#1 Home Improvement Retailer

Internet # 202029423

Model # 21030967

Store SKU # 802605

Product Images

Top Rated

Firex 4-Pack Hardwired Smoke Detector with Ionization Sensor

Includes 4 units
$65.23
($16.31 /unit)
Apply Now
Pay $40.23 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Smoke alarm operates on a 120V wired powered source
  • 9-Volt alkaline battery provides protection during power outages
  • Independently tested/certified to meet strict safety standards
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. Contractor box contains 4 alarms, mounting brackets, batteries and wire harness all included. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

Highlights

  • Shop all Kidde fire safety products here
  • Hardwired 120-V power source with a nine-V battery back-up
  • Test/reset button - tests the smoke alarm circuitry and resets memory after an alarm has sounded
  • Large centrally located Test/Hush alarm control button
  • Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user's guide for complete instructions
  • Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
  • Constant green LED light indicates that AC power is connected
  • Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm or is in hush mode
  • Replacement chirp - alerts to replace alarm after 10 years of operation
  • Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom and other locations where required by law
  • Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home
  • 360-degree mounting bracket allows mounting from any angle
  • Kidde offers a full range of 120V AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
  • Compatible with Kidde, FireX, code one and sentinel products
  • UL Listed to show compliance with rigorous safety standards to prevent shock, fire, and mechanical hazards
  • *Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • UL/CSFM Ref. Kidde Part i4618AC
  • Shop all Kidde Smoke Detectors
  • Learn how to install a smoke alarm
  • Properly prepare your home for a fire emergency
  • Protect your home and family from fire damage using these preventative tips
  • Shop Smoke Detectors with our buying guide!
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 202029423

Model # 21030967

Store SKU # 802605

Specifications

Dimensions

Product Depth (in.)

1.8 in

Product Width (in.)

5.6 in

Details

Alarm Sensor Type

Ionization

Alarm/Detector Features

Battery Back-Up, Hush Button, Wireless Interconnect

Alert Type

Siren

Commercial/Residential

Home

Included

Batteries

Pack Size

4

Power Source

Hardwired

Returnable

90-Day

Voltage (V)

120

Warranty / Certifications

Certifications and Listings

UL Listed

Questions & Answers

Are these able to replace my current out of date smoke detectors?
BySep 29, 2026
1 Answer | 
Answer This Question

Hello. Possibly. Smoke alarms should be replaced every 10 years. However, whether this alarm is a suitable replacement depends on the type of alarms currently installed and the requirements in your area. We recommend checking with your local authority requiring smoke alarms, usually your local fire department, to determine exactly what type of smoke alarms are required, where they are required, and whether they are required to be interconnected. Once you know what type of alarms you are required to have, please contact Kidde Product Support at 1-800-880-6788 with your existing alarms available and we will be happy to help identify replacement alarms that meet those requirements.

By|Sep 29, 2026


    Will the new models fit the fadc 4816 connectors?
    ByJun 30, 2026
    1 Answer | 
    Answer This Question

    Hello. This is the I4618AC so not quite but close. There is no direct replacement for your alarms. That being said, you can use any of our current alarms to replace your older alarms. You will have to take down all of the older alarms before putting up any new alarms. You will have to change out the mounting brackets at each location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at each location or you can choose to use the KA-F2 adaptors to adapt the old plugs to this model of alarms The adaptors would plug into the old plugs and the new alarms would plug into the adaptors. Note that the adaptors will not work with our new Detect line of smoke alarms. The model for the adaptor pack is the 21028461 which includes the KA-F2 and the KA-B2 for some of the older BRK/First Alert plugs. Note that the adaptors will not work with our current line of alarms.

    By|Jun 30, 2026


      how do I silence the end of life beep?
      ByMay 1, 2026
      1 Answer | 
      Answer This Question

      Hello. This alarm doesn't have an end of life beep. However, the alarm does only have a 10 year life from first use. It should be replaced after 10 years. It may be beeping for low battery or because the smoke chamber need to be blown out with compressed air. Try cleaning out the alarm with compressed air around the side edges and changing the battery. If that doesn't resolve the issue or if this I4618AC isn't the alarm you actually have, please call us at 1-800-880-6788 with the alarm in hand.

