Works with flanges that are 1" above & 1-1/2" below the floor
Works with any drain size & toilet can be repositioned as needed
Product Details
The All-In-One Toilet Installation Kit includes the Perfect Seal Wax Ring and Zero Cut Toilet Bolts, taking the guesswork out of toilet installation. The Perfect Seal is a universal toilet wax ring that works with most drain sizes and flange depths. Whether the flange is ½ inch above the floor or 1-1/2 inches below, the Perfect Seal guarantees a perfect seal every time. The patented design combines specially designed rubber gaskets with encapsulated wax that forms a seal three times stronger than a wax ring without the mess and allows the toilet to be repositioned if needed during installation. The Zero Cut Bolts eliminate the hassle of typical toilet bolts that are too long, wobble and are difficult to line up when setting the toilet. The universal bolts work with flanges above or below the floor and can be adjusted in height from one inch to three inches without cutting, removing the threat of chipping or cracking the toilet due to over tightening. The sliding adapters tighten the bolts and attach the low profile bolt caps. The All-In-One Toilet Installation Kit makes toilet installation easier.
Kit includes the Perfect Seal Wax Ring and Zero Cut Bolts
Toilet installation made easier! Use both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
Creates the perfect seal between the floor and drain
Works with flanges that are inch above or 1-1/2 in. below the floor for most toilet installations
Upper bolt screws into double threaded body while the lower bolt retracts and tightens from below
No cutting required! Brass and stainless steel bolts can be easily turned by hand for the perfect height
Mess free and hassle free! Zero Cutting. Zero Tools. Zero Problems.
Helpful Tip:Â When the toilet does not sit flush to the floor, the black plastic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Specifications
Questions & Answers
11Questions
Q:I am in an older house built in the 1920's; it has 6 inch cast iron sewer pipes what version fit's
by|Nov 24, 2022
1 Answer
Answer This Question
A:Â Thank you for your interest in Danco products and for your inquiry. To better assist you please contact Product Support at 1-800-523-5135 Monday-Friday 9 a.m. - 3 p.m. CST
Product Support
by|Dec 5, 2022
Q:I have this product and installed it and it was great! But I?ve removed the sheet vinyl flooring and will be installing tile flooring. With the new flooring being higher, will I need to get a new ring, or can the blue part of the ring be pulled up?
by|Nov 19, 2022
1 Answer
Answer This Question
A:Â Hello,
Thank you for choosing Danco. We recommend using a new Perfect Seal. Since the level of the flange compared to the floor is changing, we're not sure that the toilet will be dealing with the perfect seal
by|Nov 28, 2022
Q:Are the two depths specified a range?
by|Dec 9, 2021
2 Answers
Answer This Question
A:Â In my case the flange was about 1/2" below surface, I set everything as is on the flange. Placed the toilet on top of the seal but was not sitting even on the floor, so I took out the black piece from inside the seal assembly per video instruction. The toilet sat perfectly on the floor and no leaks ever since.
by|Jan 17, 2023
1 found this answer helpful
A:Â Thank you for your interest in Danco products and for your inquiry. The Perfect Seal will work for flanges that are up to a 1/2" above and up to 1-1/2" below. It will work for your application.
by|Dec 17, 2021
Q:What size drain does this fit? I am not the person who will be installing, so I don't know if I have a 2, 3, or 4 inch drain. My house was built in 1964. I am only replacing the toilets because I want one piece toilets. Thank you
by|Aug 31, 2021
1 Answer
Answer This Question
A:Â Thank you for your interest in Danco products and for your inquiry. It is designed to fit a 3" & 4" flanges.
by|Jan 17, 2023
1 found this answer helpful
Showing 1-4 of 11
Customer Reviews
4.7 out of 5
(102)
4.7
out of 102 reviews
98%recommend this product
586
49
31
22
14
Filter by:
Showing 1-10 of 102 reviews
May 5, 2020
Easy very simple with no mess, love the kit, the screw cover sits flushed.
Easy very simple with no mess, love the kit, the screw cover sits flushed.
by
Verified Purchase
Recommended
Feb 22, 2018
Wow just wow. Where has this ring been all these years. If your tired of the sticky gooey mess th...
Wow just wow. Where has this ring been all these years. If your tired of the sticky gooey mess that a wax ring makes, then this is for you. I have installed 100's of toilets using the old wax style ring and sometimes had to use two if it didn't sit right the first time. Problem solved with this reusable ring and no mess what so ever, except for cleaning up the old wax residue . Check out the photos I attached for a closeup of the ring itself. The instructions are excellent and come in English and Spanish with lots of photos.
The Danco Perfect Match All-In-One Toilet Installation Kit is a great product. If you have ever h...
The Danco Perfect Match All-In-One Toilet Installation Kit is a great product. If you have ever had to use the wax ring type of installs and then had to re-position the toilet you know what an issue that can be. The old style wax rings fall off or rip apart but not to with the Danco Perfect Match All-In-One Toilet Installation Kit . The grey part has the wax ring under it so you can easily move it around. It makes creating a tight seal a lot easier. I wish I had this years ago, would have saved a lot of headaches.
