The RIDGID Multi Material Wheel Kit (6-Piece) provides a variety of blade types, perfect for all users. The same great blades packed inside of our R87547B RIDGID Brushless 3 in. Multi-Material Saw is now available as replacement blades. The additional flange washers ensure proper blade fit. For best results, always pair your RIDGID tools with the RIDGID accessories. These wheels are designed to cut through metal, tile, drywall, & plastics. This package contains three metal cutting wheels, one tile cutting wheel, two carbide cutting wheels, a 7/16 in. flange adaptor, and a 3/8 in. flange adaptor.
Metal blade materials: steel, aluminum, diamond plate and copper
Tile blade materials: all kinds of tile and cement board
Carbide blade materials: drywall and plastics like PVC and vinyl siding
Contains 7/16 in. and 3/8 in. replacement flange washers
High quality blades for optimal performance in various cutting applications
Replacement blades for R87547B RIDGID Brushless 3 in. Multi-Material Saw
Includes: (3) Metal Cutting Wheel, (1) Tile Cutting Wheel, (2) Carbide Cutting Wheel, (1) 7/16 in. Flange Adaptor, and (1) 3/8 in. Flange Adaptor
If you sell the tool. You better sell the cut off wheels. I bought the ryobi cut off tool. And the blade says ryobi on it. But you cant find a 3” x 7/16 arbor cut off wheel anywhere made by ryobi. Rigid and Ryobi got us by the short hairs on this one. Try finding any 3” steel cut off wheel with a 7/16 arbor. Ive went to every web site and hardware store to try and locate that very one. But No. nobody has that size. Not even Ryobi. Im thinking Home Cheapo needs to refund us our money back for these tools !!
5 found this review helpful
Nov 18, 2020
These blades come in so handy especially with the small tool. I was cutting some tile to make a c...
These blades come in so handy especially with the small tool. I was cutting some tile to make a circle for a toilet flange and the blade did it no problem. It fit great on my Milwaukee cut off tool with no issues and I didn’t have to use the extra flanges it came with. And it is very nice that it comes with two extra flanges or washers ,whatever they’re called. Just in case. I was able to cut some big 12 x 12 about quarter inch thick tile at a door threshold to transition flooring. I’ve probably made over 25 cuts and I’m still on the first blade. I don’t recommend using water with it because it does gunk up considering how small it is and it’s probably not good for the power tool. The diamonds on it are still doing great and I’ve even bumped into concrete subfloor doing cuts on installed tile. These blades do create quite a bit of dust but what I like is it doesn’t burn or leave black marks. Cuts smooth and fast. Hopefully RIDGID put these in stores because those small hand cut off tools is hard to find the blades for. But these blades definitely have a long life, cut great and get the job done
For those interested in country of origin, this product was manufactured in CHINA. NOTE: the arbo...
For those interested in country of origin, this product was manufactured in CHINA.
NOTE: the arbor size is 1/2". Make sure your angle grinder is compatible, or you will need a GRINDER ARBOR ADAPTER that fits your machine.
Had the need to replace / cut tile to fit an area being renovated. Worked very well on cutting a single tile after setting up a guide to hold and center the tile.
Blade cuts nicely, having made two passes against the tile for a clean cut.
Also worked well freehand in a close area to straighten jagged tiles left by installer.
If you have ever had to cut tile, you know what a pain it can be. I'm always looking for options...
If you have ever had to cut tile, you know what a pain it can be. I'm always looking for options to make it easier and so I ordered these to give them a try.
I really liked how well these worked. I used one to cut 2 bathrooms and a kitchen and the blade never dulled. It was as sharp when complete as when I started.
They are also a breeze to put on and take off.
My husband is a real DIYer, he does plumbing, wood craft and a lot of other things, He was very happy to get these as they will fit in smaller places that a regular sized cutting wheel. just make sure you check the size to make sure it will fit on your grinder, luckily he had a smaller grinder that they did fit, but they did not fit his full size grinder
Great 3" (76 mm) diamond abrasive cut-off wheels for use on Tile and Fiber Cement (such as Backer...
Great 3" (76 mm) diamond abrasive cut-off wheels for use on Tile and Fiber Cement (such as Backer Board or Siding). They have a 7/16" arbor size (11.1 mm) and can be adapted for 3/8" arbors. They are rated to 20,100 Maximum RPM. The box includes an extra set of flanges (one for 7/16" and one for 3/8"). The set includes three wheels, plus the two flange adapters. The diamond coating around the edge is very thick and seems to have a good amount of abrasive. It holds up well. These work great for little cuts or adjustments. I use my wet tile size for any serious cuts, but its great to have something like this available in a portable cordless tool. Be careful with the dust - wear your safety glasses and dust mask!
I don't have much need for an angle grinder. I bought a cheap one when I needed to cut out a sink...
I don't have much need for an angle grinder. I bought a cheap one when I needed to cut out a sink template from a Formica counter that had the backsplash included. I was very happy to have it when I redid my bathroom and needed to trim 3/8 inch porcelain tiles to accommodate the shower body controls.
I learned quickly that a cheap tool is OK if you're not going to use it much, but the blades need to be top quality. I used a diamond tip wheel for those tiles.
Rigid is a great brand, and I first learned about it in the 1970's when I had to go to plumbing supply houses to get the equipment and materials to renovate my house. These carbide tip wheels are for drywall and plastic. I used in on a small drywall project and I found none of the quick dulling I have experienced in the past.
Small circular saw blades that cut most soft materials with ease. These blades fit on both a 7/16...
Small circular saw blades that cut most soft materials with ease. These blades fit on both a 7/16” and 3/8” saw arbors with the included adapters. The blades cut in either direction and don't need to be mounted for the correct rotation direction like other saw blades.
What's in the box:
3 - Carbide blades
2 – 3/8” to 7/16” Adapters
These 3 blades are listed as suited for cutting plastics and drywall but they also work for other soft materials like copper and aluminum sheet as well as PVC siding. These blades are made for the Ridgid 3" mini saw but they will also work on almost any small circular saw with a 7/16' or 3/8” arbor shaft. I am using this on my 4 3/4" Genesis saw. These blades do a good job of cutting thin sheet metal such as copper, aluminum and other soft metals as well as plastic and drywall.
These make installing outlets in Sheetrock quick and easy since the blades are small and easy to use freehand, it's easy to get nice straight cut outs with this little saw blade.
I am very satisfied with this set of 1 tile cut-off wheels. They are manufactured by Ridgid, a ve...
I am very satisfied with this set of 1 tile cut-off wheels. They are manufactured by Ridgid, a very well known company, although they are made in China.Set includes 3 wheels and two adapters, they are 3" diameter by 7/16". The adapters are 7/16 to 3/8". they will fit most 3" zip saws. the blades are heavy duty, and will cut all types of tiles, cement board. They are very high quality. I personally recommend using water when cutting to eliminate dust, also wear googles and respirator for your health, cut out doors if possible.
The Ridgid 3 Inch diamond cut off wheel works great on my old air cut off tool that I use to cut ...
The Ridgid 3 Inch diamond cut off wheel works great on my old air cut off tool that I use to cut and trim small tiles and to trim up bigger tiles. It is a good quality blade that last for many cuts. I got the 3 pack and that will last me for a long time. It fits a 7/16th arbor, but I have the adapter to make it fit on my smaller arbor and it works great !