Martin 26 in. Light Grey High Back Solid Wood Frame Swivel Counter Height Bar Stool with Faux Leather Seat(Set of 2)

Great product , one chair had wrong - same size cross pieces Which was corrected ! Or 5 stars

Bar stools look very nice. There was no instructions in our box at all so it was a little confusing as which support brace went where because there are two different lengths.. the seats are a nice size but set a little firm.

The Martin 26 inch Navy blue leatherette solid wood frame with swivel is a fantastic edition to any room requiring a comfortable, sturdy and aesthetically pleasing chair. The quality looks and feels expensive and will provide years of trouble free enjoyment. The chair came with easy to follow step-by-step instructions with illustrations along with all of the necessary tools required making for an easy no rush 15 minutes installation.

This counter height bar stool is very nice looking after assembly. After I unboxed the stool, from start to finish it took me about twenty five minutes for total assembly. Every part I needed was included in the blister pack and the Allen wrench was also included. I did have to use my own Philips screwdriver for the cross members on the legs. After assembly, it swivels very easily, and the adjustable gliders on the bottom of the legs glide on the tile floor without scratching.

This is a nice bar stool that is also very comfortable. It seems to be of very good quality and the workmanship is very good. The padded back feels good and I don’t sink very far down when I sit on the cushion. I don’t like that the material soaks up drink or food and is more difficult to clean than faux leather would be. Our grandkids will make quick work of this fabric seating. It is very sturdy with great bracing and cross bracing on the legs. It comes with non-marring feet that screw into the legs and allows adjustment for uneven flooring. The rivets around the seat and back will keep everything in good shape. While I got this one to try, I will be going with vinyl or faux leather seating for our breakfast bar instead, as it will be much easier to clean up drink spills or food crumbs than this material. It took around 20 minutes to assemble this stool. It comes with an allen wrench for the bolts and a Phillips head screwdriver was all I needed. I will tell you that they recommend that you don’t use a power tool to assemble the legs. I didn’t completely follow that rule as it was much easier to start the wood screws with the power drill/driver. I set the torque low enough to keep it from over-tightening and causing damage and finished tightening with a Phillips screwdriver. Everything came out well.

Martin 26 in. Linen High Back Solid Wood Frame Swivel Counter Height Bar Stool with Fabric Seat This bar stool stands out because of the quality design, plus the added touch of nailhead trim. It appealed to me because I love fabric stools, especially with the swivel feature. This stool is described in some of the fabric titles using the word "linen", while others were called "ivory". I asked the virtual assistant if the actual fiber was linen, or only the fabric color. They had no answer but suggested I ask that question at the product page. There my question was answered the next day saying the fiber content was 100% polyester, and the word linen referred to only the color. I find this bar stool extraordinarily comfortable. I could feel the support from the high density foam, as soon as I sat down. Many bar stools look comfortable, until you actually sit on them. I know my guests will appreciate the choice of more expensive stools for their comfort, and not having to sacrifice good conversation, because of uncomfortable seating. The seat size specs are 16" x 19", but for a good fit among multiple stools, we realized the diameter of the swivel seat, must be considered . We planned on 2 stools, and measured the seat's diagonal as 23”, so I made sure there was plenty of spacing for them to turn. I like that I can order 1, 2, or 3 stools to accommodate my needs, and ordering multiples can save me some money. The product title includes the words high back, yet the specs say low back. When the product arrived, we could see it was definitely a low back item. Standing at our counter, as I showed in the pictures, the back of the bar stool did not block any of my view. I was happy to see that the bar stool came with the seat itself fully assembled. All that was required was to attach the legs. We had a hard time turning the screws, most likely because of the quality hardwood. As a result we did have to carefully use our power screwdriver, even though the directions asked us not to. We were careful not to over tighten. I am very pleased with these bar stools, and they are a definite upgrade to my bar area.

The stools were wrapped securely and in sturdy packaging. All the parts were in the box except as the instructions noted I would need a screwdriver which was not included. I used a battery screwdriver, which I highly recommend, and it was a very easy assembly, taking me about 20 minutes for each stool. They are sturdy and comfortable and have a nice swivel. The height of the stools are perfect for my counter.

We currently have 2 aging bar stool chairs at our breakfast area and thought to give this one a try. It came in one large box with 3 different packets. One packet was the actual chair in one piece, other was a packet full of the legs and the last all the hardware. The time it took to put the chair together from start to finish was 25 minutes and that was with me having to re-position the legs because I put them in the wrong spot. If I read the directions first it likely would have been fifteen minutes. Screwing in the cross supports wasn't bad but you have to make sure you apply pressure to the leg you are screwing them into to ensure the screw sits tight and doesn't push the support out. It recommends sitting the chair upright before tightening everything down. If you do this, tighten the top bolts that attach the legs to the cushion and then flip it back over to tighten the screws. You won't be able to get enough force on the screw driver to drive them in if you do it upside down. As for the chair, it is wonderfully comfortable. Fabric feels heavy duty so it isn't going to rip with the kids on it but also doesn't look so delicate that if they spill something on it that it won't get clean. The hardware and quality is top notch and something I would expect as it isn't going to break anytime soon. The swiveling is perfect as you aren't going to just twirly around while sitting but it doesn't require a lot of energy to circle around and get out. I was concerned about the height as it was a little shorter than my other stools but with the 4 inch cushion it provides a comfortable seat and you sit at just the right height for the bar.