
Return this item within 7 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Frigidaire 50-Pint Dehumidifier with Built-In Pump discharges moisture in an upward direction, either into a sink or out of a window helping make dehumidifying your house hassle-free. The custom humidity controls allow you to easily maintain your desired comfort levels. Keep your dehumidifier working efficiently with our easy-to-clean washable filter.
Dimensions: H 20 in, W 18.9 in, D 9.9 in
Maximum Coverage Area (sq. ft.) | 4500 sq ft |
|---|---|
Product Depth (in.) | 9.9 in |
Product Height (in.) | 20 in |
Product Width (in.) | 18.9 in |
Appliance Category | Dehumidifiers |
|---|---|
Appliance Series | Not Applicable |
Bucket capacity (pints) | 12.7 |
Color Family | White |
Control Type | Electronic |
Dehumidifier Features & Style | Adjustable Humidistat, Automatic Shutoff, Bucket Full Indicator, Continuous Run, Portable |
Dehumidifier Use | Whole House |
Included | No Additional Parts Included |
Minimum operating temperature (F) | 41 |
Moisture removal capacity (pints/day) | 50 pt (US) |
Moisture Removal Method | Refrigerant |
Noise Level (dB) | 49 |
Number of Dehumidifiers | 1 |
Number of Fan Speeds | 3 |
Package Size | Individual |
Power Options | Plug-in |
Remote Access | No Remote Access |
Requires Hub? | No Hub Required |
Returnable | 7-Day |
Smart Home | Smart Home Enabled |
Smart Home Protocol | Wi-Fi |
Timer | Yes |
Voice Control Hub Required | No Hub Required for Voice Control |
Voltage (V) | 115 V |
Works With | Alexa, Google, Google Assistant, Proprietary App |
Certifications and Listings | Energy Star, UL Listed |
|---|---|
Manufacturer Warranty | 1 Year |
Hi Kdwe! Thank you for reaching out! We understand that humidity levels along the Gulf Coast can be quite high, so having a reliable drainage setup is important. According to the Frigidaire owner's manual for the 50-Pint Dehumidifier with Built-In Pump (Model FHDP5033Y1), we recommend using a dehumidifier drain hose measuring 1/2 inch (12.7 mm) or larger for continuous drainage. A few additional recommendations: - Ensure the hose has no kinks or bends that could restrict water flow. - Avoid elevated sections when using the gravity-drain option. - Make sure the hose is securely connected to prevent leaks. The recommended hose size remains the same regardless of your area's humidity level. The unit can remove up to 50 pints of moisture per day under specified test conditions. We hope this information helps, and thank you for choosing Frigidaire! - Maico
Hello Kdwe! Thank you for reaching out. The Frigidaire 50 Pt. 4500 sq. ft. Dehumidifier with Built-In Pump and Bucket (Model FHDP5033Y1) is designed to collect moisture from the air, not to automatically fill the water bucket through a connected water supply hose. However, it does offer a continuous drainage option and a built-in pump to automatically discharge the collected water through a drain hose, so you won't have to manually empty the bucket. Please note that connecting a water supply hose to automatically fill the bucket is not a supported feature of this unit. We hope this clarifies things and appreciate your interest in Frigidaire! - Maico
Hi Cookie! According to the Frigidaire owner's manual for the 50-Pint Dehumidifier with Built-In Pump (Model FHDP5033Y1), the four casters are actually stored inside the water bucket, not attached to the bottom corners. Here are the installation steps: 1. Open the cover of the water bucket. 2. Remove the four casters stored inside. 3. Reinstall the bucket cover and return the bucket to the unit. 4. Carefully tilt the unit to one side (no more than 30 degrees) and insert two casters into the designated openings. 5. Repeat on the opposite side to install the remaining two casters. 6. Return the unit to its upright position and allow it to stand for 30 minutes before use. Important: If the unit has already been operated, make sure all water is drained before installing the casters. We hope these instructions help clarify the installation process. We apologize again for the inconvenience and appreciate your patience! For reference, you may consult the Frigidaire Owner's Manual, page 12. - Maico
Thank you for reaching out. The Frigidaire FHDP5033Y1 dehumidifier must be plugged directly into a properly grounded, three-prong wall outlet. Extension cords and adapter plugs are not recommended due to the risk of fire or electric shock. ~Ruth
Thank you for reaching out, Scott. The Frigidaire FHDP5033Y1 uses 470 watts. Rated voltage: 115 V Rated power: 470 W Energy use at continuous full rated power: 0.47 kWh per hour, or approximately 11.28 kWh over 24 hours. Actual energy consumption varies depending on humidity, operating conditions, and how often the compressor runs. ~Ruth
Hi Mike! For the Frigidaire 50 Pint / 4,500 sq. ft. Dehumidifier with Built-In Pump, the manual specifies that the pump can move water up to 5 meters (about 16.4 feet) from the unit. This maximum applies to the total distance and rise of the hose. So, if the hose is laid flat horizontally, you can use approximately 16 feet (5 meters) of hose, provided there is essentially no vertical rise. The manual cautions that exceeding 5 m may damage the unit or cause leaks. For the current Frigidaire 50-pint built-in-pump model, Frigidaire confirms that the pump is designed to discharge water upward to a sink or window. In short: about 16 feet horizontally. - Maico
Hi Carl! Thank you for checking with us. According to the Frigidaire manual/specifications, the Frigidaire 4500 Sq Ft 50 Pint Dehumidifier with Pump includes a drain hose for use with the built-in pump system. This allows continuous drainage without needing to manually empty the bucket. We hope this helps! - Patrick
Hello there, llll1! Yes. The Frigidaire 50-pint, 4,500-sq.-ft. model with the built-in pump and bucket does have automatic defrost. The model matching that Home Depot description is the Frigidaire FHDP5033Y1. Its operating instructions describe an automatic defrost function: when frost accumulates on the evaporator coils, the compressor stops while the fan continues running to remove the frost. This happens automatically. You do not have to manually defrost the unit. - Automatic defrost: Yes. - Manual defrost required: No, under normal operation. - How it works: If the coils become too cold and frost develops, the unit temporarily stops the compressor and keeps the fan running until the frost clears. - Low-temperature operation: The Frigidaire documentation supports operation at lower temperatures, although Frigidaire notes that dehumidifiers may not operate satisfactorily below 41°F (5°C). - Built-in pump: Yes, the pump automatically removes collected water when pump mode is activated. Bottom line: Yes, this is an automatic-defrost dehumidifier, which is an important feature if you're planning to use it in a cool basement or similar space. - Maico
Viewing 1-8 of 30
4.4 out of 5