      By|May 1, 2026


        I have 10 detectors hard wired together and found that they do not sound together after finding one detector was an off brand 9 or them r i4618a what can I plug in to get the entire system to function properly or is ten to many to b working together
        ByApr 8, 2026
        1 Answer | 
        Answer This Question

        Ten is not too many. This alarm should work with the I4618A. If they are not connecting together, that sounds like there is a loose wire somewhere and a wire has come out of a wire cap holding the wiring harness plug to the wires in your house. If that doesn't resolve the issue, call us with the alarms in hand on location at 1-800-880-6788 and we can troubleshoot more and figure out what is going on.

        By|Apr 9, 2026


          What adapter to fit an older firex smoke dedector with the 3 pin in parallel setup?
          ByJan 18, 2026
          1 Answer | 
          Answer This Question

          Hello. There is no direct replacement for your alarms. That being said, you can use any of our current alarms to replace your older alarms. You will have to take down all of the older alarms before putting up any new alarms. You will have to change out the mounting brackets at each location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at each location or you can choose to use the KA-F2 adaptors to adapt the old plugs to this model of alarms The adaptors would plug into the old plugs and the new alarms would plug into the adaptors. Note that the adaptors will not work with our new Detect line of smoke alarms. The model for the adaptor pack is the 21028461 which includes the KA-F2 and the KA-B2 for some of the older BRK/First Alert plugs.

          By|Jan 29, 2026


            what's the wiring configuration?
            ByJan 6, 2026
            1 Answer | 
            Answer This Question

            Hello. This alarm uses the older Kidde wiring harness and connects to a standard three‑wire household circuit: a black 120‑volt hot wire, a white neutral wire, and an optional red interconnect wire. The red wire is only used to link multiple alarms together so they can communicate with each other. For the exact wiring diagram, please refer to the I4618AC owner’s manual available on the Kidde website.

            By|Jan 6, 2026


              Comparable to i4618A?
              ByJan 1, 2026
              1 Answer | 
              Answer This Question

              Hello. Yes. This is the I4618AC, with the same wiring harness and the same mounting bracket.

              By|Jan 2, 2026


                I have 7 smoke detectors in my house i just need one to be a smoke and co detector, for the Kidde model # 21030967 what model Smoke and CO should i use ?
                ByDec 26, 2025
                1 Answer | 
                Answer This Question

                You can use any of our current hardwired smoke and carbon monoxide alarms. You can use the current 30CUAR. It will have a different mounting bracket and wiring harness but it will work with the other alarms. You will have to change out the mounting brackets at that location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at that location or you can choose to use the 20-9003 adaptors model 21032239 to adapt the old plugs to our new alarms. The adaptors would plug into the old plugs and the new alarms would plug into the adaptors.

                By|Feb 6, 2026

                  (1)

