1-3/8 in. High Carbon Steel Universal Fit Wood Cutting Multi-Tool Oscillating Blade (3-Pack)

Used it once on wood and totally burned off all the serrated edges on the blade. Very disappointing.

ID is too small to fit on my Rockwell Soni Crafter.

Ruined on one single nail on a stud, it’s 20 miles to Home Depot, so not worth returning for another one. Super disappointed, I own a lot of Milwaukee stuff, but this is real real disappointment. Do not buy this.

I specifically researched what brand of blade was best for cutting off nails. Milwaukee and Bosch were rated high. Home Depot didn’t carry the Bosch so I purchased the Milwaukee. I was using this in a bathroom renovation. I had torn out the initial side in the usually messy, destructive way. I wanted to keep the dust and mess to a minimum and thought I could access the back of the drywall nails but cutting them off and simply removing a full drywall sheet, one at a time. This surprising went well, with the exception of the Milwaukee blade. At first it was great then quickly and I cut out one full sheet and my plan worked great. I started on the second sheet then I started loosing teeth on the blade. I decided to try it on a 16d nail and that was the end of it. It quickly became useless and I threw it away. If I recall, I paid approximately $17 for this blade, which is outrageous for what you get. I would not recommend purchasing this to anyone, it was a waste of money. And, drywall nails are not the hardest nails out there. I would expect less life from cutting 16d nails all day long but at $17 this should have lasted all day and then some. Horrible waste of money… DO NOT BUY!

After using 2 out of the 3 of the Milwaukee titanium multi-material blades, two of them immediately became dull and lost their teeth on ONE STUD with a couple nails. I have no complaints on all other Milwaukee products, and are all well engineered and well thought out quality tools and accessories. However, there needs to be improvements on the multi-material titanium blades especially at the price point. I’ll be looking into the carbide blades. Besides that, keep up the good work Milwaukee!!

I use these vibrating tools daily and this is the best nail getter and wood cutter while cutting through metal. Got to take your time and don't force these typ of saw blades, let them do the cutting. I like em!

I have tried and uaws this product for atleast a month now. From cutting door jambs, flooring, 15 gauge nails, hardy boards. It cuts pretty fast and i noticed it still has plenty teeth to use. I can say. Thia product last me longer than the other non-carbide blades. And i would recommend buying this over buying lots of lower quality blades.

I use this blade honestly for anything it is my main blade I pull out and still had a good amount of life in it. I like how it cuts smooth and has no hesitation when coming into contact with any material I’ve cut with it. Honestly I’ve passed it around when people have needed a blade or my tool to make a cut and have no complaints at all. Only down side I could see is that it a piece broke off the teeth of the blade after only a second use but honestly it’s still holding up nice even with that.

I used the titanium enhanced carbide teeth blade to cut through framing nail with no effort at all. Smooth quick cut and the blade has no wear marks after making the cuts. Excellent product!

I used this to cut off about a dozen bolts. The first bolt I cut, some of the teeth just broke right off. After that, it cut amazing, just had to make sure I was cutting where there were still teeth.