18-Volt LED Work Light (Tool-Only)

Yes, pull the trigger to turn it on or off. No need to hold it down.

Yes

Yes

Yes.

Yes, the trigger is a on / off switch. Click once to turn it on, click again to turn it off...

Hi Jeffthetoolguy, The light stays on after you squeeze the trigger and turns of if you squeeze again. Thanks for asking. Greg

it "clicks" on and you must press it a second time to turn it off

Yes it is a click on, click off. you can also feather the trigger to get it to come on without locking on.

Yes. Press it once it comes on. Press it again and it turns off.

It is a latching button. Click once to turn on, click again to turn off.

White

LED bulb. So white

It's a white bulb.

White LED

Well the led module is yellowish like most, but the light output is white.

Hi Ojh, The light is white. Thanks for asking. Greg

White in the 4500-5500k color range.

A white light but the light that is pictured with a belt clip and it does not come with one and the first one I bought did the last two I purchased didn’t have one and to get one for it you have to special order one

This light produces a white light...

white

I have had no problems, I own 36 RIDGID tools, 34 have the LSA

Hi RingtownJoe, Sorry you have been having an issue. If you were not given a reason for the issue you may want to call again and ask what you can do to prevent this in the future. Sorry again you have had an issue. Greg

I had a few problems, but I called the 800 number and they took care of everything.

their online process usually works for me, sometimes they cant cross reference my receipt, so there is an option on the rigid website to reply to the issue it says send in paperwork but also has option to upload a file, which i send the scan of the receipt, that always works, i never have to send in a receipt. at first i was not typing the entire serial number, bur even after i figured that out, i still sometimes have issues. all issues have been worked out. even tho u have to jump thru some hoops, its worth it. also, whenever they replace a tool or battery under LSA, it is up to YOU to call the 800 number and tell them the tool was replaced and provide them the new tools serial number. Ive had Ridgid lifetime tools for 15 years.

Yes Sir, you are correct. They make it such a pain in the butt to register anything. I've had to do the same thing as you. Whole lot of time spent. I think they try to discourage people so they dont have to warranty there tools. I'm getting away from Ridgid for this reason. Going back to Makita, Milwaukee, etc.

Reply to Ridgid Power Tool Team member.....every tool I have tried to register in the last year FAILED the first time. Yes, you have the option to resubmit the receipt and make follow up calls to Ridgid customer service. Which I have done on all these ocassions. My questions to Ridgid are these....Why don't you fix the process so it works the first time? Why is my time of no value that this seems to be acceptable to Ridgid? And after registering 21 Ridgid tools/kits (well over half of them failed the first time) doesn't Ridgid value me as a customer and look into what is broken with the inability of Ridgid to cross reference the receipts and, again, fix what is broken with this process? If you add all of my time with the failed LSA registration and the time wasted (to collect and send an ecopy of the receipts and making follow up phone calls (include being on hold), I have wasted hours of my time! Is this an acceptable way to treat someone who has 21 registered products?

I am totally satisfied with this flashlight

mine quit working after about a week. love my light cannon but please do not shine it into someone's eyes unless you plan to blind them for a while

Very easy to use with enough head adjustment to work well in most situations, excellent battery life with any of their batteries.

Hi David, Thanks for the kind words we like the flashlight also. Thanks again. Greg

There is no question for me to answer, however, I do agree with the purchaser who stated "OK flashlight, incredible power from any of the ridgid battery sizes that fit it. Can go for days without recharging. Has only one mode of operation which makes it easy to use". I personally purchased for 4 reasons: (1) LIFETIME SERVICE AGREEMENT if you successfully register the product - good luck! (2) MY EXISTING RIDGID BATTERIES FIT (3) AFFORDABLE PRICE approximately $20 spent (4) ONLY 1 MODE OF OPERATION WHICH EQUALS SIMPLICITY OF USE multi-mode flashlights make me unhappy...I only want "on" & "off", therefore I am very happy with this Ridgid flashlight.

I have the LSA on the 2 I own

Yes it does. The registration paperwork is in the package.

Hi David, This flash light will have the LSA if registered within 90 days of purchase. Thanks for asking. Greg

Yes, as long as you register it within the allotted time frame

It does but good luck with the registration process. I have had EVERY Ridgid tool I purchased in the last year fail thd first time! Then you have to submit a copy of your receipt and wait up to 8 weeks (so you cannot return it) if it fails! I have 21 Ridgid tools/combos and over half of them FAILED making me jump through hoops of resubmitting and calling customer service. Ridgid this is unacceptable! I have submitted my receipt for this light 4 times and still no registration. The process is broken and they will not fix it. If someone from Ridgid posts this as an exaggeration, my next post will have every email of the failures and log of calls to Ridgid customer service as I put them all in a folder called "Why do i bother, but another brand"! By the way, I work as an industrial mechanic for a fortune 100 company and do tool reviews. Every Ridgid tool I review has this issue listed. So I do keep EVERY communication from Ridgid to back up my issues with the LSA registration!

Yes.

I believe it does, provided you follow the intricate steps to register, and ensure that the Ridgid team does their job.

IN GENERAL, only BATTERIES are NOT covered by the LSA if purchased separately from a kit. Most all bare tools (-B designation) can be registered (within 90 days, with receipt) for LSA confirmation. Some select vacuums are not bare tool covered and as such only have the 3 yr RYOBI warrantee from RIDGID/TTI.

I WAS able to register mine for the lifetime service agreement. Make sure you retain your receipts.

Hi John, This is an LED light and is not replaceable. It is rare to have any issues with the light so there is no need to have to replace it. Thanks for asking. Greg

I assume that you have the service manual, first I would look in the supplied manual with the light- If you can't find the section on "R&R light Bulb", call the nearest RIDGID service cerner- I have never had ANY problem w/ any RIDGID tool, but things happen- Good Luck

By twisting the front cover

This is LED, so it's not really a bulb. It comes with lifetime warranty if the LED burns out.

bulb is not replaceable. this is an led light. Contact ridgid for more information. they have an 800 number and they do answer the line.

The head rotates around where you can point the light beam up or down or to the sides.

This is a "RIDGID- ridgid" light, no movement or adjustment in the angle of the light

Hi Juan, The light front rotates to point in different directions. Hope this helps, Greg

It twist in several direction. Up, down and side ways.

Yes it does twist which makes it very versatile when you can't hold the light

Batteries Plus has them...

No bulbs are needed. It's got a LED mounted in it.

It would be easier to get a new one if you have the lifetime warranty

If you filed for the LSA, or have a 3 year service agreement, get hold of the "RIGID repair " shop in your area, you will need to pay shipping

Hi JD, This is an LED flashlight, there is not a bulb to replace. If there is an issue you will need to call Ridgid customer service. Thanks for asking. Greg