1/4,3/8,1/2 Inch Drive Dual-Direction Micrometer Torque Wrench Set, 3-Piece (20-200 in-lb, 10-100 ft-lb, 40-300 ft-lb)

TEKTON micrometer torque wrenches are designed to instill confidence in the wrench's accuracy and control during operation. Each wrench is calibrated to be accurate within ±3% for both clockwise and counterclockwise directions and certified to the ISO standard for the full listed range, unlike torque wrenches calibrated to ASME standards, which do not require calibration below 20% of the listed range. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, so it won't skip under stress. The internal components are the same design and construction as all of our 90-tooth ratchets. The 4-degree swing arc reduces the length of travel at the end of the wrench handle between each click. The micrometer scales are laser-marked in bold fonts on the satin-finished handle body, making them easy to read. The collar springs into a locked position that holds your setting and prevents accidental movement during operation. There is no thumb knob to tighten at the end of the handle. A deep, sharp-cut diamond pattern on the surface of the handle creates a coarse texture that won't slip in your hand. The case provides safe transport for the torque wrench and protects it from drops. This set includes 1/4 in. drive (20 - 200 in-lb), 3/8 in. drive (10 - 100 ft-lb), and 1/2 in. drive (40 - 200 ft-lb, 40 - 300 ft-lb) micrometer torque wrenches, each one coming with its own case and serialized certificate of calibration.

TEKTON micrometer torque wrenches are designed to instill confidence in the wrench's accuracy and control during operation. Each wrench is calibrated to be accurate within ±3% for both clockwise and counterclockwise directions and certified to the ISO standard for the full listed range, unlike torque wrenches calibrated to ASME standards, which do not require calibration below 20% of the listed range. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, so it won't skip under stress. The internal components are the same design and construction as all of our 90-tooth ratchets. The 4-degree swing arc reduces the length of travel at the end of the wrench handle between each click. The micrometer scales are laser-marked in bold fonts on the satin-finished handle body, making them easy to read. The collar springs into a locked position that holds your setting and prevents accidental movement during operation. There is no thumb knob to tighten at the end of the handle. A deep, sharp-cut diamond pattern on the surface of the handle creates a coarse texture that won't slip in your hand. The case provides safe transport for the torque wrench and protects it from drops. This set includes 1/4 in. drive (20 - 200 in-lb), 3/8 in. drive (10 - 100 ft-lb), and 1/2 in. drive (40 - 200 ft-lb) micrometer torque wrenches, each one coming with its own case and serialized certificate of calibration.

Tekton electronic torque wrenches have simple controls and straightforward operation. The large, clearly-labeled buttons, backlit LCD with bold fonts, and real-time sensory feedback from lights, beep patterns, and handle vibrations help you easily use the torque wrench. Sound and vibrations can be turned off, but lights are always enabled. The torque wrench has three measurement modes: torque, angle, and torque + angle. An onboard gyroscope allows the ratcheting action to accumulate the total angle in multiple steps. Using an off-axis tool such as a crowfoot wrench or torque adapter can change the effective length of the torque wrench. By entering a length offset, the torque wrench will calculate the necessary torque conversion. You can save up to 10 presets and assign them to ordered slots. Each preset stores your measurement mode, target value, and unit. Additional features include saved history for the last 50 measurements, a shortcut to recall the last peak measurement, calibration reminders, over-torque warnings, auto-shutoff, and a total cycle counter. The wrench is accurate within ±2% for torque and ±1% for angle and is calibrated to the ISO torque standard. Each wrench includes a case, a serialized certificate of calibration, and a reducer. The electronic torque wrench is powered by 3x AA batteries (not included with the product).

Tekton electronic torque wrenches have simple controls and straightforward operation. The large, clearly-labeled buttons, backlit LCD with bold fonts, and real-time sensory feedback from lights, beep patterns, and handle vibrations help you easily use the torque wrench. Sound and vibrations can be turned off, but lights are always enabled. The torque wrench has three measurement modes: torque, angle, and torque + angle. An onboard gyroscope allows the ratcheting action to accumulate the total angle in multiple steps. Using an off-axis tool such as a crowfoot wrench or torque adapter can change the effective length of the torque wrench. By entering a length offset, the torque wrench will calculate the necessary torque conversion. You can save up to 10 presets and assign them to ordered slots. Each preset stores your measurement mode, target value, and unit. Additional features include saved history for the last 50 measurements, a shortcut to recall the last peak measurement, calibration reminders, over-torque warnings, auto-shutoff, and a total cycle counter. The wrench is accurate within ±2% for torque and ±1% for angle and is calibrated to the ISO torque standard. This wrench includes a case, a serialized certificate of calibration, and a 1/2 to 3/8 inch drive reducer. The electronic torque wrench is powered by 3x AA batteries (not included with the product).