#1 Home Improvement Retailer

Internet #100654126

Model #025326

Store SKU #106067

$13.04
  • EPA-registered to eliminate and prevent mold
  • Penetrates to the roots of mold
  • No bleach or harmful fumes
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

+
+
Price:
$1304

Product Overview

Concrobium Mold Control is a patented solution that effectively eliminates and prevents mold and mildew with no bleach or harmful chemicals. It can also be used to get rid of musty odors. The product works as it dries by crushing mold spores at the roots and leaves behind an invisible antimicrobial shield that prevents future mold growth. Use Concrobium Mold Control for mold and mildew clean-up and prevention, general interior maintenance, water damage restoration and during construction/renovation (paint prep and pre-treatment of building materials). It works great on hard and fabric surfaces such as drywall, wood, composite wood, plastic, concrete, siding, shingles, metal, brick, stone, tile, grout, stucco, fabric (sports bags, clothing), furniture, upholstery, flooring, rubber (front load washing machine gasket) and more.
  • Eliminates, cleans and prevents mold and musty odors
  • Contains no bleach, ammonia or volatile organic compounds (VOCs)
  • Penetrates to the roots of mold and leaves an antimicrobial shield
  • EPA-registered
  • Works on drywall, concrete, wood, masonry, siding, shingles, stone, grout, plastic, tile and many more surfaces
  • Ideal for basements, bathrooms, laundry rooms, attics, closets, garages, windows, car interiors, boat interiors and RVs
  • Colorless and odorless
  • Effective on hard and fabric surfaces
  • Click here to learn more about our Healthy Home Eco Options
  • Note: product may vary by store

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Mold & Mildew Removers

Do It Yourself Mold Test Kit, DIY At Home Mold Kit
current product
32 oz. Mold Control
14.1 oz. Mold Control Aerosol32 oz. Instant Mold and Mildew Stain Remover
BrandMold ArmorConcrobiumConcrobiumRMR BRANDS
NameDo It Yourself Mold Test Kit, DIY At Home Mold Kit32 oz. Mold Control14.1 oz. Mold Control Aerosol32 oz. Instant Mold and Mildew Stain Remover
Price
$987
$1197
$1197
$1970
/ounce
Ratings
(352)
(1661)
(35)
(80)
Where to UseBathroom,Car Exterior,Car Interior,Floors,Furniture,Kitchen,LaundryBathroom,Laundry,Plastic SurfacesBathroom,Floors,Furniture,LaundryBathroom,Floors,Kitchen,Outdoor,Specialty
FeaturesNo Additional FeaturesAntimicrobialAntimicrobial,Eliminates Odor,Kills MildewWith Bleach
Product Size1 OZ-Ounce32 OZ-Ounce14.1 OZ-Ounce32 OZ-Ounce
Concentrated or Ready to UseReady to useReady to useReady to useReady to use
Pack Size1111
Recommended SurfacesSpecialtyConcrete,Plastic,Stone,Tile,WoodCarpet,Fabric,RubberConcrete,Painted Surfaces,Stone,Wood
View ProductView ProductView ProductView Product

Specifications

Dimensions

Container Size1 QuartProduct Size32 OZ-Ounce

Details

Concentrated or Ready to UseReady to useFeaturesAntimicrobial
FormulationRegular StrengthPack Size1
Paint Prep & Cleanup Product TypeMold & Mildew ProductProduct Dispenser TypeTrigger Sprayer
Product FormLiquidRecommended SurfacesConcrete,Plastic,Stone,Tile,Wood
Returnable90-DayTypes of Surfaces CleanedMulti-Purpose
Where to UseBathroom,Laundry,Plastic Surfaces

