Internet #305609180

Model #DWASHRIR

Store SKU #1003318777

18-Gauge Impact Ready Shears Accessory

  • 1/4 in. hex shank
  • 360° swivel head allows for maneuverability when cutting
  • Cuts up to 18-Gauge material
  • See More Details
$4884
Limit 5 per order

Product Overview

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to up to 18-Gauge material including but not limited to : sheet metal, corrugated sheet metal, duct, asphalt shingle, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360° swivel head that allows for maneuverability when cutting. Connects via standard 1/4 in. hex shank. This attachment works with most 18-Volt to 20-Volt impact driver and drills, regardless of brand. Attachment only, drill not included.
  • Cuts up to 18-Gauge material including but not limited to: sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber
  • 360° swivel head allows for maneuverability when cutting
  • 1/4 in. hex shank
  • Works with most 18-Volt to 20-Volt impact driver and drill tool brands






Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Height (in.)
11.75
Product Length (in.)
5.875
Product Width (in.)
2.75 in

Details

Color Family
Yellow
Ideally Used With
Impact Drivers
Material
Multi-Surface
Power Tool Accessory Type
Other Accessory
Product Weight (lb.)
1.59
Returnable
180-Day
Tools Product Type
Power Tool

Questions & Answers

9Questions15Answers

Will this shear adapt to a Dewalt DCD771 drill or impact driver DCF885

Asked by RAY May 14, 2020
1
Answer

Yes. Install takes less than 5 min. It will work with any brand drill or 1/4 impact as long as the base is no wider than I think 3 1/2 inches.

Can this work for cutting 3/4" aluminium rods?

Asked by NewDIYer May 3, 2020
1
Answer

No. The jaws don't open far enough to get through anything thicker than what they spec.

18-Gauge Impact Ready Shears Accessory My question is will this tool fit my dewalt 20 volt max th...

Asked by joan May 1, 2020
1
Answer

Yes it fits perfect that's what I have it on works great.

Will this attachment fit and work with Ridgid Octane impact driver?

Asked by Tau April 26, 2020
1
Answer

We have not tested the DEWALT DWASHRIR with the Ridgid Brand.

Will these shears work to cut Hardie Fiber cement planks?

Asked by TheHammer March 26, 2020
2
Answers

I’m sure it will work and in a pinch I would but keep in mind it’s going to dull the blades quickly and most likely be done and need sharping after the one job

Will this work with the 18-Volt ONE+ Lithium-Ion Cordless 1/4 in. Hex Impact Driver?

Asked by Wes January 17, 2020
2
Answers

Yes I’ve been using the shears with a Ryobi 18v brushless 1/4 in impact driver.

Will it work on 18v dewalt

Asked by Rimline December 25, 2019
2
Answers

Don't know for sure because the tool arms might not be the same length as 20v drill

Will this attatchment work on another brand of drill , ex.) milwaukee?

Asked by Logan December 18, 2019
3
Answers

yes

will this work on RYOBI drill?

Asked by FRED November 17, 2019
2
Answers

Dear Fred,, ignore the rude answer from prev person,, I too have the Ryobi tools,, and yes the listing does state it works on all cordless drills,, but read the reviews about Ryobi,, it does not fit well, it has to do with where it connects on the battery, very sloppy and loose,, you can use it , but may need to modify,, be careful with it though,, look at other options where the shears attach to the rear of the drill, rather than the battery,, sometimes its not worth asking a question when you get a rude clueless answer from an internet TG,, hope this helps

Customer Reviews

  • 77 Customer Reviews
  • 4.4 out of 5 stars overall
96% of customers recommended.
Overall Ratings
5star-icon(49)
4star-icon(17)
3star-icon(5)
2star-icon(3)
1star-icon(3)
Sort By:
Good value, saves time, great quality, safe
Customer review from homedepot.ca logo
Great tool for square cuts or ribbed metal siding. Not great for diagonal cuts as it is too long and gets stuck on the ribs.
Was this helpful?
0
0
The tool is very easy to install to the drill. It is good to cut thin sheet of metal. Good and qu...
The tool is very easy to install to the drill. It is good to cut thin sheet of metal. Good and quality tool for everyday uses
Was this helpful?
1
0
This tool is awesome!!! Delivery to the store was...
This tool is awesome!!! Delivery to the store was right on time!!! The cost was better than reasonable, this attachment was easy to put on and saved me having to purchase another stand alone tool.
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Great for cable comstruction...
Great for cable comstruction
Was this helpful?
0
0
Works really great should have gotten one sooner...
Works really great should have gotten one sooner
Was this helpful?
0
0
make sure
Only fits older dewalts need to return. Home depot needs to ensure that people know and when i say older i mean more than 3 years
Was this helpful?
0
0
Response from DewaltProductExpertOctober 5, 2020
Hi, we're sorry to hear of the trouble you are having with the DWASHRIR. We would appreciate the chance to speak with and assist you. Please email us at WECARE@SBDINC.COM so that we may assist you with warranty. Please also reference case #12401976. Many Thanks, Mitzy DEWALT Customer Care
shipshewana in
Great Tool
Customer review from dewalt.com logo
I like it to cut sheet metal with and to cut rebar ties and 50 guage wire with
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers