#1 Home Improvement Retailer

Internet #204806458

Model #CMR 9

Contractor Select CMR Series 360° Small Motion Standard Range Ceiling Mount Occupancy Sensor

  • Adjustable push-button programmable time delay; 30 sec to 20 min
  • Self-contained relay, no power pack needed
  • No minimum load requirements
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Maximize your energy-savings while reducing maintenance costs when you automate the ON/OFF switching of your light fixtures. The Sensor Switch 360° Ceiling-Mount Occupancy and Motion Sensor incorporate Passive Infrared (PIR) technology into an attractive, economical and programmable sensor that does just that. When mounted at 9 ft., the sensor views up to 12 ft. in all directions. Its circular coverage pattern is ideal for small rooms with drop ceilings and areas without obstructions.
  • Save money by consuming less energy and reducing maintenance costs
  • Program the time the lights remain on from 30 seconds to 20 minutes (factory set at 10 minutes)
  • Small, unobtrusive design attaches discretely to a ceiling tile surface, 3.5 in. octagon J-box or single gang handy box
  • LampMaximizer technology preserves bulb life while maximizing energy savings (bulbs sold separately)
  • Maximum load at 120 VAC is 800-Watt and at 277 VAC is 1200-Watt
  • Optimum mounting height 7 to 15 ft.
  • No field calibration or sensitivity adjustments required
  • Includes a test mode and a green LED indicator light
  • cUL listed to US and Canadian safety standards

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Motion Sensors

360° Mounted White Motion Sensor Fixture
current product
Contractor Select CMR Series 360° Small Motion Standard Range Ceiling Mount Occupancy Sensor
Contractor Select CMR Series 360° Small Motion Dual Technology Standard Range Ceiling Mount Occupancy SensorContractor Select CMR Series 360° Large Motion Extended Range Ceiling Mount Occupancy Sensor
BrandLithonia LightingLithonia LightingLithonia LightingLithonia Lighting
Name360° Mounted White Motion Sensor FixtureContractor Select CMR Series 360° Small Motion Standard Range Ceiling Mount Occupancy SensorContractor Select CMR Series 360° Small Motion Dual Technology Standard Range Ceiling Mount Occupancy SensorContractor Select CMR Series 360° Large Motion Extended Range Ceiling Mount Occupancy Sensor
Price
Ratings
(83)
(34)
(3)
(2)
Electrical FeaturesIlluminatedIlluminatedIlluminatedProgrammable
Wattage (watts)800800800800
Mounting TypeFixture MountedCeiling MountedCeiling MountedCeiling Mounted
Indoor/OutdoorIndoorIndoorIndoorIndoor
Motion Sense TypeOccupancyOccupancyOccupancyOccupancy
Field of View360 Degrees360 Degrees360 Degrees360 Degrees
Voltage120 volt,277 volt120 volt120 volt120 volt
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
1.55
Product Height (in.)
4.55
Product Width (in.)
4.55

Details

Amperage (amps)
5
Color Family
White
Color/Finish
white
Commercial/Residential
Commercial
Compatible Bulb Type
CFL,Incandescent
Coverage Area (sq. ft.)
12
Electrical Features
Illuminated
Electrical Product Type
Motion Sensor
Field of View
360 Degrees
Indoor/Outdoor
Indoor
Maximum Distance (ft.)
12
Motion Sense Type
Occupancy
Mounting Type
Ceiling Mounted
Pack Size
1
Rating
General Purpose
Returnable
90-Day
Voltage
120 volt
Wall Plate Included
No
Wattage (watts)
800

Warranty / Certifications

Certifications and Listings
cUL Listed
Manufacturer Warranty
5 years

Questions & Answers

27Questions19Answers

Can this be install in a house staircase, 3 way?

Asked by Bert October 10, 2020
1
Answer

Yes, I installed mine about 6 years ago, it was pretty simple and was completed less than 30 min. Just follow the wiring diagram or have someone who knows how to wire a three way switch help you.

How much motion is require

Asked by PWSofWPA September 7, 2019
2
Answers

It doesn't pick up small motions for me. I've had it shut off while standing at laundry sink, then I need to wave my arm to get light to come back on.

I'm planning to install this in my garage. Will the garage opener block it's ability to sense when there's someone on

Asked by Moe January 20, 2019
2
Answers

The garage opener will create a blind spot, but assuming the sensor is not too close to the sensor you should be ok. I installed sensors in the actual fixture and the motion sensing works very well.

Does it turn off the light when there's already a light or daylight?

Asked by Moe January 4, 2019
3
Answers

The Ceiling Mount 360 will activate whenever a person or pet comes within range. Ambient lighting has no effect on whether this motion detector functions (activates lights) or not.

