Klein Tools’ Adjustable Length Screwdrivers function both as multi-bit screwdrivers and impact driver attachments. With these screwdrivers, there is no need to run back to your tool bag. Industrial-strength bits are conveniently housed in the handle. Simply adjust the length of the blades to allow for easier access or remove to use with an impact driver. Powerful rare earth magnets secure bits and fasteners while the Cushion-Grip handle provides outstanding comfort and control.
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful Rare-Earth magnets for securing bits and fasteners
A: It has the rubber grip but I don’t think I would use it on a live circuit. They do have the 600 volt insulated ones
by|Aug 7, 2023
A: No
by|Aug 7, 2023
Q:Is the handle insulated or rated for any voltage protection?
by|Aug 4, 2023
1 Answer
Answer This Question
A: No
by|Aug 7, 2023
Q:The bit holder is a bit tough to pull out; is there a way to spray some WD-40 inside the shaft to loosen the bit holder up?
by|Jan 4, 2023
2 Answers
Answer This Question
A: I would not use wd 40. I’m there a chance it could react with the plastic and rubber molding on the handle and deteriorate it. You should be able to use a silicone type lubricant for it though
by|Jan 5, 2023
A: It is not recommended to spray WD-40 into the bit holder area. Letting WD-40 remain on some of those plastics could damage them over time. Please contact Klein Tools Customer Service 800-553-4676 for assistance with your screwdriver.
by|Mar 6, 2023
Q:What is a combo bit? Two bits in one?
by|Dec 31, 2022
3 Answers
Answer This Question
A: A combo bit is a combination square and slotted bit.
by|Mar 6, 2023
A: The 2 combo bits are a combination of a square bit( Robertson bit) and a flat head in one, and they're used mainly for 8/32 and 6/32 electrical screws, as they have a square bit center aswell as a flathead indent so you can use one or the other, Normally, us electricians use flatheads on those but it tends to slip off the screw. This combo of both type of bits makes sure your there's no slippage and the screw head doesn't get destroyed. It's very convenient when working roughing in electrical j boxes and what not.
by|Jan 21, 2023
2 found this answer helpful
A: That's correct.
by|Jan 2, 2023
1 found this answer helpful
Showing 1-4 of 16
Customer Reviews
4.8 out of 5
(563)
4.8
out of 563 reviews
92% recommend this product
5
467
4
60
3
18
2
8
1
10
Filter by:
Showing 1-10 of 563 reviews
Aug 11, 2023
Another FANTASTIC product by Klein Tools. This stubby screwdriver has a few tricks worth discussion. Yes, it’s stubby but the handle end opens to reveal bit storage. And more towards the business end you will find a trigger style collar that allows you to adjust the bit shaft to multiple lengths. The bit shaft can also be utilized in a 1/4” quick chuck battery powered impact. Great tool!
by
Verified Purchase
Aug 10, 2023
Great adjustable stubby screwdriver
One of the best tools out there let's hope I never have to use it but if I do so far the Klein warranty hasn't been anything but poor very poor in my other Klein tools
by
Recommended
Customer review from Klein Tools
Jan 11, 2023
Home Depot is tricking you!
The same combo package is $5 less on a different sku. See photos.
I own this and would buy it again, but save yourself some money to buy other Klein tools too :)
by
Recommended
2 found this review helpful
Oct 5, 2022
I was in the process of buying a screwdriver set when my supervisor showed me this Klein screwdriver and said you’d be better off buying this one. He was right because now I don’t have use up lots of space in my tool bag searching for the right one.
This one screwdriver does it all
by
Verified Purchase
Recommended
Apr 27, 2022
for my work department it is very used
very good and useful
by
Verified Purchase
1 found this review helpful
Dec 14, 2021
bad quality
safety issues and parts not attached properly only one month off work
by
4 found this review helpful
Nov 16, 2021
PERFECTION!!!
