The Zenith Floor Lifter was designed to bring the same utility and performance of the Trim Puller combined with the common and practical hand work of a chisel. The integrated wedge of the Floor Lifter has a larger angle for more aggressive extractions on bigger jobs. The Floor Lifter is excellent for wood flooring, wooden or vinyl siding, oversized boards and planks. Wood, ceramic tile, just about any surface can be worked efficiently with the Floor Lifter. It has the same integrated center wedge as Trim Puller that increases removal efficiency and prevents damage to both trim and wall. Its longer design provides for a deeper plunge on wider baseboards and trim. Its Z shape design is also ideal for crown molding removal. Great at scraping textured ceilings with its ability to accept standard extension handles, it also can be used as a hook to rip off vinyl or aluminum siding or hanging ceiling planks. And a Zenith specially designed extension handle allowing for aggressive tapping to extend your reach, just screw it into the end of the handle. The new extension handle will allow you to remove flooring and other materials reducing time spent on your knees. The 48Rc heat treated steel and a comfort handle insure great performance and durability. The Floor Lifter has more uses than any other tool in the category. Pull, Pry, Lift and Scrape. More uses, less tools, save you money.
Ideal for removing harwood and tile floors: The Zenith Floor Lifter is designed specifically for safely removing hardwood floors, ceramic tile, trim, nail or glued countertops and it’s great to scrape off popcorn ceilings; it’s the ultimate demolition and remodeling multi-tool
Integrated center wedge tackles larger removal projects without damage: the floor lifter has a larger angle with the integrated wedged center that provides increased removal efficiency for more aggressive extractions on bigger jobs and its longer design provides for a deeper plunge on wider baseboards and trim; eliminating the need for a shim or small board spacer
Pull it, pry it, lift it, and scrape: the floor lifter has more demo and remodel uses; it does all the work of a wrecking bar, flat pry bar or claw eliminating the need for a shim or small board spacer, which means less tools, saves time and money
Add the exention handle (sold separately) which will allow you to remove flooring and other material reducing time spend on your knees and is great for scraping ceilings
Comfort grip, shock-absorbing edpm handle: this trim puller is capped off with an edpm handle that feels comfortable in the hand while offering exceptional shock absorption
Durable steel construction-built to last: the 48Rc heat treated steel construction provides lifetime durability with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases
I've only used a pole type floor lifter, though for a hand held, I've used anything handy like a ...
I've only used a pole type floor lifter, though for a hand held, I've used anything handy like a putty knife, small pry bar or chisel. I was very excited to give my new Zenith floor lifter a try.
First impression: This is a nice solid tool. The blade is thick (see picture below), there's a nice edge and I like the lifter center (lifts the tile as I pry). The handle is well made and solid and as a bonus, the black cap unscrews and can be put on a pole. Note that the cap is also very heavy and well made.
Use: I had some old square tile flooring I needed to pull, before installing the new laminate. I started in the corner of the tile and with a light tap, the tool pried under the tile and up popped the tile! I did the same to the next tile and with one tap, it was up. I did the entire row very quickly and was on to the next row. This tool is a huge time saver!!!
Observation: The edge stayed sharp the entire time. There was some old glue and paper from an old laminate installation - I hit it with the tool and it came up easy. The heft of the tool and the solid cap (where I tapped) made the job easy. No flexing of any part of the tool. I felt confident when I hit the cap with my hammer. I also used it to pull tack strips when I pulled the carpeting and it's much better than using a pry bar and hammer.
Conclusion: I wish I would've had one of these years ago. I've been working on homes since the late 1980's and I grabbed whatever tool was around. Using the right tool makes all the difference, it saves time and it's also much safer. I highly recommend this tool for anyone pulling old flooring up or tack strips. I highly recommend it.
Well designed rugged durable effective prying tool. Selected the Zenith Floor Lifter to remove trim without damaging old fragile plaster. Tool performed as expected without hammering typical pry bar or trim puller tool requires, exactly what was needed to preserve plaster. The vertical handle and blade is heavy enough to force behind trim by hand using the tool weight to loosen trim then the large surface area allows prying over a large enough area to not damage plaster. Much easier than trying to protect plaster or damage by hammering. Tools weight and large handle make removing trim by hand quick and easy. Scraper blade was great for removing old wallpaper and smoothing rough plaster too. Tool also great for working with old barn boards. Removing them without damaging turned out to be an added bonus the Zenith Floor Tool was great for. A great all around prying tool for many tasks.
