1-7/8 in. to 2-1/2 in. DA1709 NXT Dual Locking Utility Nozzle Shop Vacuum Accessory for RIDGID Wet Dry Vacs

Swap. Lock. Clean...with the RIDGID NXT Max locking floor tool with wet shoe for RIDGID wet dry vacuums that use 2-1/2 in. accessories. Part of the NXT accessory swap & lock attachment system - an upgraded ecosystem of customizable wet dry vac accessory tools with swappable shoes, this shop vac floor tool lets you clean flat, even surfaces, hard floors and wet messes. The RIDGID Max floor tool adapts to your needs, changing what and where it can pick up depending on the shoe attached. The NXT Max floor tool has an upgraded rocking design for better suction and pickup of larger debris such as sawdust, pebbles, and leaves over a wide surface area for more efficiency. The wet shoe, when attached to the NXT Max floor tool, features an improved design that lets you push or pull water to easily clean small backups, pipe bursts, small pooling of water, and snow tracks. To use the shoe, place it at a 45-degree angle against the NXT Max floor tool and snap in place. For removing tough debris on rough surfaces or gently cleaning finished surfaces, use the floor tool hard bristle shoe (SK1501) and soft bristle shoe (SK1502). The RIDGID NXT Max accessories are designed for heavy-duty cleaning and improved productivity with larger debris pickup for construction site cleanups and more. Additional NXT Max accessory tools and shoes are available for other cleanup needs. Max out the cleaning power of your shop vacuum with RIDGID NXT accessories and shoes.

The RIDGID Wet Dry Vac Premium Car Cleaning Kit is everything you need to keep the interior of your vehicle neat and tidy. This 7-piece auto detailing kit features a 10 ft. Premium Hose, Soft Bristle Brush, Stiff Bristle Brush, Flexible Crevice Tool, Claw Nozzle, Hose-to-Hose Connector and an adapter to connect 1-1/4 in. accessories to a 2-1/2 in. hose. In the box you'll find a flexible 10 ft. hose which is 4X more durable than a RIDGID standard hose, plus a connector to fit two hoses together for maximum reach. Also included are a soft bristle brush for easily removing dust and debris from dashboards and a stiff bristle brush for scrubbing spills off upholstery. Dirt ground into floor mats and carpet can be vacuumed up in an instant with the claw nozzle and the flexible crevice tool is great for sucking up debris from hard-to-reach spaces. For even further reach, consider adding the RIDGID 20-foot Tug-A-Long Universal wet dry Vac Hose (LA2522; sold separately) which has three-times the reach of standard wet dry vacs hoses.

Swap. Lock. Clean...with the versatile RIDGID NXT Dual locking claw nozzle for RIDGID wet dry vacuums. Part of the NXT accessory swap & lock attachment system - an upgraded ecosystem of customizable wet dry vac accessory tools with swappable shoes. The NXT Dual claw nozzle fits 1-7/8 in. and 2-1/2 in. hoses and wands, so you can use it with most RIDGID shop vacs. The claw nozzle cleans small to medium-sized debris on car seats, upholstery, floorboards, and workbenches. Attach a 1-7/8 in. hose or wand by aligning the hose's locking tab with the locking teeth on top of the nozzle, then push to lock in place. Switch to a 2-1/2 in. hose or wand by aligning the locking tab with the locking teeth on the underside of the orange cuff and push until secure. The claw nozzle has a low-profile design and a wider, flatter opening compared to the car nozzle, so it allows you to reach under seats and into angled spaces. The wider opening and internal diameter make it effective for better pickup of debris like sand in your carpet. Pair with the RIDGID NXT claw nozzle shoe kit (SK0400, sold separately) to suit your needs. Attach a shoe by sliding one onto the nozzle and click to lock in place. RIDGID NXT Dual accessories are versatile and are designed for general-purpose cleaning, improved productivity with wide-range compatibility, light cleanups, and more. Additional NXT Dual accessory tools and NXT shoes are available to get the most out of your RIDGID shop vacuum, customizing your clean.

Swap. Lock. Clean...with the RIDGID NXT utility nozzle shoe kit that includes one hard bristle shoe, one soft bristle shoe, one soft rubber shoe, for the RIDGID NXT Dual (DA1709) and NXT Max (MAX2509) locking utility nozzles for RIDGID wet dry vacuums that use 1-7/8 in. or 2-1/2 in. accessories. Part of the NXT accessory swap & lock attachment system - an upgraded ecosystem of customizable wet dry shop vac accessory tools with swappable shoes, this 3-piece shoe kit attaches to NXT utility nozzles allowing you to clean surface areas like hard floors, finished floors, and carpeted surfaces. The hard bristle shoe removes tough debris on rough surfaces like subfloors, outside areas, and textured surfaces. The soft bristle shoe gently cleans finished surfaces like wood, tile, and laminate. The soft rubber shoe collects pet hair and dander on mats and rugs. To use the shoes, place one at a 45-degree angle against the utility nozzle and snap in place. To remove the shoe, step on the back tab, releasing the shoe from the tool. RIDGID NXT Max accessories are designed for heavy-duty cleaning and improved productivity with larger debris pickup for construction site cleanups. RIDGID NXT Dual accessories offer versatility for general-purpose cleaning and improved productivity with wide-range compatibility. Additional NXT accessory tools and shoes are available for other cleanup needs. Max out the cleaning power of your shop vacuum with RIDGID NXT accessories and shoes.