Product Images
180 oz. Dark Gray Polycuramine 2.5 Car Garage Floor Kit
- Durable, 20x stronger than garage floor epoxy, Low VOC
- Resists chemicals, hot tires and ready for full use in 24 hours
- Provides a extreme high gloss finish on interior concrete floors
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
Rust-Oleum RockSolid garage floor coating Kit offers unsurpassed durability. This unique polyuridine formula is 20 times stronger than epoxy. With resistance to salt, oil, gas, and other harsh chemicals, this is one of the toughest floor coatings available and is perfectly suited for high traffic areas like garages and workshops. Low VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic.
Highlights
- Low VOC and odor free, ideal for use on interior concrete surfaces: garage floors, workshops, mud rooms, laundry rooms, rec rooms, basements and other interior concrete surfaces
- Resists cracking and peeling for a long-lasting finish
- Each kit covers up to 500 sq. ft. depending on surface porosity
- High-gloss finish provides a show room quality floor
- Strongly adheres to concrete resists chemicals, prevents hot tire pick up, peeling and cracking
- 8 to 10-hour walk on time, vehicle ready in 24-hours
- Kit includes: 2-foam rollers, 2-polycuramine burst pouches, concrete etch and denim decorative chips
- Not just for garages, use on any interior concrete floor
- New Project? Click here to find the right products for your garage floor
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Container Size | 180 Ounce |
|---|---|
Coverage Area (sq. ft.) | 500 sq ft |
Details
Application | Concrete Basement & Garage |
|---|---|
Application Method | Brush, Roller |
Base Material | Polycuramine |
Color Family | Gray |
Color/Finish | Dark Gray |
Dry To Touch Time (hh:mm) | 10:00 |
Interior/Exterior | Interior |
Kit | Yes |
Maximum Optimal Temperature (F) | 90 |
Minimum Optimal Temperature (F) | 55 |
Number per Package | 1 |
Paint Type | Interior Paint |
Paint/Stain Clean Up | Mineral Spirits |
Paint/Stain Features | Chemical Resistant, Mildew Resistant, Prevents hot tire pickup, Skid Resistant, Waterproof |
Recommended Number of Coats | 1 |
Returnable | 90-Day |
Sheen | High-Gloss |
Stain & Sealer In One | No |
Substrate/Surface Material Use | Brick, Concrete, Stone |
Surface Location | Basement Floor, Garage Floor |
Time before recoating (hours) | 10 |
Transparency | Solid |
Vertical/Horizontal | Horizontal |
Warranty / Certifications
Manufacturer Warranty | Satisfaction guaranteed for full refund of purchase price |
|---|
Questions & Answers
Can u apply the polycuramin top coat on top of the rock solid polycuramin mocha color when sealing an enclosed trailer floor?
Great question. Yes, Rust-Oleum RockSolid Clear Topcoat Garage Floor Coating can be applied to give added protection to Rust-Oleum RockSolid Garage Floor Coating in any of the colors. -Rust-Oleum Product Support 14
Can this product be used on the apron outside of the garage door?
Happy to clear things up, Lydia. Rust-Oleum RockSolid Garage Floor Coating is only suitable for interior surfaces and cannot be used on outdoor areas. The coating will haze and discolor as it is exposed to high amounts of UV. -Rust-Oleum Product Support 14
Can I second coat this product if I used the chips in first coat and don’t like them
Great question, Lori. Yes, a 2nd coat of Rust-Oleum RockSolid Garage Floor Coating can be applied even if chips were added in the original coat. If a new coat is applied within 30 days no additional surface prep is required. -Rust-Oleum Product Support 14
Can this clear coat be used over rustoleum epoxyshield 2 part? I did A full flake coverage
Good question, Jordan. Yes, Rust-Oleum RockSolid Garage Floor Clear Topcoat can be applied over other 2-part coating like Rust-Oleum EpoxyShield Garage Floor Coating. -Rust-Oleum Product Support 14
what nap roller do you recommend? will one size longer have a thicker finish?
Happy to clear things up, Gary. Rust-Oleum RockSolid Garage Floor Coating Kit can be applied using a 3/8" nap roller. Using too long of a nap can work unwanted streaks or lines into the coating. -Rust-Oleum Product Support 14
I am building a new house. Concrete slabs were poured a few months ago. Do I need to grind the concrete before using this product? Also, how long will this last? How often do I need to treat?
