#1 Home Improvement Retailer

Internet # 323043403

Model # FB21

Store SKU # 1008778090

21 in. Half Round Pry Bar

  • Ergonomic Design to fit comfortably in the user's hand
  • Precision edges for better access without damaging surroundings
  • Heat treated forged steel maximizes product life and durability
  • View More Details
0 in stock
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use.


  • Ergonomic design - Half-round bar is designed to fit comfortably in the user's hand
  • Precision ground edges allow for nail pulling with less material damage
  • Highly durable and heat-treated forged steel designed to maximize product life by 2X versus the competition
  • High-viz corrosion resistant rawhide finish
  • 3 beveled nail slots allow for easy prying and access at any angle
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 323043403

Model # FB21

Store SKU # 1008778090

Additional Resources

Shop All Crescent


Dimensions: H 2.5 in, W 1.75 in, D 21 in


Bar length (in.)


Product Depth (in.)

21 in

Product Height (in.)

2.5 in

Product Width (in.)

1.75 in


Hand Tool Type

Pry Bar



Number of nail slots


Number of Pieces


Pack Size




Tools Product Type

Hand Tool

Warranty / Certifications

Manufacturer Warranty

Full lifetime

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

4.7 out of 5

  • 4.7 out of 199 reviews
  • 93% recommend this product
Filter by:
Showing 1-10 of 199 reviews
It bent!
One of the tongs on the flat side of my bar bent as I was using it to pry. I'm not that strong! I think the product should be stiffer.
This review is from 15 in. Flat Pry Bar with Grip
    Super Easy to Handle Pry Bar!
    This review is for the Crescent 15 in. Flat Pry Bar with Grip. This pry bar is a nice size to easily handle, not too big not too small just perfect for most pry jobs. The handle has a very nice rubber grip which is easy on the hands and makes tedious pry jobs a lot easier. There are three beveled nail slots which makes it very easy to access just about any angle. The weight and balance of the bar is also right on which again makes for much easier jobs. I used this bar to pull baseboards in my sons house got all the boards off without damage to the walls. This is a great pry bar for almost any job I highly recommend it.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    This give you the leverage you need!
    This is a great and very strong pry tool. The design is simple but well thought out. It is long enough to give you the power of leverage but not too long or heavy to carry. It has two different ends for various applications. The bent end allows a nice grip under boards and such. The straight end allows you to get in tight spaces to get the job done. There is even a teardrop at the end of the bar to use to pull nails.
    • Recommended
    Convenient Size
    The Crescent FB15-06 15-inch flat pry bar is a convenient size, not too big to be cumbersome and not too small be ineffective. It has a comfortable rubber grip and will pry up nail heads and pulls nails easy. I found it particularly useful in removing baseboard molding from the wall. I used the small end to start it and the long end to pry it off the wall.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    Tough Pry Bar
    The Crescent flat pry bar is, in my opinion, the best pry bar of its competitors. It is super easy to use and the grip is especially easy. It is made of forged steel, heat treated, and made for durability. It has a rawhide finish and has a corrosion resistant finish. There are three beveled nail slots which helps it to access any angle. I have the 15” pry bar, but it comes in 7” and 13” as well. The measurements are: 2.481 in high, 1.811 in wide, and 15.158 in deep. It is very versatile and the over-mold grip provides a comfortable grip, control, and safety when using force.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    Good mid size pry bar
    The more DIY you do the more you realize having the right tools makes things better and easier. I have tool belt size pry bars/demo tools and large pry bars/demo tools, but needed a nice middle ground for tougher jobs that didn't need a full size crow bar or something else destructive. This is a nice 21 inch long bar that works great for heavier trim inside and out. It has a good nail notch on both ends and provides good strength when needed. This is basically like a normal straight bar, but has a slight curve along the length which I tried to capture in one of the pictures. This is a nice tool because it has a fairly thin end for inserting under nails, between boards, or wherever you need it while also having good bulk for it's 21 inch size so you don't feel like it will break. Overall a nice middle ground demo tool.
    • Recommended
    Sturdy and Well-Made Pry Bar
    The Crescent 15-inch Flat Pry Bar with Grip arrived last week and I'll be ready to use it on my construction projects. It's very sturdy and I like the rubberized grip which will help minimize slips while using it to remove nails and old boards. The edges are sharply honed to dig into materials and there's a notch on each end to grasp and remove nails. For its size, I believe this is about as good as it gets.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    Extra Length - More Leverage
    The 21 inch half round pry bar is about 6 inches longer than the usual pry bars of that style. The extra length gives you more leverage for tougher tasks using less effort. Crescent gave thought to this tool before making them by adding a half round curve to the shank in order to eliminate any bending of flexing. A definite plus to have in any workshop.
    • Recommended
    Well made for lasting use
    In review of this Cresent 15in. flat pry bar with grip. This pry bar seems to be well made with high strength steel I've used a non name brand one of these and put my strength into it and had the bend instead of doing its job. With this Cresent pry bar I don't think I would possibly ever have that happen. It has a little flexibility but doesn't lose the shape whether pulling nails or prying things apart. When tools are made with good quality steel and materials they last. The rubber grip in the center works well for light duty jobs. when you need the full 15" of leverage you may want to wear gloves both ends are for prying. I have other Cresent tools and don't have any complaints.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    Makes quick work of dismantling
    If you are taking something apart or doing some demolition work you need this tool! Beveled edges on both sides allows you to slide this in between joints and pry them apart. Pulling nails is a snap with this pry bar using either end or the vee-shaped cutout on the bar. The rubber grip handle reduces slippage when you are applying lots of force. And I'm always a fan of tools with the "Crescent" name on them- they last a long, long time.
    This review is from 15 in. Flat Pry Bar with Grip
    • Recommended
    Showing 1-10 of 199 reviews