Weather Forecaster Wireless Digital Color Display

A:  This unit can operate on battery power only, however, the backlight will only be available momentarily by pressing the backlight button. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a spectacular day! Haylee AcuRite Support Team

A:  Hello John, This station does not feature a rain gauge. For further assistance, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a gorgeous day! Haylee AcuRite Support Team

A:  Hello Peter, We apologize that your station is reading inaccurately but we would be happy to assist! Please follow the steps carefully as the order is crucial to the success of the reset. Hard Reset: 1. Bring both the sensor and display unit together and remove batteries from the outdoor sensor. Make sure that the Wireless Reception Indicator on the display drops to zero bars to ensure that your display was connected to the correct sensor. NOTE: If your display unit continues to show a strong connection, there is another sensor in your area that your display is connecting to (either a neighbor's or from another of your AcuRite units). If you have multiple sensors, make sure to use a different ABC channel on each. 2. Remove the batteries and/or power adapter from the display unit. 3. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button in the battery compartment of the display for 20 seconds, if applicable. 4. Reinstall the batteries in the outdoor sensor. 5. Once the batteries are inserted you should see the red LED light blink approx. every 18 seconds on the front of the sensor. The red LED light should NOT stay on continuously. 6. Reinstall batteries and/or power cord into the display unit then immediately press and hold the reset button again for 20 seconds, if applicable. 7. Let the units sit within a couple of feet of each other for approximately 5 minutes or until you see a solid sensor signal. For further assistance, please reach out to our support team via live chat or email request on the AcuRite Support website. Have an incredible day! Haylee AcuRite Support Team

A:  Hello Harry, We apologize that your station is experiencing this issue but we would be happy to assist! First, please make sure that you are using standard alkaline batteries from a high-quality brand in the display as well as the included power adapter, then perform the following reset. ***This will clear all data on the display.*** 1. Remove all power, AC adapter and/or batteries from the display unit for a full five minutes. 2. Press and hold down the reset button, located in the battery compartment, for 20 seconds if applicable. 3. Plug back into AC power and/or insert recommended batteries. 4. Press and hold down the reset button for an additional 20 seconds if applicable. 5. Verify that the unit has powered on and once a connection has been made, attempt to set time and date. If this does not correct the issue, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a nice day! Haylee AcuRite Support Team