#1 Home Improvement Retailer

Internet #301952221

Model #IOS-DPBIMF-WH

Store SO SKU #1002491490

IOS Series 500-Watt In-Wall PIR Vacancy and Occupancy Sensor Switch Decorator 150-Degree Coverage Pattern, White

  • For use with CFL, fluorescent, incandescent lighting loads
  • Great addition to laundry rooms, closets and garages
  • Adjustable time delay
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Intermatic's energy saving occupancy sensor monitors virtually any area within a home, small business or commercial building. This model incorporates passive infrared (PIR) technology to detect human presence in a room. It will monitor a specific area to detect heat generated naturally by people. When the heat is detected the lighting will automatically turn ON, then OFF again when the presence is no longer detected. This sensor is simple to install and meets California Title 24 requirements.
  • Passive infrared (PIR) sensing technology for presence detection
  • Adjustable PIR sensitivity
  • Adjustable time delay of 15-second to 30-minutes
  • Adjustable ambient light sensor over ride
  • Coverage: 150,980 ft. with non-obstructed views
  • Compatible with incandescent and inductive loads, minimum 25-Watt load required
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Motion Sensors

current product
IOS Series 500-Watt In-Wall PIR Vacancy and Occupancy Sensor Switch Decorator 150-Degree Coverage Pattern, White
IOS Series 500-Watt Occupancy Switch with Manual Override In-Wall Decorator 150-Degree Coverage Pattern, WhiteTop RatedDecora Motion Sensor In-Wall Switch, Auto-On, 2.5 A, Single Pole, WhiteBest SellerMaestro 2 Amp Single-Pole Motion Sensor Switch, White
BrandIntermaticIntermaticLevitonLutron
NameIOS Series 500-Watt In-Wall PIR Vacancy and Occupancy Sensor Switch Decorator 150-Degree Coverage Pattern, WhiteIOS Series 500-Watt Occupancy Switch with Manual Override In-Wall Decorator 150-Degree Coverage Pattern, WhiteDecora Motion Sensor In-Wall Switch, Auto-On, 2.5 A, Single Pole, WhiteMaestro 2 Amp Single-Pole Motion Sensor Switch, White
Price
Ratings
(9)
(56)
(794)
(1010)
Electrical FeaturesWall Plate IncludedWall Plate IncludedProgrammableProgrammable
Wattage (watts)800 W500 W300250
Mounting TypeIn-WallIn-WallIn-WallIn-Wall
Indoor/OutdoorIndoorIndoorIndoorIndoor
Motion Sense TypeOccupancyOccupancyOccupancyOccupancy
Voltage120 volt120 volt120 volt120 volt
Field of View150 Degrees150 Degrees180 Degrees180 Degrees
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
2.75 in
Product Height (in.)
1.63 in
Product Width (in.)
1.44 in

Details

Amperage (amps)
4.5 A
Color Family
White
Color/Finish
White
Commercial/Residential
Commercial,Residential
Compatible Bulb Type
CFL,Incandescent,LED
Coverage Area (sq. ft.)
980
Electrical Features
Wall Plate Included
Electrical Product Type
Motion Sensor
Field of View
150 Degrees
Indoor/Outdoor
Indoor
Maximum Distance (ft.)
490
Motion Sense Type
Occupancy
Mounting Type
In-Wall
Pack Size
1
Rating
General Purpose
Returnable
90-Day
Voltage
120 volt
Wall Plate Included
Yes
Wattage (watts)
800 W

Warranty / Certifications

Certifications and Listings
cUL Listed
Manufacturer Warranty
2-year limited

Questions & Answers

3Questions4Answers

Will this work in a utility room with boiler and hot water heater? Will the heat trigger the sensor?

Asked by Chrismwl February 26, 2021
1
Answer

As long as the temp in the room stays below 130 degrees, it will be ok

3 way switch replacement with motion sensor switch.

Asked by Richard February 12, 2021
1
Answer

Hello Richard. We do not make this in a 3-way model. You can wire two of these sensors in parallel to achieve this functionality if desired. Hope this helps.

Does this sensor need a neutral wire?

Asked by perrilee August 22, 2020
2
Answers

The IOS-DPBIMF-WH does not require a neutral wire.

Customer Reviews

  • 3.4
    out of 9 reviews
  • 60% recommend this product
Filter by:
Showing 1-9 of 9 reviews
no it doesen’t work the way it said it would...
no it doesen’t work the way it said it would on a two way stwitch
by REBECCA
Filled my needs. I had a switch that was not convenient. This took it's place and works great
Filled my needs. I had a switch that was not convenient. This took it's place and works great
by HomeDepotCustomer
Worked as expected. Please be aware that you should review the wiring diagram closely. The red wi...
Worked as expected. Please be aware that you should review the wiring diagram closely. The red wire on the switch is attached to the load.
by Instructor
The light would not turn off completely. Tried ever...
The light would not turn off completely. Tried ever configuration I could.
by HomeDepotCustomer
1 person found this helpful
4 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
Make sure for use on an incandescent load. There's a different model for CFL & LED. Technician in...
Make sure for use on an incandescent load. There's a different model for CFL & LED. Technician indicated easy to install.
by Michael
Everything was fine with this motion switch except it doesn't work with LED light bulbs. This sw...
Everything was fine with this motion switch except it doesn't work with LED light bulbs. This switch doesn't have a neutral connection so it passes through a small current in the off position and dimly lights the LED bulb. The Intermatic IOS-DPBIF-WH has a neutral connection to solve this issue. I wish this had been more clear in the product listing.
by SOVERDIY
4 people found this helpful
Could not get it to work, waste of money
Could not get it to work, waste of money
by Gwh
Works great for my attic lights. I kept forgetting to...
Works great for my attic lights. I kept forgetting to shut off the lights when leaving the attic. This takes care of it.
by Lou
Showing 1-9 of 9 reviews