
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Klein Tools' Reversible Impact-Driver Set is a rugged, hand-impact driver designed to turn rusted, frozen, or other stubborn screws. The internal, spring-loaded, helical design transforms the impact of a hammer blow up to 200 ft. - lbs. of shock torque. It can also be used with 3/8-Inch square-drive impact sockets.
Dimensions: H 2.50 in, W 4.30 in, D 10.60 in
Product Depth (in.) | 10.60 in |
|---|---|
Product Height (in.) | 2.50 in |
Product Width (in.) | 4.30 in |
Hand Tool Type | Multibit Screwdriver |
|---|---|
Pack Size | 1 |
Returnable | 90-Day |
Manufacturer Warranty | Please refer to the attached warranty document in the Product Overview section above under Info & Guides |
|---|
Klein Tools' Reversible Impact-Driver Set is a rugged, hand-impact driver designed to turn rusted, frozen, or other stubborn screws. The internal, spring-loaded, helical design transforms the impact of a hammer blow up to 200 ft. - lbs. of shock torque. It can also be used with 3/8-Inch square-drive impact sockets.
It includes a reclosable, seal-tight vinyl pouch with hang-up grommet
Set it to the direction you want it to turn, hold firmly then hit it firmly.
Yes you need to twist/pressure and hit it with a hammer.
No, you do not have to twist/pressure in the direction you want as you hit it with a hammer. Set the direction you wish to drive the screw by pushing in the bit and twisting, then place the driver on the stubborn screw and hit the back end with a hammer.
Not once the direction is set. I usually lightly tap it on a flat surface to make sure it is going the right way before using it.
No. You set the tool before you hit it.
If anyone encounters this same problem and can get a hold of a square head bit that will fit into the impact driver. It should do the job.
It will probably twist the heads off if their in that tight.
Klein Tools' Reversible Impact-Driver Set is a rugged, hand-impact driver designed to turn rusted, frozen, or other stubborn screws. The internal, spring-loaded, helical design transforms the impact of a hammer blow up to 200 ft. - lbs. of shock torque.
I believe it will, if you have a square drive, it doesn't come with one, we tried taking a screw out of wood to see which direction it was set at, it backed it right out. Good Luck if you purchase this, it worked nicely on 6 out of 10 screws in a metal door. The rest were too rusted and cammed out.
The Reversible Impact-Driver Set is a 3/8" Square Drive.
No it's 3/8"
3/8" drive BUT inserts are 5/16"
Viewing 1-5 of 5
4.5 out of 5