A: Hi Steve, Thank you for reaching out, we can certainly assist you with that! The model disposal you purchased has our EZ connect mounting hardware, unfortunately that is not compatible with a square shaped drain. We do manufacture a disposal of similar spec with the traditional mounting hardware with mounting screws, the model KWD210-75MGR to be exact, this is compatible with the GDA-1 adapter to go into your new sink! Please feel free to reach out to us at 800-775-0703 or via email at firstname.lastname@example.org with any additional questions.
A: Hi DavidCA, Our round drain sinks do not require an adapter to use a disposal. Rather than connect a disposal to the drain, the disposal will replace the drain as it has its own flange and mounts directly to the sink.
A: Hi Karl, Thanks for reaching out to us. We would recommend using traditional garbage disposals for use with our GDA-1 as the function of pressing down the cover would not align with our GDA-1. Please feel free to contact us at 800-775-0703 or email us at email@example.com and let us know if you have any additional questions. Best regards, Mike Kraus USA
A: I don’t know. My disposal operates with a switch.
A: That’s a good question. I don’t know because my unit has a switch. However, the removable, round-rubber sound baffle/gasket still fits into the disposer’s opening below the square. Hope that helps.
A: No answer to this question, but you may have given me cause to get my plumber out to look at mine. It leaks occasionally. Thank you!
A: I’m not sure. I had mine installed by a plumber too and never had a leak. Is there any visible damage to the adapter, if not you may have to Get a different plumber.
A: I did not install this myself, but I don't think that the adapter was used. Did they try it without the adapter?
A: I bought this one a year ago. I like the square shape. It’s good quality, heavy metal, looks nice in square shape. The only thing I don’t like is it’s clogg up water in the sink, I have to pull it up to drain water down. I can’t find a mesh strainer in square shape in the store (like the mesh one in round shape). I hope they will have it in square shape in the near future.
A: Had no problem I install it myself plumber putty and worked like any round one does check close for any defects
A: Hi AA, Thanks for your inquiry. Our GDA-1 includes an installation manual that we recommend following for installation. It is also available directly on our website and via the link below: http://www.kraususa.com/pdf/GDA-1__05.pdf Please also feel free to call us at 800-775-0703 or email us at firstname.lastname@example.org with any questions. We’d be happy to assist you. Best, Mike Kraus USA
A: The adapter you described can only be installed in sinks with square drainage receivers. If your plumber installed in a normal sink with round drainage then leakeage may occur.