The Next by Danco All-In-One Toilet Installation Kit with Perfect Seal & Zero Cut Bolts is the on...
The Next by Danco All-In-One Toilet Installation Kit with Perfect Seal & Zero Cut Bolts is the only product I will use from now on.
I have installed toilets, both residential and commercial, and this is by far the best kit I have ever used.
With a traditional wax ring, once you have set the toilet, if you have to remove it for some reason, you almost always need to replace the wax ring. No so with this design. If you need to make adjustments, you can, without destroying the ring.
The bolt height is adjustable up to 3". There is no need to cut them and allows for perfection even if the floor is not level. The low profile caps have a very clean look that I really like.
Long Overdue Innovation Making a Tough Job Easier
I dearly wish that I had had this All-In-One toilet installation kit 30 years ago when I replaced my first toilet. And if you have ever done this, you know that dealing with old mounting (closet) bolts that were shortened with a hacksaw is about the hardest part of the job, even though they are literally the smallest element of the effort. I remember several trips downstairs first to get a set of vice grip pliers, then a second trip for a pair of needle nose pliers with the diming hope I’d ever get the old nuts off short of using a hacksaw horizontally while lying on the bathroom floor. Then a third trip downstairs for the hacksaw…
So this Danco kit’s ingenious Zero Cut Bolts make any subsequent commode removal very easy and straightforward. The seal itself contains a traditional wax seal underneath the assembly, and then an optional (determined by your finished floor height) flexible plastic spacer at the top to ensure there is no leaking later. I highly recommend using this kit when fixing leaking toilet bowls (like I did) or new installations because subsequent removal efforts will be so much easier—and no hacksaw required.
Easy and simple install. I would highly recommend when installing...
Easy and simple install. I would highly recommend when installing toilets.
by
Verified Purchase
Dec 22, 2022
Installed seal and toilet as instructions said and pressed down....
Installed seal and toilet as instructions said and pressed down. The rubber surrounding the wax ring forced a good portion of the wax ring down the sewer pipe. Which would have resulted in a blockage had I not checked. Much cursing followed as I gloved up and had to clean out the pipe. Will never use a wax seal again.
by
Verified Purchase
Dec 10, 2022
Excellent product.
Excellent product. Easy to install. Works flawlessly.
by
Verified Purchase
Recommended
Dec 9, 2022
Excellent product that makes life more simple....
Excellent product that makes life more simple.
by
Verified Purchase
Dec 8, 2022
Having used this kit in the past, I knew it...
Having used this kit in the past, I knew it would work as advertised.
Makes instation a breeze.
The Korky standard 2 inch EasyFix Flush ValveThe Korky standard 2 inch EasyFix Flush Valve Repair Kit is designed to repair corrosion or deposits on plastic and brass flush valve seats. The kit includes a Korky Plus flapper, a plastic flush valve seat and silicone sealant to repair corroded flush valve seats without removing your toilet tank. The engineered materials resists chlorine, bacteria, city water treatment, hard water, and well water. Silicone seals within 15 minutes. Made of flexible rubber for a tight seal and easy to install, the 2003BP Includes: 2001BP Flapper, Stainless Steel Chain, Plastic Flush Valve Seat and Tube of Silicone Sealant.View Full Product Description
P6000-ECA-WS1 1.6 GPF Closet Repair Kit
Repair or retrofit existing flush valvesRepair or retrofit existing flush valves with this OEM (original equipment manufacturer) Zurn P6000-ECA-WS1 1.6 Gallons per Flush (GPF) AquaVantage Closet Repair Kit. Constructed of chemical resistant materials for long lasting quality and dependability, including a clog resistant, dual seal thermoplastic diaphragm with a triple filtered by-pass. Designed to be used in Zurn AquaVantage and Sloan Royal closet flush valves. For sustainability and performance, choose AquaVantage.View Full Product Description
P6000-ECA-WS 3.5 GPF Closet Repair Kit
Repair or retrofit existing flush valvesRepair or retrofit existing flush valves with this OEM (original equipment manufacturer) Zurn P6000-ECA-WS 3.5 Gallons per Flush (GPF) AquaVantage Closet Repair Kit. Constructed of chemical resistant materials for long lasting quality and dependability, including a clog resistant, dual seal thermoplastic diaphragm with a triple filtered by-pass. Designed to be used in Zurn AquaVantage and Sloan Royal closet flush valves. For sustainability and performance, choose AquaVantage.View Full Product Description
31705 Water Module Assembly Kit Replacement Valve for Aqua-Magic V
The Thetford 31705 Water Module AssemblyThe Thetford 31705 Water Module Assembly Kit is a replacement for your old or worn-out original parts. It is designed to fit both the low and high Aqua-Magic V models. Included is a valve and the hardware needed for installation. This Aqua-Magic V water module also comes with instructions for ease of use.View Full Product Description