Great question, Luis! Yes, the floor does need to be ground or etched before Rust-Oleum RockSolid Clear Garage Floor Coating can be applied. With proper prep and application, this coating will last for years to come. Floors with heavy use, or if a thinner coat is applied, a maintenance coat may need to be applied after a few years. When applying a refresh coat, etching should not be done again, as that is only for bare concrete. - Rust-Oleum Product Support 3
Can we use it on a wood floor? We want to put it on the floor in our covered trailer
We got you covered! Rust-Oleum RockSolid Garage Floor Coating can be applied to a wood surface such as particle board or plywood. Please keep in mind porosity of wood will greatly decrease the spread rate. Two coats may be needed, and the recoat timeframe is 12 hours. For proper prep, you will need to scuff sand the surface with 80 grit sandpaper. Then vacuum and wipe clean with a dry rag before coating. Do not use the etch that comes in the kit, as this is to be used on bare concrete only. - Rust-Oleum Product Support 10
We have a very old workshop floor that we want to coat with this product. We need to repair some cracks so we decided that we would grind the floor first. Do we need to clean the floor if we’re going to grind it?
Great question, Maureen! If you mechanically grind the concrete before applying Rust-Oleum RockSolid Polycuramine Garage Floor Coating, you should still thoroughly clean the floor, but you do not need to etch it. After preparation, the concrete should have a uniform profile similar to 150-grit sandpaper and be free of dust or residue. Grinding and etching can create an overly porous surface, which may significantly increase coating consumption and could even require an additional coat. We also recommend removing the etching powder from the work area to prevent it from being accidentally mixed into the coating. — Rust-Oleum Product Support 15
Viewing 1-8 of 445
Customer Reviews
3.9 out of 5
5
601
4
191
3
92
2
86
1
145
Customer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.comCustomer review from rustoleum.com- Rust-Oleum Product Support 3
- Rust-Oleum Product Support 3
Loading Recommendations
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for garage floors, this kit offers a durable, chemical-resistant finish, covering up to 500 sq ft with a high-gloss sheen. | Ideal for garage floors, providing a high-gloss, protective finish with chemical and wear resistance. | Ideal for garage floors, offering 20x epoxy strength, chemical resistance, and a showroom-quality finish. | Ideal for garage floors, workshops, and basements, this top coat offers 20x stronger epoxy protection and a showroom-quality finish. |
Self-leveling capability | |||
Anti-slip properties | |||
UV resistance | |||
Stain resistance | |||
Chemical resistance | |||
Related Products
240 oz. Tan Epoxy 1 Car Garage Floor Kit
Rust-Oleum EpoxyShield 240 oz. Tan Gloss Low VOC 2.5-Car Garage Floor Kit beautifies and protects your garage floor or workshop area. Specially formulated, 2-components, water-based epoxy floor coating provides superior adhesion and durability. Designed for one coat coverage, easy to apply and provides professional-looking results.
2 Gal. Gray High-Gloss 2-Part Epoxy Interior Concrete Basement and Garage Floor Paint
Our high-gloss, 2-part 100% solids epoxy kit comes with everything you need for a smooth, hassle-free transformation -including mixing buckets, stir sticks and roller covers. Achieve a showroom-quality finish that is crack resistant, peel proof, low VOC, while enhancing the appearance and performance. Plus, we've got your back every step of the way with easy-to-follow instructions, video tutorials, and an on-demand virtual assistant to ensure a flawless finish.
90 oz. Gray Polycuramine 1-Car Garage Floor Kit (2-Pack)
Rust-Oleum RockSolid 90 oz. Gray Polycuramine 1-Car Garage Floor Kit (2-Pack) offers unsurpassed durability. Unique Polycuramine formula is 20 times stronger than epoxy. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors, and other interior concrete surfaces. Low VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic.
180 oz. Gray Polycuramine 2.5 Car Garage Floor Kit
Rust-Oleum RockSolid 180 oz. Gray Polycuramine 1-Car Garage Floor Kit offers unsurpassed durability. Unique Polycuramine formula is 20-times stronger than epoxy. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Low VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic.
