These are just drip pan liners!!! Cheap tinfoil inserts...if you can rig up where it would hang? Might work??? Isn't a 22" charcoal??? Don't think that you would need it??
Drip pan #6415 6” wide (rim to rim) 8 1/2 long 1.4 “ deep It slides perfectly under my Weber Q1200 portable tabletop grill.
liners that fit inside of your existing drip pan. Pretty sure it will fit? Look up the pan on Webers parts website and see if the pans are the same size as the Genesis series? If it is then it will work! That's what they were made for
There are two ways to ignite burner 1. The first is by using the Crossover® ignition system built into your grill. The second is with a match. Assuming your gas source is in the open position and gas is flowing, 1. open the lid to your grill. 2. Make sure ALL burner control knobs are turned off . Check by pushing control knobs in and turning them clockwise until they stop. The burner control knobs must be in the off ( ) position before you turn on the gas cylinder valve. 3. Turn on the cylinder valve using one of the appropriate options based on your cylinder and regulator type 4. Push burner 1 control knob in and turn it anticlockwise to start/high ( ) position (3). IMPORTANT: Always ignite burner 1 first. The other burner(s) ignite from burner 1. 5. Push in the igniter button several times (4). You will hear the igniter click. 6. Check that burner 1 is lit by looking through the cooking grates. You should see a flame. If burner 1 fails to ignite within five seconds, stop, turn the burner control knob to off and wait five minutes to allow the gas to clear before you try again or light with a match. 7. After burner 1 is lit, you can turn on burner 2 (and burner 3).
Last reply is CORRECT. Someone should correct the Specifications for the product!!! (Weber?).
They fit in the original drip pan. If they are not changed frequently, however, they will leak and fall apart when cleaning the grill.
These are cheap tinfoil liners that fit inside of your existing drip pan. Pretty sure it will fit? Look up the pan on Webers parts website and see if the pans are the same size as the Genesis series? If it is then it will work! That's what they were made for
Yes. I am using these with my Spirit E-310 and they fit perfectly.
Look on weber.com