Warranty / Certifications

Certifications and ListingsEPA ApprovedManufacturer WarrantySatisfaction Guaranteed. Please call 1-866-811-4148 for more information.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4
    out of 1,661 reviews
  • 73%recommend this product
Filter by:
Showing 1-10 of 1,661 reviews
Hoping for a clean saddle
After calling the number on the product to see if I could use it on my saddles. I went by the directions I used it twice on my favorite saddle. To start with I thought it worked great but the next day the mold was coming back.
by
Response from Rust-OleumSupportJan 25, 2022
Let's see what we can figure out Peggy. For best results using Rust-Oleum Concrobium Mold Control, apply in a thin, even layer over the affected surface, allow to completely air dry. With a Mold Control dampened cloth or brush, scrub the surface to clean away any remaining mold stains and residue. Mold Control works as it dries by crushing the mold spores at the roots and leaving behind an invisible antimicrobial barrier to prevent future mold growth. To protect against future mold growth, reapply Concrobium Mold Control on vulnerable surfaces.
- Rust-Oleum Product Support 6 Rustoleum
  • Verified Purchase
Didn't do anything
I read the reviews that said this product didn't remove mold but I stupidly bought it anyway. I also read the company's responses to those people telling them to go and spend another $18 on yet another of their products that will remove the stains that this product leaves behind. No thanks. I returned the product and I'll go back to using bleach.
by
    Damages Wood Furniture Finishes!
    We bought Concrobium Mold Control and it ruined the finish on our antique furniture. It stripped stain down to the wood on an antique desk and dulled the shine off an antique chair. Be extra careful using this product as it can ruin your furniture even though the manufacturer claims it is safe to use on wood finishes. Beware!
    by
    Response from Rust-OleumSupportJul 23, 2021
    That's not what we expect to hear! While Rust-Oleum Concrobium Mold Control is suitable to use on most surfaces, we always recommend applying in a test area first. It is also essential that any finish or stain on the surface is in good, sound condition.
    - Rust-Oleum Product Support 3 Rustoleum
      3 found this review helpful
      I Worked In Mold Remediation In Lafayette For 12 Years, This Product is Junk!
      I Worked In Mold Remediation In Lafayette For 12 Years, This Product is Junk... I had worked in and around the Lafayette & West Lafayette area for well over a decade providing services which included Mold Remediation, Isolation & Removal. Often times some mold/mildew spots were so minor that we could effectively use bleach/peroxide & distilled water solution to kill the fungus. But, once in a while, the mold/mildew growth was indeed so advanced, that more drastic measures were necessary. But of all the chemicals we had employed for mold/mildew removal and blockage, this product is definitely my LEAST favorite! I am renovating a garage and when we gutted the garage down to the bare studs, we discovered some light growth of mold in one corner near the overhead door. The spot wasn't that big, probably about 12-15 Sq ft total growth accumulation spread out over 8-10 ft of wall space. I figured I would give this product a chance, but accomplished no visible results. Even after eventually applying an entire gallon of this product, I was unable to detect ANY degree of mold/mildew remediation from the affected area. In the end, I truly felt as though this was about the equivalent of spraying plain tap water onto the mold/mildew growth... There was NO visible change of any kind. Very disappointing, and I will be resorting to the tried & true application of bleach, peroxide & distilled water. * I have attached pictures of the treatment spots in question. These images are the AFTER pictures, and having waited about 4 hours to see if the effects were gradual. But, as you can see, the mold/mildew remained untouched. I did not get before pictures, but I was not expecting to have any issues, so I did not think it would be necessary.
      by
      Response from Rust-OleumSupportJun 17, 2021
      Let's see what we can figure out. Rust-Oleum Concrobium Mold Control eliminates mold, it is not a mold stain remover. The effective way to eliminate mold and remove the stains would be to first apply Mold Control in a thin even layer over the affected surface, allow to dry completely. Mold control works as it dries by crushing mold spores at the roots. Once completely dry the mold will be eliminated, even if mold stains remain. Next use Concrobium Duo Blast Mold & Mildew Deep Stain Remover on the mold stains, following the application directions of on the back of the bottle. Once and stains have been removed apply Mold Control again on those areas, allowing to air dry. This will effectively remove the mold and the mold stains.
