#1 Home Improvement Retailer

Internet #204615904

Model #PRS2100

Store SKU #1000697342

Precision Bench Top Router Table

  • Durable construction for lasting use
  • Vibration-dampening rubber feet and noise-absorbing MDF top
  • Impact-resistant easy-slide Microdot skin
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Kregs Precision Bench Top Router Table offers versatility whether you want a router table for the job site or compact router table for the shop. This table is durable to withstand years of use and abuse, and features an impact-resistant Microdot surface and rigid aluminum fence. It also has a rugged stamped-steel foundation and 4 hard-wearing rubber feet. The noise-absorbing MDF tabletop with rigid steel base and vibration-dampening rubber feet makes this router table incredibly quiet for less distractions.
  • Rugged steel stand with vibration-dampening rubber feet
  • Professionally edge banded reinforced MDF top (16 in. x 24 in.)
  • Tabletop height of 16 in.
  • Impact-resistant easy-slide Micro-Dot skin
  • Full-size router inserts plate (9-1/4 in. x 11-3/4 in. x 3/8 in.) with 3 level-loc reducing rings
  • Unique bottom-up levelers with 8 individual contact points for leveling accuracy
  • Independent fence faces that allow the table to double as a vertical jointer
  • Vacuum shroud for a clean workplace
  • California residents

Specifications

Dimensions

Product Height (in.)
4.75
Product Length (in.)
19.25 in
Product Width (in.)
30

Details

Material
Medium Density Fiberboard (MDF)
Power Tool Accessory Type
Router Table
Returnable
90-Day
Router Part/Accessory Type
Router Table
Tools Product Type
Power Tool

Questions & Answers

37Questions12Answers

Will milwaukee cordless router fits on this router table?

Asked by Ricko February 27, 2021
1
Answer

Thank you for the inquiry. The Router Tables are designed to accept full size routers. The trim or smaller routers will not fit.

Is this table compatiable with the Dewalt 20v DCW600 router?

Asked by DK February 26, 2021
1
Answer

The Kreg Precision Benchtop Router Table is designed to work with full size routers with at least 2 1/4 HP.

Will The DeWalt 618 Router fit this router table?

Asked by Theresa January 31, 2021
1
Answer

The DeWalt 618 will work with the Kreg Bench Top Router Table.

is this the new model?

Asked by DREW January 25, 2021
1
Answer

The Kreg PRS2100 would be the newest model of the Kreg Precision Benchtop Router Table.

Is this the new redesigned model now, and just an old picture? I saw on Woodcraft's website that ...

Asked by MCM January 23, 2021
1
Answer

Thanks for the question. If you order the Kreg Benchtop Router Table System you will receive the newer version of the system. It appears that the incorrect pictures are being used on the page which we will have updated.

Will this router table work for the Dewalt DCW600?

Asked by Jake January 19, 2021
1
Answer

I am sorry to say the Kreg Bench Top Router Table will not work with the Dewalt DCW600. The Kreg Systems are designed to work with full size routers with at least 2 1/4 HP.

What are the assembled dimensions of this table?

Asked by JBM November 17, 2020
2
Answers

Thanks for the response. The top of the Kreg PRS2100 will be 16" x 24" and it will stand 15 3/4" high.

Will a Dewalt dcw600b Work with this

Asked by Bob October 9, 2020
1
Answer

Thanks for the question. The Kreg Bench Top Router Table is designed to work with full size routers with at least 2 1/4 HP. Unfortunately, it will not work with the Dewalt dcw600b.

Will a different brand lift fit the table?

Asked by Paul August 25, 2020
2
Answers

Thank you for your inquiry. A different brand will work as long as the plate of that lift is 9-1/4" x 11-3/4".

will my Ridgid R2901(full size) Router fit the PRS2100

Asked by JEFF July 10, 2020
1
Answer

Thanks for the questions. The Kreg Bench Top Router Table is designed to work with all full size routers with at least 2 1/4 HP.