The overall quality is quickly apparent as soon as you handle and use this tool. This is well equ...
The overall quality is quickly apparent as soon as you handle and use this tool. This is well equipped, versatile, and made to last for years.
• Starting with quality, it made from a high quality treated steel. This is not going to bend under normal use. I’m very impressed with how this tool is made and how it will hold up even with severe usage.
• The handle is easy to grip and stays in your hands without slipping.
• With this tool you can scrape, pull, pry, remove nails, etc.
• You can add an extension by removing the screw cap to reduce the amount of time you spend on the ground.
• I mentioned the versatility earlier. This is good for removing trim, boards, siding, wood flooring, and scraping texture from a ceiling. The uses are pretty much unlimited. Tools like this often fall into the 'must have' category.
This is a great tool with more uses than most will realize. I recommend.
This Zenith Floor Lifter Hand Tool is a beast. When I ordered it online I didn't realize just ho...
This Zenith Floor Lifter Hand Tool is a beast. When I ordered it online I didn't realize just how beefy this thing is. I provided a picture of a standard-size hammer next to it just so you can get an idea of what I'm talking about, it's a big tool. The tool is very sturdy, it doesn't feel like it's going to give at all when you're prying or hammering it. The raised wedge in the middle does all of the real work for you, as you push down, or hammer down, the wedge moves whatever you're lifting away from the flat surface (leaving very little prying to the hands). The handle is big and comfortable, and the black knob on the back end of the tool unscrews if you need to use an extension handle with it. The knob is steel and very heavy as well, so you don't have to worry about beating the end of the tool to death, there's no chance you're going to hurt it. The width of the blade is approx. 4" and that provides you with at least twice the area of a standard pry bar. Altogether I think this tool is awesome and for my large flooring job I plan to get at least one more of these so my wife and I can work on the tear-down together.
The Zenith floor lifted took is a game changer. It has many uses but what really impressed me was...
The Zenith floor lifted took is a game changer. It has many uses but what really impressed me was the job it did on removing my base boards and crown mounding, with great ease I was able to remove these and keep them intact. Usually I would do this with a putty knife or demolition bar and would end up just replacing but not anymore. This scraper also has a removable back for hooking up a broom stick too to save your back when using on floors.
INNOVATIVE DESIGN; MULTIPURPOSE; WELL-MADE — The Zenith Floor Lifter Hand Tool is an outstanding ...
INNOVATIVE DESIGN; MULTIPURPOSE; WELL-MADE — The Zenith Floor Lifter Hand Tool is an outstanding tool to have if you are removing a floor. It would have been helpful to have had last year when I was removing a ceramic tile bathroom floor. I used a brick chisel but this tool would have worked much better since it is thinner and has a lift capability. This well-designed tool has secondary uses. A unique feature is that the end of the handle may be removed to insert a long screw-on extension (such as from a broom). This configuration makes it easy to use as a floor or ceiling scraper. You may not be able to exert the force that you would be able to with the regular handle and a hammer but for some types of scraping, it is a useful tool. The tool may also be used to carefully lift furniture high enough to place sliders under it to simplify moving. The handle has a hole for hanging up the tool..
When remodeling the task of removing old flooring can be pretty brutal and you need a tool that i...
When remodeling the task of removing old flooring can be pretty brutal and you need a tool that is heavy duty and this one from Zenith is definitely made to do the job for years. It has a chisel type front end with a notch for pulling nails if you need that, no need to get up off of your knees and get a pry bar. It has a very comfortable handle that is made from some type of very durable plastic. The end of the handle has a metal plug that threads into a female fitting that will accept and extension handle. When the metal plug is threaded in it's very strong so that you can hit it with a hammer to get the chisel end under any type of flooring. If you're demolishing old floors you will be glad to have this tool.
The zenith floor lifter is a very nice hefty demo bar. The bar does have some weight to it. The b...
The zenith floor lifter is a very nice hefty demo bar. The bar does have some weight to it. The bar is made from nice thick steel. It has a nice shape and hand grip that makes it easy to hold and work with. This bar is Practically indestructible, about the only thing you have to worry about is losing it or it growing legs and walking off. It gas a very nice falcom point to help with leverage
This floor lifter hand tool is awesome. Full disclosure, I haven’t put it to use yet on floors as...