                  Viewing 1-8 of 614

                  Customer Reviews

                  4.4 out of 5

                  • 4.4 out of 5,138 reviews
                  • 78% recommend this product
                  Filter by:
                  Showing 1-10 of 5,138 reviews
                  False alarm
                  False alarm at the middle of night not recommended at all.
                  by
                  Response from Kidde ExpertDec 12, 2025
                  We know false alarms can be frustrating, and we want to help! You can find tips to troubleshoot and reduce them here:
                  kidde.com/support/smoke-alarms/false-alarm-actions or reach out to us at Kidde.product.support@carrier.com or at 1-800-880-6788 with the alarm in hand.
                    • Recommended
                    Bad or old batteries in March 2024 units
                    I got the four-pack in March 2024, and now in June 2025, little over a year later, one of the installed units started the low-battery beep. Took out the Kidde branded battery, and it indeed tests as having significantly reduced voltage. The bottom of the battery shows 10-2026. If that's the "best use by" date, then these units were sold with very old batteries. Disappointing.
                    by
                    Response from Kidde ExpertJul 7, 2025
                    We appreciate you sharing this with us, Pete. Our team is here to help and would be happy to discuss your concerns. Please give us a call at 1-800-880-6788 or email Kidde.Social.Care@carrier.com, so we can take a closer look.
                      2 found this review helpful
                      Avoid
                      Please seek alternatives. Late 2024 new home build features four of these miserable units. From installation, battery life has only been 6-months. False alarms a frequent problem despite vacuumizing & canned air flushing of the units. Product does not allow for longer lasting lithium batteries, ensuring "chirps," usually around 3:00 AM as the battery fails. Removing the battery will not stop the "chirp," as it's designed to sound if you try to leave the battery out of the unit.
                      by
                      Response from Kidde TeamMar 6, 2025
                      Thank you for bringing this to our attention, Jim, and we understand your concerns. We’re actively working on improvements to ensure a better experience in the future. If you’d like to provide additional information to our team, please give us a call at 1-800-880-6788 or email Kidde.Social.Care@carrier.com.
                        don't buy
                        Don't buy these if you have dogs. You can't tell which one is the one that's responsible for all the alarms going off, so you have to go around your house at 3 in the morning tearing these off the ceiling.
                        by
                        Response from Kidde TeamFeb 28, 2025
                        Hi there, we appreciate you taking the time to share your experience with us. Our team is here for you and happy to help. Please give us a call at 1-800-880-6788 or email Kidde.Social.Care@carrier.com, so we can further discuss your concerns about the Firex Hardwired Smoke Alarm.
                          Junk! Who made these?
                          These were installed in my new home by my builder November 2024 and they randomly went off at 4am. We were all so scared out of our beds and the dogs were pretty upset as well. And the alarms keep going off and this is after changing the battery and cleaning it with the vacuum and checking the humidity. Ours are hard wired and we shouldn’t need batteries but I was willing to try anything to get it to stop. These are junk. We will have to replace all of them if we plan to get any sleep. Who will reimburse us the cost for this junk? I wonder where they were manufactured…
                          by
                            Very easy to install. Comes with the battery. But it must be hardwired.
                            by
                            • Verified Purchase
                            Received Older Units With Expired Batteries
                            I just received these units yesterday - January 18, 2025 - and checked manufactured date and battery expiration. The units were manufactured in September 2020 and the batteries expired August 2023! Ten year units already four years old and batteries that expired almost a year and a half ago! Why are these unites still being sold as new?
                            by
                              4 found this review helpful
                              These were bought as replacements for the old ones that were kidde brand that were installed 12 years ago. The new ones have replaceable batteries so hopefully they all won’t die at the same time. The product is well made and has sturdy construction. I will always try to use name brand quality products for safety in and around my home. Kidde has been the go to for many years in our home. The old models that were just replaced with these were guaranteed to last 10 years. They lasted over 12. Never substitute price over safety, only use quality products from the company that you trust. Great product, would highly recommend for your home, business or other.
                              by
                              • Verified Purchase
                              1 found this review helpful
                              Fire hazard
                              Who knew my smoke detector would be the biggest threat to my home! This was purchased and installed in late 2021. Came home one day and discovered it had caught fire. Fortunately the damage was just surrounding the alarm and it didn't burn down my home!!
                              by
                                Easy to install, battery backup with ease of use
                                So many reviews about random alarm going off. Have had 3 of these for several years and no issues here. People need to read instructions. Although they are wired for interconnectivity, so if one goes off the others go off too, the battery still needs to be replaced every year. If you don't replace the battery, yes of course it's going to beep to tell you. It's common sense. And if you replaced the battery and it's still giving you problems then research and see why. No issues here and when you look at professional companies reviewing these and installing these you don't see many issues. If you don't want to replace battery every year then buy a 10 year battery unit. Just make sure they offer interconnectivity between each other.
                                by
                                  • Recommended
                                  Showing 1-10 of 5,138 reviews