#1 Home Improvement Retailer

Internet #311250959

Model #VDV500-123

Store SKU #1004700266

Apply Now
Pay $15.99 $40.99 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Trace wire on inactive networks
  • Responsive, durable, non-metallic, conductive tip
  • Tip has a light for use in dark spaces
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

Product Overview

The professional series Probe-Pro Tone Tracer traces non-active wiring when used with Toner-Pro Tone Generator (sold separately). It features a responsive, durable, replaceable non-metallic, conductive tip and a work light for use in dark spaces. A headphone jack allows for headphone (not included) use in extreme noise environments. The terminal block confirms the toned pair has been located.

Additional Resources

From the Manufacturer

Compare Similar Pipe Locater Tools

250 ft. 14-Gauge Tracer Wire
current product
Probe-PRO Tracing Probe
M18 18-Volt Lithium-Ion Cordless Pipeline Inspection System Tablet Mount (Tool-Only)500 ft. 14-Gauge Tracer Wire
BrandHOME-FLEXKlein ToolsMilwaukeeHOME-FLEX
Name250 ft. 14-Gauge Tracer WireProbe-PRO Tracing ProbeM18 18-Volt Lithium-Ion Cordless Pipeline Inspection System Tablet Mount (Tool-Only)500 ft. 14-Gauge Tracer Wire
Price
$3792
Add to Cart to See Price
$4999
$7497
Ratings
(7)
(14)
(1935)
(5)
Power TypeManualBatteryBatteryManual
View ProductView ProductView ProductView Product

Specifications

Dimensions

Compatible Pipe Size (in.)No Compatible Pipe Size

Details

Pack Size1Power TypeBattery
Product Weight (lb.)0.35Returnable90-Day

Warranty / Certifications

Manufacturer WarrantyPlease refer to the attached warranty document in the Product Overview section above under Info & Guides

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 5
    out of 14 reviews
  • 100%recommend this product
Filter by:
Showing 1-10 of 14 reviews
The Klein Tools Probe-Pro Tone Tracer traces non-active wiring when you use it with the Klein Tool Toner-Pro Tone Generator. You will have to purchase that separately. It has a a 3.5 mm plug to plug in a headphone jack when you are in a noisy environment (not included). Some of the features is that it has a LED work light for dark area spaces, volume control to hear the tones. It automatically turns off 10 minutes of non-use. In also has a low battery indicator. The tip can be easily replaced if you happen to break it off. It comes with 4 AAA batteries. A great product from Klein.
by
  • Recommended
This Klein tracing tool got a really extensive testing over the last couple weekends as my business was in the process of moving into another building with literally hundreds of Cat 5 and 6 cables running all over the place. I only needed 32 and I was able to trace the cables I needed and only had to run one new one to reach from the modem to the router and switches. When you touch the probe to the wire you are tracing that has the tone generator on the other end, it is obvious when you have touched the same wire.
by
  • Recommended
Many times I have had problems with testing wiring and had to use more difficult ways to verify c...
Many times I have had problems with testing wiring and had to use more difficult ways to verify connections or continuity. This tracing probe makes life much easier. When used with Klien tools tone generator, I can easily test non energized twisted pairs, non paired wires and test circuit continuity. This probe comes with a non metallic replaceable tip, terminals to test paired wires and a light for working in poorly lit areas. Also has a headphone jack and volume control for working in noisy areas.
by
  • Recommended
I'm reviewing the tone generator and toner pro together, since one without the other is pretty us...
I'm reviewing the tone generator and toner pro together, since one without the other is pretty useless. This works well as a general wire tracer out to about 10-11" from the tip. The tip sensor is actually slightly more sensitive when pointed towards the wire as opposed to being parallel with it. You have to get under 4" before the Strength LED begins to light up. If you are tracing one wire pair in a bundle, then as long as the pairs are separated by 1-2", the difference between the one you are tracing and all the others is very easy to detect, both with the tone and the LED. The tone generator has a safety mode where it will detect a shorted line automatically, and 3 different frequencies of tone are available to suit the user's preferences.
by
  • Recommended
Hey…. It’s a Klein tool…. Wish I had the toner,...
Hey…. It’s a Klein tool…. Wish I had the toner, too!
by
  • Verified Purchase
Works perfectly. Worth every penny to upgrade from my previous...
Works perfectly. Worth every penny to upgrade from my previous one.
by
  • Verified Purchase
by
    Yes but I also have one that just quit working...
    Yes but I also have one that just quit working and need to send it back . Can you give me the details on how to do that ?
    by
    • Verified Purchase
    Great too for finding your lines really quickly and easily...
    Great too for finding your lines really quickly and easily
    by
    • Verified Purchase
    Does real well. I like that you can use ear buds with it as well. Kind of essential for tracking ...
    Does real well. I like that you can use ear buds with it as well. Kind of essential for tracking wires..
    by
    • DIY
    • Verified Purchase
    • Recommended
    Showing 1-10 of 14 reviews