      https://www.homedepot.com/s/duo%2520blast?NCNI-5
      - Rust-Oleum Product Support 6 Rustoleum
        18 found this review helpful
        We pulled tile off the wall and found it covered with black yuck. Thought I'd give this product ...
        We pulled tile off the wall and found it covered with black yuck. Thought I'd give this product a try - mostly because it had no VOCs. I followed the instructions and BAM - it knocked down the yuck. Because the drywall was gross, I scrubbed the black off and did another application. Looks perfect now. We can retile the backsplash and are confident that Mold Control will prevent further growth. Awesome stuff!
        by
        • DIY
        • Verified Purchase
        • Recommended
        7 found this review helpful
        This product works great when used correctly. Spray a light even coat on all the mold. Let it dry...
        This product works great when used correctly. Spray a light even coat on all the mold. Let it dry completely to kill the mold to the root. Respray a light even coat a small section at a time and wipe clean with a paper towel.
        by
        • Verified Purchase
        • Recommended
        8 found this review helpful
        It depends on the situation it worked in my husband shower where it could dry well but when my re...
        It depends on the situation it worked in my husband shower where it could dry well but when my real estate client used it in his crawl space for fungal growth it did not kill all of it and he used twice as much as was recommended in a fogging machine. :( that's when it's important that it work well.
        by
        Response from Rust-OleumSupportJul 16, 2020
        Thank you for sharing your experience and providing this feedback on our Concrobium Mold Control. If a crawl space has a severe amount of mold or mildew, we do suggest using a cold fogger to ensure that all surfaces are reached evenly with the Mold Control. - Rust-Oleum Product Support 2 Rustoleum
        • Verified Purchase
        4 found this review helpful
        WOW
        I’m so impressed with this spray. I sprayed my shower door, let it sit for a few minutes and when I scrubbed the mold came off so easily. Definitely recommend this product
        by
          • Recommended
          1 found this review helpful
          I wanted to believe in this product after some of the positive reviews, I follow the instructions...
          I wanted to believe in this product after some of the positive reviews, I follow the instructions as the manufacturer recommends and I did not see and difference whatsoever. I treated a small section and right next to it I treated with bleach, I have attached some side-by-side photos so you can compare, the section treated with Concrobium has little to no effect over the mold while the bleach side looks much better. Don't waste your money on this.
          by
          Response from Rust-OleumSupportMar 30, 2020
          Something is amiss here! Rust-Oleum Concrobium Mold Control eliminates and prevents mold with no bleach, ammonia of VOC's, it is not a mold stain remover. Apply Mold Control in a thin even layer over the affected surfaces, allowing to dry completely. Mold Control works as it dries by crushing mold spore at the roots. For mold and mildew stain removal use Concrobium Duo Blast Mold & Mildew Deep Stain Remover, this product is designed to remove mold stains.
          https://www.homedepot.com/p/Concrobium-33-8-oz-Duo-Blast-Mold-and-Mildew-Deep-Stain-Remover-029-6670/305195647
          - Rust-Oleum Product Support 6 Rustoleum
            4 found this review helpful
            This product is completely useless for getting rid of and preventing mold. Might as well spray w...
            This product is completely useless for getting rid of and preventing mold. Might as well spray with plain water!
            by
            Response from Rust-OleumSupportFeb 3, 2020
            Oh no, something is amiss here! Rust-Oleum Concrobium Mold Control effectively eliminates and prevents mold with no bleach, ammonia or VOC's. After applying a thin layer of Mold Control over the affected surface mold spores are crushed as it dries, eliminating mold at the roots. After using Mold Control to eliminate mold, stains may remain since this is not a mold stain remover. For mold stains Rust-Oleum Concrobium Duo Blast Mold & Mildew Deep Stain Remover is very effective.
            https://www.homedepot.com/p/Concrobium-33-8-oz-Duo-Blast-Mold-and-Mildew-Deep-Stain-Remover-029-6670/305195647
            - Rust-Oleum Product Support 6 Rustoleum
              3 found this review helpful
              Showing 1-10 of 1,661 reviews