[This review was collected as part of a promotion.] Absolutely best stubby I have ever bought, the adjustable length makes it so much more versatile than a regular stubby. And having the multi bits built in makes a perfect tool for the pouch. Being so affordable almost everyone of my coworkers have picked one and it’s an everyday carry!!!
by
Recommended
Customer review from Klein Tools
Sep 3, 2021
Must have for any electrician!
It's not as small as your typical "stubby" screwdriver. But it definitely gets the job done. Highly recommend to anyone in the trades.
by
Recommended
Customer review from Klein Tools
Jun 22, 2021
I love this screwdriver!!!!
This Klein Tools 15-in-1 Multi-Bit Ratcheting Screwdriver is everything I wanted and more. I had an older ratcheting screwdriver that kept coming apart and it got to the point where I just stopped using it because it was time consuming repairing it. I also had a multi-Bit holding screwdriver that I liked but the cap would pop off and the bits would end up all over the floor. I ended up settling on this screwdriver because it had everything I wanted, it was ratcheting, held additional bits, and is heavy duty. The cap on the bottom slides down and comes complete with several other double-headed bits held in place by a bit holding shaft, and then slides back up into place effortlessly (I believe the cap is held in place by magnets). I personally prefer the double-headed bits, I'm typically working with Phillips Head screws and if I'm switching between larger and smaller head sizes it's much easier to simply rotate the bit than pop out the bit holder and move between sizes. The bits are held in place by a tiny ball in the middle of the bit shaft. The ratcheting feature is very easy to use and strong, it doesn't feel flimsy at all, and you can set it to forward, reverse, and to the middle which sets the screwdriver to manual in case you didn't want to use the ratchet. This screwdriver has a nice, long, and durable shaft, and the the screwdriver itself is heavier than it looks (which makes me feel like I have more power in my turns). However, due to the larger size of this screwdriver, it may not fit in some of the smaller screwdriver holders you may be used to. But, for me, that's fine and I would definitely purchase again.
by
Recommended
3 found this review helpful
Mar 9, 2021
Favorite screwdriver
So happy with this screwdriver it was a lifesaver doing tesla chargers. Being able to use Tesla’s bit and have magnetic tip hold screw in place with out worry of screw dropping.
3.2 in. Stubby Multi-Bit Screwdriver with Square Recess Bit
Klein Tools Interchangeable Multi-Bit Screwdrivers/NutKlein Tools Interchangeable Multi-Bit Screwdrivers/Nut Drivers are heavy-duty tools designed for professionals. They are made of the highest-quality tempered steel with a torque-proof anchor in the handle. Strong, durable tips are manufactured with square edges to fit screw openings securely. They resist slippage and provide positive turning action. Stronger nut driver function improves bit-holding power, even with tough applications.View Full Product Description
6-in-1 Ratcheting Screwdriver
Magnetic bit holder for speedy and secureMagnetic bit holder for speedy and secure changeover of bits. Durable bi-material handles with comfort grip. Includes 6 Chrome Vanadium (CrV) bits with internal bit storage for easy access to bits - end cap carries 6 bits.View Full Product Description
14-in-1 Multi-Bit Adjustable Length Screwdriver
Klein Tools’ Adjustable Length ScrewdriversKlein Tools’ Adjustable Length Screwdrivers function both as multi-bit screwdrivers and impact driver attachments. With these screwdrivers, there is no need to run back to your tool bag. Industrial-strength bits are conveniently housed in the handle. Simply adjust the length of the blades to allow for easier access or remove to use with an impact driver. Powerful rare earth magnets secure bits and fasteners while the Cushion-Grip handle provides outstanding comfort and control.View Full Product Description
11-in-1 Magnetic Multi Bit Screwdriver / Nut Driver
The integrated screwdriver/nut driver shaftThe integrated screwdriver/nut driver shaft on the 11-in-1 Magnetic Screwdriver/Nut Driver holds 8 popular tips and converts to 3 nut driver sizes. The shaft contains powerful rare earth magnets for better fastener retention and is interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort. This versatile 11-in-1 multi-tool has everything the professional tradesperson needs to make the job a little easier.View Full Product Description