Montrouge Oak 22 MIL x 7.09 in. W x 48.03 L Waterproof Click Lock Rigid Luxury Vinyl Plank Floor (18.92 sq. ft./Case)

DAILY MAINTENANCE • Regularly sweep, dust, damp mop, or vacuum (without beater bar) your floor to remove any particles that could cause abrasions or scratches to appear on your floor. • Use a damp mop or steam mop to remove spots and soil. Use any pH neutral floor cleaner. • The following products are approved for use with Lifeproof™ vinyl flooring: Lifeproof™ Hard Surface Floor Cleaner, Lifeproof™ Resilient Floor Low Gloss Polish, Lifeproof™ Hard Surface Polish Remover. Lifeproof™ Microfiber Spray Mop with 2-Spray modes. For lightly soiled areas, clean with distilled water. • When the cleaning cloth/mop becomes soiled, rinse or replace it with a clean one. Following up with a clean, dry cloth will remove residual streak-marks and spots. • Avoid spills of acidic products (juice, soft drinks, wine, etc.) on the floor. Clean spots immediately. • Promptly remove any standing water, pet urine or other liquids. • Avoid spills of paints, dyes, or harsh chemicals

Hi Home Depot Customer, To maintain the appearance of your Lifeproof flooring, please follow these care and maintenance guidelines: * **Cleaning:** Regularly sweep, dust, or vacuum (without a beater bar) to remove particles that could cause abrasions. For deeper cleaning, use a damp mop or steam mop with a pH-neutral floor cleaner. * **Approved Products:** You may use the **Lifeproof™ Hard Surface Floor Cleaner** or the **Lifeproof™ Resilient Floor Low Gloss Polish**. * **What to Avoid:** * **DO NOT** use cleaning agents containing wax or oil, as they will leave a dull film. * **DO NOT** use dust cleaners, as they can make the floor slick or damage the finish. * **DO NOT** use vinegar, all-purpose cleaners, steel wool, or scouring pads. For scuff marks, you can use a melamine pad to gently remove them. Always ensure your cleaning cloth or mop is clean to avoid streaks.

Thanks for your question. Our products have certain requirements for the installation‑site environment. Please refer to the installation guide for detailed information.

STC:70;IIC：73

The short answer is no, you generally do not want to use a loose-laid 6 mil poly film directly over old linoleum or vinyl tiles. While a 6 mil poly sheeting is the industry standard moisture barrier when going over a bare concrete slab, placing it on top of an existing finished floor can create a completely different set of technical and safety challenges.Since you are dealing with a first-floor concrete slab and potential VAT (9x9 asbestos tile), choose your path based on the condition of the existing floor: If the old floor is flat and intact: Skip the 6 mil poly entirely. Use a latex-modified cementitious skim coat to fill the joints and smooth it out, then install your floating floor directly on top. If the old floor is uneven or has missing tiles: Apply a specialized substrate primer over the tiles, then pour a self-leveling underlayment. This fills the low spots and completely entombs the old floor safely. The Golden Rule: Never sandwich loose plastic sheeting between old vinyl tiles and a new floating floor. It traps moisture, risks breaking down old adhesives, and causes the new floor to slip and shift.

Thank you for your question. For specific details regarding the requirements for underlayment, please refer to the installation guide.

We used the exact one, and were a few boxes short and was told its discontinued, now we are trying to figure out what to do...Very frustrating. We just ordered it 20 days ago.

Hello Jess, thank you for your question. For Montrouge Oak flooring, we recommend the following molding accessory: Multifunctional #1014764473. We hope this helps and wish you the best of luck with your project.

Thank you for your question.There are a total of 32 boxes in a pallet.

hello Ocean, thanks for your question. It is Not recommend to use extra underlayment on plywood since this product comes with pre-attached pad. Use unapproved underlayment may void warranty coverage (for more details, please refer to installation guide on the product information webpate. thank you