Precision Bench Top Router Table - page 2

Customer Reviews

  • 4.5
    out of 42 reviews
  • 96% recommend this product
Filter by:
Showing 1-10 of 42 reviews
so far so good!
Great entry level table. And awesome in my small shop. Building a small cabinet or box @20 inch height will put this table at 36 inches.. the perfect working height. Get the switch and feather boards and youre ready to rock. I mounted a porta cable router underneath. Took about an hour to assemble and drill the holes in the baseplate.
by HomeDepotCustomer
1 person found this helpful
Unable to assemble
Unable to give a proper review with this product because i am unable to put it together. One of the short rails came cut or machines incorrectly preventing me from assembling the stand. The sides of the rails should be cut at an angle rather than squared off at 90 degrees. Also the drill holes on the right side are backwards. I have called and emailed customer service and still have not heard back. Will change rating upon resolution
by James
1 person found this helpful
Great table poor quality control
The table itself is great and assembly was simple. Kreg needs to work on quality control though my kit was missing the table levelers and included the wrong mounting screws. I had to contact kreg directly to get the levelers and I didn’t realize I had the wrong screws unitil the first one went through the top of the table. Luckily it was on the back side of the table but this was still very frustrating. I just ended up using some shorter screws that I had in my shop.
by cole893
great table
The table was easy to assemble and has worked well with all my projects. It has done everything it was advertised to do.
by Woodworker4
22 people found this helpful
Very solid, well-built table. I have not used it extensively yet but assembly was easy and well ...
Very solid, well-built table. I have not used it extensively yet but assembly was easy and well laid out.
by Tom
Well worth it!
Yet again another fantastic product from KREG! I’ve worked on many tabletop routing tables and some costing much more than this. The thing that sets this one apart from the others is that it is very stable and doesn’t wobble at all. It is very apparent that they didn’t make this with the cheapest materials they could find (like many manufacturers do). Every piece feels solid and when assembling them they all fit snug as a bug with no alignment issues. I usually don’t leave reviews but I felt inclined to do so when I read the other ones that are so jaded and misleading. Most of the negative reviews talk about how they were missing a part or multiple parts and how they “couldn’t find” any replacement parts... I too was missing a couple parts and was slightly frustrated and thought that it might be difficult to get from any company not just KREG. But I did and do trust a company of prestige and high craftsmanship like KREG to stand by their product. And they did! It took less than a couple minutes on the phone and no muss, no fuss, they were shipped! I didn’t get interrogated or hassled. Just taken care of in the professional manner which anyone would hope for from any customer service department. BRAVO KREG! Bravo on your customer service department and as always, bravo on your high standards of craftsmanship in designing and making your products! I use to just have a couple KREG products for special purposes. Now I’m going to look into expanding my workshop with many more of their “everyday” tools and accessories because I know for sure that they will stand by their products and not hassle me!
by Mitch V.
Very easy setup! Directions were clear and easy to follow....
Very easy setup! Directions were clear and easy to follow. I’ve used the table a couple of times and it is sturdy and a pleasure to use. I’m looking forward to learning of the different ways to utilize the table. I’m very happy with the purchase a good value!
by MICHAEL
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Worked very well for everything I used it for except as a jointer
Worked very well for everything I used it for except as a jointer
by Dbug
Great table for a small area
I ordered this so that I could do a better job in the limited space I have in my garage. I arrived and I started to put it together per the instructions (I rarely do this part). The directions were spot on. It told you every step to do and what in what order. One hour later I was looking at a finished table. I wanted the pre-drilled plate but it was out of stock, so I gritted my teeth and drilled the blank on. Very easy to do, just wear a mask, the fumes of drilling are strong. Routed my first piece this morning and I could not be happier. This table and my Bosch 1617EVS are a great combination.
by DGuy
Showing 1-10 of 42 reviews