Tile, wood, drywall, glass, plaster, nails. The Vaughan Rage 15 in. demolition tool quickly dispatches whatever stands between you and a finished job. And you'll get the job done faster and easier, since The Rage replaces a hammer, pry bar and nail puller in 1 brutally effective tool. Pick it up and feel the balance and heft. It weighs just 2.5 lbs., with strategic weight placement for maximum momentum with minimum effort. The I-beam frame is forged from high carbon steel for maximum stiffness and force transfer. The finished tool is heat-treated then powder coated and polished for lasting good looks. The double-injection handle features a patented asymmetrical shape for maximum comfort and control. So you can put the hurt on everything but you.
Upon receiving this tool in the mail I have seriously put this thing to work. It takes the place ...
Upon receiving this tool in the mail I have seriously put this thing to work. It takes the place of 3 tools needed for demolition and it does all 3 jobs to profection. I really like the hatchet like end that allows you to chop and pry with no problem. Amazingly I like the narrow hammer end also. This tool really increased my demolition skills. Suggest you give it a try.
Not just a demo bar, you will also find this useful for framing construction. 2x limber fits in ...
Not just a demo bar, you will also find this useful for framing construction. 2x limber fits in the saddle area of the bar for tweaking and twisting prior to nailing in place. You can only twist studs by hand a small amount, but this will give you a lot more leverage.
There are plenty of other surfaces on this tool for demo work, like nail pulling, prying, hammering, chiseling, scraping, ramming and smashing. A good large rubber grip make handling easier. Weighing in at 2-1/2 pounds, it isn’t so heavy that you will become fatigued, and it isn’t too light to do some serious work.
Some other things that I would consider requirements before using this tool are safety glasses, gloves, and a dust mask for demolition of old work.
One improvement that I would make if I had designed this tool would be to give it a bit of color. It’s too easy to loose tools in a demo site, and the grey color of this tool would only make it harder to find. I plan on giving it bit of orange or yellow paint from a spray can, at least on the ends.
I love the features of this tool. It's a "hammer companion". Great for Demolition & Framing. It ...
I love the features of this tool.
It's a "hammer companion".
Great for Demolition & Framing. It has enough weight to carry heft in a swing.
Dont expect to use as a hammer as the small surface will be difficult to successfully contact nail heads as a traditional hammer would.
I like to use it for twisted studs but you can't always get it into position especially if there is an obstruction or your framing a pre-existing wall.
9ver all I would recomend!
The FatMax functional utility bar is constructedThe FatMax functional utility bar is constructed from one piece of solid forged steel for strength and durability. This tool can be utilized in a variety of situations. Difficult nails can be removed with the beveled nail slot.See Full Product Description
Annihilator 18 in. Wrecking and Utility Bar with 12 inch bar
We created the baddest, meanest utility barWe created the baddest, meanest utility bar ever. The Annihilator will make short work of the most difficult jobs and includes the Demolition Hammer used for breaking down hard surfaces, as well as other general hammer uses. The Dead On Tools Annihilator 18 in. Wrecking/Utility Bar in black is the perfect tool for demolition and putting things back together. Chisel, smash, crack and chip away at tile, concrete, brick and other hard materials. And when your day is complete, you can use the bottle opener under the hammer head to pop open your favorite beverage. The Dead on Tools AN18 demolition hammer features a board claw for adjusting wood and drywall positioning, a wire stripper, drywall rip axe, 2 nail slots, and nail puller. At an overall length of 18 inches with a 12-inch bar length, this Annihilator Utility and Wrecking Bar is great for straightening and adjusting boards into proper positions before tacking. Great for use on standard board sizes. The demolition axe can be used to tear and rip through drywall, wooded slots, remove shingles, and can wire strip through a conduit. The Annihilator is our answer to the toughest jobs out thereSee Full Product Description
15 in. Functional Utility Bar
The FATMAX functional utility bar is constructedThe FATMAX functional utility bar is constructed from 1-piece of solid forged steel for strength and durability. This tool can be utilized in a variety of situations. Difficult nails can be removed with the beveled nail slot.See Full Product Description
18 in. Indexing Demo Pry Bar
The Crescent Indexing Flat Pry Bar featuresThe Crescent Indexing Flat Pry Bar features a 90° flat head for better access and wider support when prying against surfaces. The head indexes over 180° and locks into 15 different positions for unparalleled access and utility. The raised, reinforced wedge on the back of the indexing head provides a solid striking surface to hit for loosening and penetration. It is completed with a durable 2-tone dual material grip that provides comfort, control and added safety during use or transport around the jobsite.See Full Product Description