This floor lifter hand tool is awesome. Full disclosure, I haven’t put it to use yet on floors as I have a power tool for that. That being said, this is the perfect tool for removing baseboards. The offset angle on the blade allows the handle to be in a good position for tapping on it with a hammer. Also the lifted plated helps pushing the baseboard away from the wall. The blade itself its fairly wide, so there is a lot of area on the blade to prevent damaging the drywall. There is a metal end cap on the handle that can be removed so that an extension piece can be attached.
I wanted a tool like this for some time now. with a job coming up i had a reason to get one. it a...
I wanted a tool like this for some time now. with a job coming up i had a reason to get one. it arrived in four days, in new condition. the first thing i noticed is, it is heavy and large. it is made from one piece of plate steel, 1/8 inch thick. this a heavy duty tool !! the but cap screws off to use and extension pole. nice. this is a serious tool, i like it.
Trim Puller Multi-Tool for Baseboard, Molding, Siding and Flooring Removal, Remodeling
The Zenith trim puller is a patented toolThe Zenith trim puller is a patented tool that does all the work of a pry bar and claw without damage. The Trim Puller is designed specifically to safely and easily remove baseboards, molding, door casings and decorative panels without damage to the trim or to the wall and without the need for a shim or small board spacer. It has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall. Ideal for repair and remodel projects where care and precision are needed including cabinets, countertops, Trim, flooring and many more. An impact absorbing EDPM rubber handle provides increased user comfort and its robust 48 Rockwell c heat treated steel construction provides durability. If demolition and Trim removal for remodeling is your aim well the Trim Puller will make fast work. Save Time, Save Trim, Save Cash and Stop Damaging Walls. Switch to the Trim Puller Today for all your remodeling and demolition projects.See Full Product Description
8 oz. 12 in. Titanium Clawbar Nail Puller with Dimpler
The Stiletto TiCLW12 is a 11.5 in. SolidThe Stiletto TiCLW12 is a 11.5 in. Solid Titanium framing nail puller with a Dimpler feature. The TiCLW12 has Titanium strength, yet is lightweight in the hand and pouch. The patented Dimpler feature makes pulling nails cleaner and easier. Stiletto Tool Company has been synonymous with high quality hand tools dating back to 1849. With its long history and strong reputation, the brand has evolved into the modern day standard for innovative, lightweight, ergonomic, productive, and professional tools. We set the standard with our line of premium titanium hand tools that span numerous trades such as framing, remodeling, finish work, siding, demolition, concrete, and drywall. Titanium is 45% lighter weight while providing the same striking force and strength as steel. Titanium tools also produce 10 times less recoil shock which helps reduce carpal tunnel syndrome. The combination of these features means less down time, more productivity, and most importantly less pain while working.See Full Product Description
Self-Prying Pro-Bar Hand Tool
The Zenith Self Prying Pro-Bar is a dynamic,The Zenith Self Prying Pro-Bar is a dynamic, patent pending tool from the makers of the Trim Puller. The Zenith Self Prying Pro-Bar lets you Save It or Wreck It or both, FAST saving you time and money. The tool is designed for multiple jobs like wrecking and demolition as its beveled edge and integrated closed wedge allow for PRECISION SALVAGE when high value materials are involved. The Self Prying Pro-Bar functions as a best version of the Trim Puller as it does all the work of a flat pry bar, wrecking bar or claw and is the ultimate tool for removing large floor tiles, planks, framing and sub-flooring. The unique self-prying action utilizes the strength of the closed wedge to easily separate anything with reduced effort. It removes baseboards, molding, door and window casings without damage to the trim or to the wall when a bigger tool is needed and eliminates the need for a shim or small board spacer. Ideal for repair and demolition projects, it’s great for deck removal, pallet busting and storm clean-up. The Pro Bar has 2 integrated precision nail removers, one located in the 90 angled face and the other in the tail. A contoured grip provides increased user comfort and its robust 48Rc heat treated steel construction provides lifetime durability. If destruction, demolition and salvage is your aim the Self Prying Pro-Bar is the best multi-tool you need to Lift It, Separate It, Destroy It, FAST. So Save It or Wreck It, the Self Prying Pro-Bar lets you do it FAST.See Full Product Description
26 in. x 3/4 in. Drain Grate and Manhole Cover Lifter
Bon drain grate and manhole cover lifterBon drain grate and manhole cover lifter allows you to life storm drain grates safely while protecting your hands from injury. The heavy-duty high carbon steel hook fits most grates. The products 26 in. L and handle makes lifting easier while helping to prevent back and other injuries.See Full Product Description