8 ft. Cantilever Patio Wall Mounted Umbrella Parsol with Adjustable Pole in Burgundy

Great umbrella for a wall mount application over my high top table. Instructions were not the best. The "1m 80 cm" number was confusing until I realized it meant drilling the lower hole at 70". The instructions indicate to use a 14mm concrete drill but a 1/2" drill bit works fine.I used the included expanding anchors to mount it to my fireplace chimney. If you're a newbie DIYer do some research on how to correctly install masonry anchors. If you're mounting to wood, you may need to provide your own fasteners. (I've never used masonry anchors in wood.) It's a little difficult to install/remove the umbrella by yourself but after you do it once, you'll get the hang of it. I undid the zipper so I could fold the umbrella before installing it which made it a little easier. Trying to maneuver the opened umbrella is awkward especially if there's any wind. I used the option 1 to put the pole clamp ABOVE the support ribs. Still plenty of room to walk under or sit on a higher chair and it allows the umbrella to be unzipped for folding.

Great umbrella. This was just what we were looking for. The umbrella required a bit of tweaking to make it work (the holes in the tilt mechanism were not drilled evenly so we needed to redrill a hole so that the umbrella sat level. Otherwise, it was fairly easy to install. The quality of the ribs and mechanism is wonderful, however the umbrella zipper is white against a tan umbrella which isn't ideal. I think I will have the canopy redone in Sunbrella fabric at a later date, but we are very happy with the umbrella as it is. The shipping was very quick.

Canopy snapped from the swing arm on the second day. Will not withstand more than 10mph wind.

This worked perfect for an area where we didn't want to deal with an umbrella stand. It is under our pergola and mounted on one of the poles extending out over the seating area giving more shade than the "bars" of the pergola roof.