Can it be install on exhaust fan to turn on and off as you go in and out of bathroom.

Asked by Jesse December 5, 2018
2
Answers

I no longer have my original packaging to look for the max current draw that this sensor is rated at. Check the websight for this info! The main concern I would have is the amount of current your exhaust fan would draw and if the sensor could handle the initial current surge (which would be much higher) upon fan start up! This does not give you a difinitive YES or NO ANSWERE, but I hope it gives you some pointers about items to investigate! Good luck!!

Can it be install on exhaust fan

Asked by Jesse December 5, 2018
2
Answers

I don't see why not--you just don't use the program functions for dimming.

Will this item work if there is a dimmer upstream governing the power supply? My theoretical setu...

Asked by Poland September 24, 2018
3
Answers

I would say you deffinatly do not want to supply power to the motion sensor through a dimmer switch! You would likely fry the sensor! You can tap into the power source before the dimmer and supply your new infrared unit to your lighting. If you are wanting to use both the dimmer and sensor on the same light, I would just get rid of the dimmer all together and possibly use smaller wattage bulb/s.

how do I program the sensor

Asked by john June 3, 2018
2
Answers

The instructions are on the inside of the cover. To remove the cover, twist it off counterclockwise.

can this switch be use on the ceiling above a shower ? ( is it waterproof )

Asked by patty May 23, 2018
1
Answer

No it is not rated for wet areas, do not use inside a shower stall , can be used in other areas just outside. Of the shower area.

I have a 28 foot hallway with a ceiling mounted light fixture on a 3-way switch. Will one motion...

Asked by KB November 27, 2017
1
Answer

Yes it will work with a 3 way switch

Contractor Select CMR Series 360° Small Motion Standard Range Ceiling Mount Occupancy Sensor - page 2

Customer Reviews

  • 4.1
    out of 34 reviews
  • 78% recommend this product
Filter by:
Showing 1-10 of 34 reviews
Worked exactly as advertised in terms of range amd sensitivity. Bought two and wired in parallel ...
Worked exactly as advertised in terms of range amd sensitivity. Bought two and wired in parallel per the instructions for control of 4 100w equivalent led bulbs in an attic. Programming is very easy and straightforward per the instructions. Only reason I did not give 5 stars is that they do not fit a 3.5 inch octagon box as stated in the instructions. So I am stuck with 2 of these oddball boxes that I bought online elsewhere. The sensors I received fit a 4 inch round ceiling box perfectly. See the photo.
by SetterMan
1 person found this helpful
This motion sensor worked exactly as expected and I would recommend it highly.
This motion sensor worked exactly as expected and I would recommend it highly.
by mickiej
It was easy to install and it's great for my...
It was easy to install and it's great for my building.
by Tony
by RALPH
It works so much better than the light switch incorporated...
It works so much better than the light switch incorporated motion switches. And has a greater range of detection.
by CHARLIE
Response from Director-SalesJan 12, 2021
Thank you for this feedback. We are glad to hear of your satisfaction with this upgraded motion sensor. AcuityBrandsLighting
Faulty sensors
Bought two of the dual mode sensors and one just PIR sensor. The PIR sensor didn't work. The lights turned on once stayed on for ten minutes like it said it would, then went off and wouldn't come back on. Their tech support was nice and we troubleshot for a while. They said it was a bad sensor and to return it. So, I swapped in the dual mode sensor. Same spot same wiring. The lights came on but wouldn't go off. Even after setting the occupancy time delay to 30sec, turning off the sonic sensor and setting min operation time to 0. I left the room, came back 20 min later and still on. I'm returning these. I'll try the Leviton ones, I guess you get what you pay for.
by Bob
Followed instructions, turned off the power. Installed the new replacement....
Followed instructions, turned off the power. Installed the new replacement. The unit works perfectly. Have the unit for more than a month. I am happy with the results
by Nick
It's a good motion sensor. I'm pleased with it. I installed it in my garage. No more walking into...
It's a good motion sensor. I'm pleased with it. I installed it in my garage. No more walking into a dark garage when coming from work at night! I set it to 2.5 minute delay. The instructions are bit confusing. It had a 10 minute delay by default, meaning, once it's turned on, it will have to complete 10 minutes before getting turned on again. I turned this feature off. It took me a while to figure this out because of confusing instructions.
by Moe
Really pleased with product
Really pleased with product
by Dennis
skeptical after reading some of the reviews... But the...
skeptical after reading some of the reviews... But the unit works just fine as described no false triggers no issues!
by HomeDepotCustomer
Showing 1-10 of 34 reviews