Customer Reviews for Everbilt Wide Angle Full Overlay Nickel 165° Hinge Set (2 Pieces)

This hinge is a heavy duty type for your closet. It comes with all the needed screws to install or replace an existing hinge. It has a 165 degree hinge to it, also has a 1 & 3/8 inch overlay, making it a wide angle hinge. It’s capable of supporting a heavy or larger sized closet door. This is NOT a soft close hinge, you’ll need to mount a bumper to stop it from slamming.

This is a heavy duty wide angle (165 degree) hinge set. I needed a replace hinge for a shop cabinet in my workshop that the hinge had been damaged. Since the mounting hole was already drilled the install was very easy. The hinge set came with the installation instructions and the required hardware to install on a frame or frameless cabinet. I used the frameless bracket option to install the hinge. I like the 165 degree hinge which is heavy duty and should stand the test of time. Very pleased with this 2 piece hinge set.

we use it for a rental where it's a little tight if the door is opened 90 degrees since it'll block the fridge from opening. Tenant asked if there was anything that allows the door to open a little more since she likes to keep it open but not be in the way of the fridge door. she works out of the kitchen a lot. we thought it was kinda weird but glad we found this for her.

The Everbilt Wide Angle Full Overlay 165 Degree Hinge is very sturdy and well built. They can hold heavy cabinet doors securely in place. They also have a bit of snap to them when they open and close. It's nice that they are hidden, and don't take up extra room on the frame. They also a soft, brushed tone, so even the inside of your cabinets can look nice.

This 165 degree cabinet hinge works as expected. Hinges come with hardware to perform a frame and a frameless installation. Installation is typical of cabinetry hardware. Hinges offer a tight snug firm hold and a tight squeeze with closing. Hinges allow for wide opening of doors. Hardware is very large and sturdy. Solid hardware for your cabinets that won’t leave you hanging.

Everbilt wide angle full overlay hinges are very heavy duty. If your doing a door in front of pull out draws they are what you need with a open angle of 165 degrees it will open far enough to get them open. They come with instructions just in case you need them. And everbilt always uses top notch materials. The lazy susan I am putting together these hinges will work perfect.

I was glad to get my Everbilt wide angle full overlay 165° hinge set. They came in a package with two hinges and all the hardware to install them. It also came with an additional mounting plates for face frame applications, this hinge is dual purpose for frameless and face frame cabinets. The instructions that came with the hinges were very easy to follow. I removed a set of old hinges and installed these. My wife really likes them because the door opens a lot more and makes it easier for her. I will be changing a few more of them for her in the future. The only thing that would make these hinges better is if they were the soft closing type.

A nice hinge overall. The 165-degree opening is useful for cabinets that have sliding shelves behind the doors. The hinge set will work with either frameless cabinets, or for cabinets with face frames. The hinge has a snap connector allowing one to easily remove the door, but I wouldn't have guessed it was there - I only found it because I knew it was somewhere.

I selected the Everbilt Wide Angle Full Overlay 165° Hinge Set (2-Pack) as I am building a kitchen bench with storage under the seat and needed hinges to assist with lifting and holding the seat up to access the storage area. I love the opening as it allows the seat to be opened all the way and has the pressure to keep it open while I am accessing the storage area. It was easy to install using a door hinge jig to guide the process of drilling the mounting holes and attaching the hinges. I also used a forstner bit to make the required hole for the hinge and wood drill bit for pilot holes. I recommend using these tools to assure that you get the hinges mounted correctly. The package did not come with instructions so you may want to review a how to video if you have not used this type of hinge before. It is a great size for the 5’ x 14” seat used in this application. I would recommend this product.

I have been a builder and remodeler for 51 years. Often I have jobs where I need to build and install cabinets. For cabinet doors where the doors need to open wide, these EVERBILT WIDE ANGLE FULL OVERLAY 165-DEGREE HINGE SET 1-PAIR (2 PIECES) work very well. While the euro hinges may not be for everyone, they are adjustable in every direction, are of high quality, are very durable, and serve very well.

These hinges are much bigger than I thought they were going to be. Fortunately the door side fits in the existing crevices on my cabinet and I don't care if one side of the hinges are bigger than the other. These do open wider and have an "auto close" feature but you don't want to confuse this with a "soft close" if that is what you are looking for. I think these are meant for heavier doors rather than kitchen cabinets, but they work for me regardless.

