Small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.
A:Â Hello,
This raceway is approved for THHN / THWN type wiring.
NMW17 can be used on the end of the raceway at which point the outer jacket of the romex cable should be stripped and a romex connector should be used to properly secure the romex to the NMW17 end feed.
This raceway can accept up to 5 12AWG electrical wires.
Thank you!
by|Aug 18, 2023
Q:Are elbows included in the package
by|Jun 28, 2023
1 Answer
Answer This Question
A:Â No they are not. Elbows are sold separately.Â
by|Jun 29, 2023
Q:There is mention of temperatures being too cold or hot causing the wire mold to become brittle. What are the limits of temperature that can cause this? I ask for installation in a garage where it is technically indoors but unconditioned. Thanks!
by|Apr 30, 2023
1 Answer
Answer This Question
A:Â Hello Chris,
All of our non-Metallic raceway have been tested and can be used for temperatures of 0° - 65° Celsius (32° - 149° Fahrenheit).
Thank you -
by|May 1, 2023
Q:can you run 120 volt wire through it?
by|Dec 21, 2022
1 Answer
Answer This Question
A:Â Hello,
Yes, the NMW1 is power rated for up to (5) 12 gauge wires.
Thank you
by|May 15, 2023
1 found this answer helpful
Showing 1-4 of 71
Customer Reviews
4.5 out of 5
(411)
4.5
out of 411 reviews
86% recommend this product
5
284
4
70
3
25
2
18
1
14
Filter by:
Showing 1-10 of 411 reviews
Apr 5, 2023
Used as shoe molding
Needed to hide wires along base molding, so I removed shoe molding then ran wires in this sleeve as shoe molding, a little silicone to hold it in place to base molding and looks great.
by
Verified Purchase
Recommended
Apr 5, 2022
Legrand to the rescue. It worked out great.
The Legrand Wiremold worked out great for me. I mounted our TV on the wall and had to hide the cables. Legrand to the rescue. It worked out great.
by
Verified Purchase
Recommended
1 found this review helpful
Mar 22, 2022
Makers corner
Used to create a more finished look on the curtain rod installation.
by
Verified Purchase
Recommended
2 found this review helpful
Sep 21, 2021
...
by
Jan 30, 2021
Exactly what I was looking for!
This product was exactly what I was looking for to hide my wires from my tv to the outlet! The only thing was in other comments it says it’s adhesive- mine was NOT. I had to use double sided tape to get it to stick to my wall.
by
Recommended
1 found this review helpful
Dec 12, 2020
I plan on using these to route some low voltage...
I plan on using these to route some low voltage landscape lighting wiring in several places around the outside of my house. The power supply, photo eye, and switches will be in the house attic, protecting them from the elements. The wiring will be routed from the attic through a rectangular cut-out in the brick molding/soffit which the wiremold product will mate with, and conceal the wiring as it goes down the side of the house to the ground. The wiremold will be placed behind the gutter downspout and painted to match the brick work (not yet painted in photo) so it won't be readily visible. I will probably supplement the self-adhesive of the wiremold with a mastic to help it adhere to the brick. The low profile of the LeGrand "on wall" wiremold will allow it to tuck neatly behind the downspout and cover several pairs of wires. The plastic composition of the wiremold will protect it from the weather.
The length of the wiremold channel can be extended by placing additional base pieces end-to-end, then "stagger" the top covers when applying so they overlap the bases by about 3-4 inches to hold the completed length together. Trim as necessary with a fine saw before inserting the wires/cables.
by
Verified Purchase
2 found this review helpful
Nov 12, 2020
A bit hard to install but do the job
A bit hard to install but do the job
by
Verified Purchase
1 found this review helpful
Jul 21, 2020
It worked out very well. The system fits together well. You need more anchors than the accessor...
It worked out very well. The system fits together well. You need more anchors than the accessory kit provides so if you are using this pick up some addition plugs and screws. The corners and such are a touch expensive but overall happy with my project.
by
Verified Purchase
Recommended
1 found this review helpful
Aug 22, 2019
Basically purchased the double box flush mounted to wall to run WiFi to ceiling grid. Only used o...
Basically purchased the double box flush mounted to wall to run WiFi to ceiling grid. Only used one foot and the job looked professional
by
Verified Purchase
Recommended
Jul 2, 2019
Would be nice if it had a stick on side.
Would be nice if it had a stick on side.
by
Response from LegrandSupportJul 8, 2019
For a self adhesive option, we recommend our CordMate line of products. Hope this helps! https://www.homedepot.com/p/CordMate-III-High-Capacity-Channel-C35/300185545
Small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.
Small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.
The Legrand Wiremold 700 series raceway is ideal for surface mounting small amounts of electrical wiring or communication cables. Surface metal raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. It is also ideal for adding wire when you can't go into the wall, such as on concrete foundations or brick walls. Combine with other 700 series connectors, fittings and channel to ensure you have the right customization for every project.
Small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.