Internet #100375168

Model # RTA2Z

Store SKU #642459

Store SO SKU #592854

0044315018602

RTA 16-Gauge ZMAX Galvanized Rigid Tie Angle for 2x Nominal Joist/Post

  • 16-gauge steel construction for strength
  • Pre-drilled in an offset pattern to prevent splitting
  • Corrosion-resistant galvanized finish for durability
$ 2 24
Buy 50 or more  $2.02  

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

  • 16-gauge steel construction for strength
  • Pre-drilled in an offset pattern to prevent splitting
  • Corrosion-resistant galvanized finish for durability
Not only do angles make joints stronger, they also provide more consistent, straight corners. Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed. Some can be bent (skewed) to match the project. For outdoor projects or those where moisture is present, use our ZMAX zinc-coated connectors, which provide extra resistance against corrosion (look for a "Z" at the end of the model number).
  • Provides a strong 90° connection without 45° cuts or angled fastening
  • Fastens wood members on two sides, eliminating the need for angle bracing
  • Ideal for gates, fences or any project where a 90° connection is needed
  • Made from 16-Gauge steel
  • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with SD 8 in. x 1.25 in. strong-drive screws
  • Shop all Simpson Strong-Tie here.

Product Overview

  • 16-gauge steel construction for strength
  • Pre-drilled in an offset pattern to prevent splitting
  • Corrosion-resistant galvanized finish for durability
Model #: RTA2Z
Sku #: 642459
Internet #: 100375168

Not only do angles make joints stronger, they also provide more consistent, straight corners. Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed. Some can be bent (skewed) to match the project. For outdoor projects or those where moisture is present, use our ZMAX zinc-coated connectors, which provide extra resistance against corrosion (look for a "Z" at the end of the model number).

  • Provides a strong 90° connection without 45° cuts or angled fastening
  • Fastens wood members on two sides, eliminating the need for angle bracing
  • Ideal for gates, fences or any project where a 90° connection is needed
  • Made from 16-Gauge steel
  • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with SD 8 in. x 1.25 in. strong-drive screws
  • Shop all Simpson Strong-Tie here.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
5.5625
Product Length (in.)
5.9375
Product Width (in.)
5.9375 in

Details

Color Family
Silver
Connector Finish
G185 Galvanized
Connector recommendation
Angle
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Gauge
16
Material
Steel
Number of Pieces
1
Package Quantity
1
Product Weight (lb.)
0.32lb
Returnable
180-Day
Staggered Nail Pattern
Not Staggered
Strap Type
Tie

Warranty / Certifications

Manufacturer Warranty
Yes

Specifications

Dimensions

Product Depth (in.)
5.5625
Product Length (in.)
5.9375
Product Width (in.)
5.9375 in

Details

Color Family
Silver
Connector Finish
G185 Galvanized
Connector recommendation
Angle
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Gauge
16
Material
Steel
Number of Pieces
1
Package Quantity
1
Product Weight (lb.)
0.32lb
Returnable
180-Day
Staggered Nail Pattern
Not Staggered
Strap Type
Tie

Warranty / Certifications

Manufacturer Warranty
Yes

Questions & Answers

Would these be acceptable to use as a reinforcing mechanism for 2 LVL 2x12 (1' 3/4" x 11' 3/4") w...

Would these be acceptable to use as a reinforcing mechanism for 2 LVL 2x12 (1' 3/4" x 11' 3/4") which are nailed together, and already in place on top of 2 2x jack studs? To be more specific: the beam is already installed to manufacturer guidelines; however, it's an old work project, and there are a lot of "colorful" things going on in the home. I'm simply wondering if this would be an acceptable additional reinforcement mechanism between the built up 2 ply LVL and the 2 jack studs. Thank you
Asked by: Matt
I have used these for just that purpose. If the LVL is already supported with jack studs, then these used to just hold the jack studs to the LVL is fine. No weight is on them, they just prevent the LVL from sliding out of the pocket.
Answered by: diyer
Date published: 2020-03-07

Does Simpson Strong -Tie make a connector to hold a 2x4 header in place without a cripple for sup...

Does Simpson Strong -Tie make a connector to hold a 2x4 header in place without a cripple for support
Asked by: Ric
It sounds as though you are looking for a Header Hanger which we offer, but not for a 2x4 header. Please see the HH4 here on the Home Depot website. Thank you!
Answered by: SimpsonStrong-Tie
Date published: 2018-08-04

What are the dimensions?

What are the dimensions?
Asked by: David
The dimensions are: Product Depth (in.) 5.5625 Product Width (in.) 5.9375 Product Height (in.) 1.435
Answered by: Communityanswer
Date published: 2019-04-20

Why does the title say 16 Gauge and later in the description it says this product is made out of ...

Why does the title say 16 Gauge and later in the description it says this product is made out of 18 Gauge. It should all match so there are no major mistakes made in any submittals.
Asked by: Boon
The RTA2Z is 16 gauge. A request has been submitted to have this corrected. Thank you!
Answered by: SimpsonStrong-Tie
Date published: 2017-05-03
  • y_2020, m_5, d_27, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_100375168, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • QUESTIONS, PRODUCT
Get Everything You Need
Get Everything You Need