A: No, the starter box is not deep enough for the Lutron dimmer CTCL-153P.
A: Yes, and why not, but it wouldn’t look good, better off elem I ate, unless the wire or cable not long enough to breaker box , if that the case, you have no choice and yo use it as junction box
A: The this box adds approximately 12 cubic inches of volume. It measures 4-5/8 x 2-7/8 x 15/16. Home this helps!
A: If you are using this as a starter box and attaching to an existing electrical box, then yes, this will fit a GFCI.
A: GFCI outlets require a Deep Box. https://www.homedepot.com/p/Legrand-500-and-700-Series-Metal-Surface-Raceway-Deep-Single-Gang-Electrical-Box-Ivory-V5744S/100134540 A few caveats: If there is an existing box with space in it and you are using the starter box to start a circuit extension, like to another outlet on the wall, which would be a GFCI protected outlet off the GFCI, then the starter box might work, depending too on the dimensions of your selected GFCI outlet.
|Name||Wiremold 700 Series Metal Surface Raceway Starter Electrical Box, White||Wiremold 700 Series Metal Surface Raceway Single Pole Switch Kit, White||Wiremold Non-Metallic PVC Raceway 5 ft. Wire Channel, White||Wiremold 500 Series 10 ft. Metal Surface Raceway Channel in Ivory|
|Features||Paintable/Stainable||No Additional Features||Paintable/Stainable||Paintable/Stainable|
|View Product||View Product||View Product||View Product|