
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Brass Craft Speedi Plumb PLUS 3/8 in. Compression inlet x 1/2 in. Female Iron Pipe outlet flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the faucet water supply, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping.
Inlet Diameter (In.) | 3/8 |
|---|---|
Outlet Diameter (In.) | 1/2 |
Product Length (in.) | 19.80 in |
Tube Diameter (in.) | .5625 in |
Application | Potable Water |
|---|---|
Color Family | Stainless Steel |
Color/Finish | Gray |
Features | Corrosion Resistant, Flexible |
Fitting Material | Brass |
Inlet Fitting End Type | Compression |
Maximum Pressure (PSI) | 125 psi |
Outlet Fitting End Type | FIP |
Pack Size | 1 |
Plumbing Part Type | Supply Line |
Remote Access | No Remote Access |
Requires Hub? | No Hub Required |
Returnable | 90-Day |
Certifications and Listings | ASME Certified, CSA Certified |
|---|---|
Manufacturer Warranty | None |
On a faucet supply line the 1/2" FIP is an iron pipe thread that is usually on a faucet, the 3/8" OD compression is a special thread used on compression fittings. This connector uses a rubber washer instead of the compression nut and compression ring. If you need a better explanation please contact technical support at 877-272-7755. Thanks
Yes, This faucet connector is rated to 160 degrees Fahrenheit.
No! This faucet connector is only designed for use with water. Our gas connectors are a corrugated stainless steel tubing. If you need help selecting a gas line you can contact technical support at 877-272-7755. Thanks
The Inner Hose is made of reinforced PVC. Thanks
This connector is designed to be used on a 3/8" OD compression fitting like on a standard water stop and a 1/2" male iron pipe connection like on a sink or kitchen faucet. You would need to find out what connection types you have. You could also contact technical support at 877-272-7755 for assistance. Thanks
Hello, please reach out to customer service at support@hwcares.com so they can get additional information from you. Thank you
You can use a 15/16" open end wrench to tighten the 1/2" FIP nut and a 5/8" open end wrench to tighten the 3/8" OD compression nut but due to the low torque required and tighter spaces that these connectors can be located in an adjustable wrench is usually easier to work with. It is a personal preference, and you can tighten the nuts any way you feel more comfortable. Thanks
Yes, this is a faucet connector that will work on most kitchen and bathroom faucets. You will need to verify your water stop has a 3/8" OD compression outlet, which is the most common outlet. If you need more help selecting a connector you can contact technical support at 877-272-7755 Thanks
Viewing 1-8 of 112
4.7 out of 5