These Euro-style hidden hinges open wide enough to give you full access to a cabinet - in my case, this lets me install sliding shelves in my custom drill press cabinet base to hold bits and fittings (yet be protected when the cabinet door is closed). These are heavy-duty, and easy to install if you have a 35mm hinge jig. They are forgiving enough to install without a jig, but if you are going to install more then 2 hinges in your life you'll want the jig.

This wide angle (165-degree) hinge set is well made and easy to install. This is a hidden hinge that is not visible when the cabinet door is closed. It does require using a drill or router to make the inset on the cabinet door side. The screws are kind of small, however, there should not be much tension on them. This is a nice design and should perform well.

Good product: Well-made, easy to install. The 150 reviews before mine say it very well. These are self-closing but not really soft-closing. Do note that euro-hinges do not all use the same mounting holes, so when replacing an existing hinge (for wear/tear or for a wider swing) you may have to drill new holes, close to the old holes. Also the "manual" in the baggie is very small, about 1/4 size. Print-out the instructions from this site. These hinges are actually sourced from Hettich in Kirchlengern, Germany.

This is a pretty cool hinge. It does swing the 165 inches of rotation. They are sturdy and easy to install. I installed them on a thermal foil style door. The inside of those doors is a kind of pressboard. As a result I wanted to use cam expansion screws to hold the hinge instead of a standard screw. The result is I drilled the hinge mount holes out to a quarter inch hole. This is only slightly larger than the hole already in the hinge and isn’t a noticeable difference to look at. The hinges are two parts. The main hinge hooks to the door and a mount bracket hooks to the cabinet. There are two types of cabinet bracket. One is for cabinets that have a molding on the face and the other is the one I used.(no molding on the cabinet) Once both are in place, the hinges snap together. There is a button at the back. When it’s depressed the two parts separate. This means it's easy to take a door on and off without wearing out screw holes. (Nice for cleaning or putting in shelves. Although putting in shelves isn't too much of an issue as the 165 degree swing moves the door well out of the way. It also has adjustment screws to adjust the gap between doors. This is a well engineered product.

This pair of concealed cabinet hinges is a good quality set, but they're also expensive. They operate smoothly and quietly, but they do not have the soft close mechanism that has become popular in concealed cup hinges. The hinges come with screws. They require the standard 35mm hole to flush mount the cup part of the hinge. The stainless steel finish blends in well with different cabinet finishes.

Nice, heavy duty hinges, but are not soft close. I'm using these for garage cabinets and don't need the soft-close. I would be hesitant to use these for kitchen cabinets without installing some type of bumper between the door frame and door to soften the close. As the package does not specify soft-close, I'm adding this so there isn't any confusion and it's not meant to be critical. Installation was pretty simple, I have a jig and drill set specifically for these types of hinges. The package comes with standard screws for attaching. I was pleased with the amount of adjustment that the hinges have, I'm not a professional cabinet maker and my skills in precise layouts leave a bit to be desired. The included instruction sheet includes all necessary dimensions, but I found it needed a bit of close study as it includes both dimensions for framed and non-framed cabinets so finding the appropriate dimension required more than a quick glance. Because these are inside hinges, they do take up a little bit of shelf space. All hinges like this do, and careful planning can insure that there are not unexpected issues.

These hinges looks much bigger than inset soft close hinges. They do however have the same features as other soft close hinges from this manufacturer. Namely it very easy to remove doors. You simply need to press a tab on the back of the hinge and it will disconnect from mounting plate. You mostly need to remove doors when you are re-finishing / refreshing cabinet look. But sometimes I removed them to just deep clean them in my kitchen. They have very strong springs and 2 stops at ~80 and 165 degrees. Believe it or not but I noticed that packaging claims that they are maid in Germany.

These are good quality hinges that I got to replace a set that had corroded (my father stored the pool chemicals in the cabinet...not a good idea); unfortunately, the cabinet door fell off and was damaged before I could do the replacement. I did use the screws to replace a few that were missing from my kitchen cabinet hinges...just temporarily until I can replace them (odd size that I cant find in the garage catch-all container). I will say that I did a test of one hinge and it does have a quick action, not the smooth soft close.

This is a pretty nice product, it seems to be built well, and operates pretty smooth. The hinge is spring loaded to keep your door shut and when it’s open it doesn’t let the door close less than 90 degrees on its own. It is nice that you can open the door extra wide to 165 degrees. Another neat feature about this is if you need to remove your door with ease it has a quick connect latch.

