#1 Home Improvement Retailer

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

Specifications

Questions & Answers

Can you stucco over it
ByNov 14, 2026
1 Answer | 
Answer This Question

Hello Edward, yes, stucco is compatible with Foamular products. When using stucco, a drainage layer should be applied in between the XPS and the metal lath/stucco.  The stucco system should not be applied directly to Foamular XPS board. We would recommend that the installer refer to the stucco manufacturer when it comes to the application of stucco. Thank you for your inquiry.

By|Nov 16, 2026


    Use under inflatable hot tub?
    ByNov 2, 2026
    1 Answer | 
    Answer This Question

    Hello Joseph, Owens Corning does not have recommendations on the use of Foamular as insulation for a hot tub. Thank you for your inquiry.

    By|Nov 6, 2026


      Can I use this as rim joist insulation
      ByOct 30, 2026
      1 Answer | 
      Answer This Question

      Hello Kristian, Please contact an insulation agent at 1-800-GETPINK (438-7465) anytime Monday-Friday 8am-6pm to discuss your application and potential products. Thank you for your inquiry.

      By|Nov 3, 2026


        is NGX FIRE PROOF
        ByOct 24, 2026
        1 Answer | 
        Answer This Question

        Hello Jenny, All Foamular NGX is combustible and requires a protective barrier or thermal barrier as specified in the local building code. Thank you for the inquiry.

        By|Oct 28, 2026


          Can we install inside of the house to?.
          ByOct 21, 2026
          1 Answer | 
          Answer This Question

          Hello Fernado, Foamular 150 rigid insulation board is standard for the below applicaitons: Wall Furring Foundation Wall Cavity Wall Exterior Sheathing All Foamular is combustible and requires a protective barrier or thermal barrier as specified by your Local Building Code. Install Instructions for interior installation can be found at the "Installation Instructions" drop down: https://www.owenscorning.com/en-us/insulation/products/foamular-150#technical-information Thank you for your inquiry.

          By|Oct 23, 2026


            can this product be applied top a concrete garage ceiling
            ByOct 5, 2026
            1 Answer | 
            Answer This Question

            Hello Gary, Please contact the Owens Corning insulation agents at 1-800-GETPINK (438-7465) anytime Monday-Friday 8am-6pm EST to discuss your potential application. Thank you for your inquiry.

            By|Oct 7, 2026


              Can I use this product in my basement concrete wall
              ByOct 3, 2026
              1 Answer | 
              Answer This Question

              Hello Eugene, Please review your Local Building Codes however the Foamular 150 product is commonly installed on basement walls. Please explore the installation instructions in the "Installation Instructions tab" https://www.owenscorning.com/en-us/insulation/products/foamular-150 All Foamular is combustible and requires a code compliant 15 min barrier. Thank you for your inquiry.

              By|Oct 5, 2026


                Can I use this foam to air seal the rim joists in basement? Like this: Cover the entire wood face with at least 2 inches of rigid foam board, then spray-foam around the edges of the board, and then add mineral wool.
                ByOct 1, 2026
                1 Answer | 
                Answer This Question

                Hello Bubacu, We cannot make a recommendation on that application as the Foamular NGX must be covered or separated from living space by a thermal barrier (1/2” gypsum or equivalent). Thank you for your inquiry!

                By|Oct 1, 2026


                  Viewing 1-8 of 547

                  Customer Reviews

                  4.7 out of 5

                  Filter by:
                  Showing 1-10 of 776 reviews
                  Ordered Foamular NGX F-250 to insulate my slab for in floor heating of my new pole barn. Product was delivered on time and placed into the barn.
                  by
                  Simply the best Hard Poly foam on the market. Cuts easily and also has pre sliced lines @ six inch intervals. Easy snap leaving factory edges.
                  by
                  • Verified Purchase
                  I used this to build an air-tight cover for my attic pull-down ladder. I built a light wood frame and used the 2 inch foam board as the walls. It worked fine and I am happy with the result but was honestly shocked at the price for a simple piece of foam. It must be all in the shipping.
                  by
                  1 found this review helpful
                  Used this rigid foam insulation to winterize a prebuilt shed that houses a well water supply system. Perfect application for this product as it provides lots of R value in a not too bulky form factor. In particular insulation underneath the building would have been difficult and expensive any other way. This just slides right under!
                  by
                  1 found this review helpful
                  I insulated my garage door. Could not get the 1.5” in 4x8 size without buying a pallet. Had to piece together but worked great. Used the spray foam behind each verticle panel support…new door was 3k…this only cost 400 bucks!
                  by
                  • Verified Purchase
                  1 found this review helpful
                  This customer chose to rate the product and not provide text.
                  by
                  This customer chose to rate the product and not provide text.
                  by
                  • Verified Purchase
                  This customer chose to rate the product and not provide text.
                  by
                  • Verified Purchase
                  This product is great for rigid insulation required applications and is fairly easy to cut. I used a skill saw with a fine tooth blade... the only down fall cutting with this tool is that its messy ...outdoors is best
                  by
                  One piece upon delivery was broken but other than that great product and would buy again
                  by
                  Showing 1-10 of 776 reviews