|Product Depth (in.)||4||Product Height (ft.)||0|
|Product Height (in.)||4 in||Product Width (ft.)||0|
|Product Width (in.)||4 in|
|Canopy Parts and Accessory Type||Accessory Kit||Color Family||Metallic|
|Outdoor Living Product Type||Canopy Part/ Accessory||Pack Size||1|
|Product Weight (lb.)||2 lb||Returnable||90-Day|
|Manufacturer Warranty||Lifetime Warranty|
A: Yes, i have over 12 feet on mine .
A: Correction to the above answer. The cable is 1/8", not 3/8 ". So the cable grip you need is also 1/8". Sorry for my mistake.
A: I was finally able to answer my own question by reading through the comments of users of other shade sail attachment kits. The answer is that on the side that you are not using a ratchet device, you run the cable wire through the corner ring of the shade sail and through the loop at the end of the cable on one end, and you run the cut end through a device called a cable grip and then through the eye bolt on the attachement point. Then you run the cut end back through that little cable grip and tighten the two tiny nuts to grip them together so the cut end can't slip out. This is a tiny little U shaped device with two screws and two nuts which clamps down on the two lengths of cable so they can't slip apart. It costs a few cents apiece and SHOULD have been included in this kit. If you are using 3/8" inch cable (which this is), then you need a 3/8" cable grip. Maybe everyone else in the world knew this already, but I did not. And it was quite annoying to have to research to learn it and then go out and find the right device.
A: Hi Renoel, good question. You're gonna want to loop the cable wire through the shade sail corner and then loop one of the looped ends through the other, pulling all the way. On the other end, you'll have a free looped end through which the accompanying carabiner will fit through. The carabiner will serve as the link between the cable wire and the pad-eye.
A: Hi Renoel, good question! You'll only need one of these kits. The four attachment points are: 2 pad eyes and 2 ratchet winches. Four 12' cable wires come with the kit for extension.
A: I installed a 16x20 with one kit. The cables included are of high quality and all you need to extend the ends of the sail.
Sign up for emails & save 10% on select home decor. Valid on select items.