Hello, to achieve longer lengths: provide a minimum 4-inch to 6-inch overlap where the upper panel meets the lower panel. Always install vertical panels from the bottom up. This ensures that the upper panel overlaps on top of the lower panel, preventing wind and moisture from driving directly into the seam. Place a horizontal support (purlin or blocking) directly behind the overlapping joint so you can securely fasten through both panels. Use Palram's EPDM washered screws through pre-drilled holes to allow for PVC thermal expansion.
Hello, Palruf's PVC panels are 0.032".
3 in. on center
The Hunter Green and Misty Green also come in 49.6" x 8'.
The clear panels are 90% light transmission
Is this an enclosed structure, PVC cannot be used on an enclosed structure. You cannot attach directly onto shingles. Instead, you create a raised structure over the shingles.
You can use 100% silcone to patch the panel
PVC is rigid, you should use Polycarbonate which is more flexible.
