
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Keep your outdoor space dry and shaded with sedona brick SUNTOP roofing & siding sheets. Composed of foamed corrugated polycarbonate, easy-install SUNTOP adds 100% shade and protection to DIY pergolas, awnings, sheds, as well as resistance to harmful UV radiation. Lightweight yet tough and rigid, SUNTOP won't dent like typical DIY corrugated metal panels, and will outperform fiberglass panels. These durable, rust-proof sheets can be used as a covering for just about any type of open-sided or enclosed outdoor living space, storage, or shelter.
Coverage Area (sq. ft.) | 24 sq ft |
|---|---|
Product Length (ft.) | 12 ft |
Product Thickness (in.) | 0.063 in |
Product Width (ft.) | 2.2 ft |
Rib Height (in.) | .5 in |
Color Family | Red |
|---|---|
Color/Finish | Sedona Brick |
Material | Polycarbonate |
Pack Size | 1 |
Product Weight (lb.) | 7.7 lb |
Returnable | 90-Day |
Roof Panel Profile | Corrugated |
Use Type | Gazebo, Greenhouse, Pergola, Shed |
Manufacturer Warranty | 10-Year Limited |
|---|
Hello! The longest length available in the Suntop Foamed Polycarbonate Panels 12'.
Hello, Please refer to your municipality for local building codes.
Hello! Palram's Suntop Corrugated Foam Polycarbonate Panels are completely opaque.
Hello! Palram's Suntuf offers profile-matched polycarbonate ridge caps specifically designed to cap and seal the peak of an A-frame or dual-pitch roof.
Hello, If the manufacture guidelines are followed accurately, Suntop panels can be bent slightly along the grain. Please refer to the manufacture's installation instructions.
Hello, The wind rating on the Suntop panels is directly related to the purlin and rafter spacing along with the amount of hardware used. Please refer to the manufacture's installation guide for the wind rating based on your specific installation.
Can you walk on it?
Hi RaeP, For a free-standing pergola, horizontal closure strips are typically recommended but may not be absolutely required in every installation. Their primary purpose is to help close off the corrugation openings to reduce wind-driven rain, insects, debris, and drafts — not just for appearance.” They are most commonly used at the high and low ends of the panels, especially beneath ridge caps or at eaves, to create a cleaner and more weather-resistant installation.
Please be advised that SUNTUF panels are slick, non-porous plastic, so paint doesn’t naturally stick well. They expand/contract with temperature, which can cause paint to crack or peel over time. If you choose to panel them the warranty would be void.
Viewing 1-8 of 409
4.6 out of 5