I received this hinge as part of the seeds program in a shipment. It is much more functional, heavy duty and well made then I thought when I selected it. It is definitely worth the cost. We used this in our corner cabinet that has a double folding door, if that makes sense. It fit right into the existing holes and can be used in a frameless doir. We have frames and it worked great. My husband said it was very easy to install and was very happy with my selection.

Heavy duty hinge! These wide angle full overlay hinges open to 165 degrees to allow easier access to cabinet contents. They are very well constructed and come with easy to understand mounting instructions for a straight forward install. We are using them to replace the original builder's grade hinges in our kitchen that are beginning to break down. As these hinges are heavy duty, we expect that they will last for quite some time.

I ordered this wide angle 165 degree bracket to modify a cabinet in a hard to reach area of my laundry room. The shoulder high cabinet & door only opens 90 degrees out and is in a difficult position to reach inside to get items out of the cabinet. I thought this bracket would allow the door to open wider and make access easier. I learned that cabinet brackets come in different sizes and that without extra tools and modification to the cabinet that this bracket would not fit directly into the existing holes. That said, this cabinet bracket is made of chromed steel, is corrosion proof and very durable/sturdy, it will open 165 degrees and would have made a nice improvement to my hard to reach inside cabinet, if it would have fit into existing holes

Functional hinge set. I've built a fair number of cabinets as a DIYer and have most of my experience with the premium brand of cup hinge. These are not quite the fit and finish of those hinges but they certainly do the job. The instructions are clear, which is always a challenge with other brands, and the set includes all the screws and clips you need. The only downside is that the hinge is pretty "snappy" from open to closed. I prefer a soft close mechanism, which may be something that can be added but isn't included with this hinge set.

Everbilt's wide angle hinges are super easy to install. I love the fact that these hinges are so easy to install. These are replacing existing concealed hinges. I reused the same cup holes and screws; it's that easy! The wide angle opening of 165 degrees gets the door swing out of the way and makes for easier access to the cabinet and shelves. The hinges came with two sets of mounting plates for either face frame or frameless cabinets. I used the faceframe ones since my existing cabinets had that; they fit perfectly over the existing screw holes. Adjustments to either depth or leveling are easily made with via screw adjustments on the hinges or on the mounting plates. Self-closing mechanism keeps doors closed. Love them! Highly recommended.

This is a review for the EVERBILT WIDE ANGLE FULL OVERLAY 165-DEGREE HINGE SET 1-PAIR (2 PIECES) I used these hinges in my mud room/laundry room cabinets about a year ago and they have held up very well. They are sturdy and can hold doors that are quite large & heavy. The instructions tell you how many hinges to use for larger or heavier doors. These hinges are for door thicknesses of 15-23 mm / 0,59 in. to 0,9 in. These are NOT soft close hinges and do spring back into place, so you might want to put a little cork or stick on felt to quiet them. The sizes of the hinges are in the pics below. Overall a nice hinge for when you need a 165 deg swinging door. If you fund this review helpful please click on the helpful button, thanks! MikeTheReviewer

These are good hinges, they are large but they offer a lot of adjustment when you go to mount your cabinet doors. I like a full overlay because it covers a lot of the cabinet and lets the eyes be drawn to the doors. i don't use these on all cabinets but they are a go-to. They are a bit pricey, but you get what you pay for as these are stout and last a long time.

This pair of hinges seems like a good quality product. The hinges do open nice and wide. Making a door/panel and adding hinges is a very easy project and the instructions online for these particular hinges are very concise and easy to follow. Since I have previously hinged new doors this project took just a few minutes. You need a template tool to make the holes for the hinge and then just a few screws to finish the install.

I got these for hidden hinges - They work well on cabinets - I got these so that we could change the standard hinges we had before - we had to make adjustments to put holes into the doors. This allowed the hignes to fit within the doors flat - I found it be to have forster bits to help with doing the hole cutting - I wish they fit a little different - the hinges tighten and loosen with a set screw - be careful as they will back out - use a little lock tight to hold the screws

These are very nice hinges that come with all the mountings, screws and instructions. They fit exactly into the holes that the replaced hinges had, so I had no drilling. I used these on lower kitchen cabinets that are larger doors and each carries a heavy spice rack. They swing freely and work with the soft close. I will be getting a few more to replace the original stock hinges, that came on the cabinets. They look and work very well.