A: The GLL1P or other Bosch laser starts the level and measurement at 6" up to the maximum range. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
A: The dimensions are: Product Height (in.) 11.125 Product Length (in.) 2.5 Product Width (in.) 5.375.
A: Thank you for your question. The GLL 1P laser level is 6" long. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
A: Thank you for your question. The versatile mounting accessory mounts to walls or tripods with 1/4 In.-20 thread. For further information, please call us at 1-877-BOSCH99 (1-877-267-2499).
A: Thank you for your question. The wall holder can be placed onto a screw head slightly projected out of a wall or the wall holder can be mounted to a 1/4" thread tripod.
A: It has a place on the back of the holder for a screw. You have to put a screw in the wall. That's what the instructions tell you to do, but you can tape it to the wall with masking tape, which works better and you don't have to patch a hole in the wall.
A: Yes it attaches with adhesive strips that hold it firmly in place and after you are done they remove easily by pulling on them. And there are pins that you can use to attach it to a wall that leave only 2 very tiny holes. There is also a keyhole screw mount too as well as a magnet.
|Name||Line and Point Laser Level||30 ft. Laser Level Square for Layout and Alignment||600 mm (24 in.) Box Level Digital Level Angle Slope Laser Level Durable Construction, (1-Pack)||32 ft. Tile Laser Square Laser Level Projection Range One-Button Operation, (1-Pack)|
|Measurement Accuracy (in.)||±3/16 in.||±1/2 in.||±1/8 in.||±1/16 in.|
|Number of Measurements||2||0||1||2|
|Laser Level Mounting Method||Tripod,Wall||Tripod,Wall||Wall||Clamp|
|View Product||View Product||View Product||View Product|