (often at the top of the stem), try adjusting it slightly to see if it allows the stopper to stay in the open position more effectively. Turning it clockwise typically lowers the stopper, and counter-clockwise raises it. If these steps do not resolve the issue, the stopper mechanism might be faulty or require replacement parts. For more detailed assistance or information on replacement parts, you can contact Customer Support by texting “Support” to 38698 or calling 1-800-430-3376.

This product is equipped with a lift-and-turn stopper. The stopper will remain in the open position only when lifted and rotated into place.

Hi Home Depot Customer, This Everbilt Lift and Turn Bath Drain Remodel Kit is designed to fit bath shoes from 1-1/2 inches to 1-7/8 inches with the supplied adapter. Since your Everbilt Twist and Close model is 1-1/2 inches, this kit should be compatible in terms of size. The kit is intended to convert existing drains to a lift and turn style.

"Dear Valued Home Depot Customer,We have reached out to the manufacturer and their answer is, Hi Home Depot Customer, The specific size of the O-ring for replacement is not explicitly detailed in the product information. The Everbilt Lift and Turn Bath Tub Drain Remodel Kit includes all necessary installation hardware. For more detailed information regarding replacement parts, including O-rings, you can contact Customer Support by texting “Support” to 38698 or calling 1-800-430-3376."

"Hi Home Depot Customer, The specific size of the O-ring for replacement is not explicitly detailed in the product information. The Everbilt Lift and Turn Bath Tub Drain Remodel Kit includes all necessary installation hardware. For more detailed information regarding replacement parts, including O-rings, you can contact Customer Support by texting “Support” to 38698 or calling 1-800-430-3376. AI GENERATED ANSWER. AI generated answer to your question."

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is, Compatibility with a hair-catching screen depends on the specific design and dimensions of the product's drain. Many drains are designed to accommodate standard hair catchers or strainers, which are available in various sizes and styles. To determine if this particular product is compatible with a specific type of screen, you would typically need to check the product's specifications, user manual, or product page for details on recommended accessories or drain dimensions. If you are looking for a hair-catching solution, you might also consider universal drain protectors that sit over the drain opening. AI GENERATED ANSWER. AI generated answer to your question.

The long screw included in the kit is 2 inches in length. This screw is used for attaching the overflow plate to the tub drain. [This answer was generated by AI and verified by product experts.]

Thank you for your question, the answer is; The size of this long screw is 2 in.

The screw size for the stopper in the Lift and Turn Bath Drain Remodel Kit in Chrome is not explicitly mentioned in the product details. However, the kit includes all necessary installation hardware. If the screw is missing, you may need to purchase a replacement screw that fits the stopper. For a more precise solution, you can take the stopper to your local Home Depot store and ask for assistance in finding the correct size screw. Alternatively, you can contact Home Depot customer support for further assistance. [This answer was generated by AI and verified by product experts.]

Thank you for your question, the answer is; The size of the short screw is 8.2mm(10-24UNC)

To remove the old lift and turn drain, first unscrew the lift and turn portion counterclockwise and discard. Then, you will need a Tub Drain Removal Tool or Wrench. You can find these under SKU# 1004870668 and SKU# 1003005279 for the Everbilt Lift and Turn Bath Drain Remodel Kit in Chrome, Grey.