#1 Home Improvement Retailer

Internet #100322335

Model #458503

Store SKU #458503

1 in. x 12 in. x 4 ft. Pine Common Board

  • Ponderosa Pine has excellent workability for a variety of uses
  • Soft Textured wood with straight, close and uniform grain
  • Pine is known for it's ability to take nails without splitting
  • See More Details

Product Overview

Every piece meets the highest grading standards for strength and appearance. This lumber is for a wide range of uses from framing of houses to basic interior finishing applications. Boards can also be used for carpentry, hobbies, furniture, shelving and general finish work. The wood as straight grain and has uniform texture. It has low shrinkage and is worked very easily by hand and machine tools. The product is easy to glue and has good nailing and screw holding properties. The paint retention properties are good and it is fairly easily treated with preservatives.

Specifications

Dimensions

Actual Product Length (ft.)
4
Actual Product Thickness (in.)
.75
Actual Product Width (in.)
11.25
Coverage Area (sq. ft.)
3.75
Nominal Product Length (ft.)
4
Nominal Product Length (in.)
4
Nominal Product Thickness (in.)
1
Nominal Product Width (in.)
12

Details

Appearance Board Type
Softwood Boards
Board Joint Type
Square Edge
Contact Type Allowed
Above Ground
Fastener recommendation
Screws and nails
Features
Paintable,Stainable
Features
Paintable,Stainable
Finish Type
Unfinished
Lumber Grade
No. 2; 2&Btr
Lumber Wood Species
Pine
Material
Wood
Moisture content
Kiln Dried
Number Of Boards Per Pack
1
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

29Questions32Answers

Is it just one board, or is it 6, like in the picture?

Asked by Manny December 13, 2020
2
Answers

it is just 1 unless it says 6 pack in the title and description.

going to be making a long table of 52 inch long 36 inch tall with this wood i got the 6 foot long...

Asked by wolf October 29, 2020
2
Answers

I would recommend at least 10x11/4 and 12's would be better.

can you stack then on top of each other, to make it from 1 inch thick to 2 inch thick, or 3 inch ...

Asked by wolf October 6, 2020
3
Answers

Hi, yes they can be glued together as that is how they make plywood. I would also screw them together as well.

would this be ok to use a step as in stair step i want to make a step of 1 inch thick x 36 inch ...

Asked by wolf October 3, 2020
3
Answers

Yes but you need to make a box with sides on all four sides and a center support in the middle to keep it from caving in when you walk on it. Or make a box as above and use a piece of exterior plywood like a half sheet handy panel. That would be a little stronger.

Has anyone tried using these boards to carve with a CNC?

Asked by Ryan June 17, 2020
2
Answers

Yes they work great

Does this come in 6ft

Asked by Morgan April 20, 2020
3
Answers

Yes you can get them in4-6-8-10-12-14-16 foot boards

Can this be used for floating shelves

Asked by Durai February 24, 2020
3
Answers

No they really need to be double the thickness

is this 1 inch thick or is the actual thickness less than this (.75 in)

Asked by Richard September 15, 2019
5
Answers

many times less than .75in

Are these boards strong enough to be used for loft flooring? They will be supported by 5 2x6's. t...

Asked by sandman May 30, 2019
5
Answers

I would not trust them

Can you use this board for breaking like kicking becaue my dojo i go to by these

Asked by John April 27, 2019
4
Answers

Yes. And upload all the videos of the ambulances rolling in

1 in. x 12 in. x 4 ft. Pine Common Board - page 2

Customer Reviews

  • 4
    out of 316 reviews
  • 85% recommend this product
Filter by:
Showing 1-10 of 316 reviews
With the exception of a half loose knot in the middle, this board could not be better.
With the exception of a half loose knot in the middle, this board could not be better.
by HomeDepotCustomer
This piece of wood was exactly what we needed for our cabinets.
This piece of wood was exactly what we needed for our cabinets.
by
Worked well for intended purpose - to build an enlarged drill press platform for improved woodwor...
Worked well for intended purpose - to build an enlarged drill press platform for improved woodworking. Minor warpage caused little problem.
by Bob
The particular piece I purchased was in pristine condition however many of the other pieces there...
The particular piece I purchased was in pristine condition however many of the other pieces there were warped, twisted, cupped, checked, and cracked in some areas. I had 20 pieces to choose from and I would've used 3.
by ApiaristB
I used this product for recessed shelving. It was fairly square, unwarped an and easy to work wit...
I used this product for recessed shelving. It was fairly square, unwarped an and easy to work with relative to what I had in mind. My project turned out real well.
by CDR
Great wood very straight at just the right price. Go! Go! Go!
Great wood very straight at just the right price. Go! Go! Go!
by MM
I needed some boards quickly so I ordered online from Home Depot trusting they would have some go...
I needed some boards quickly so I ordered online from Home Depot trusting they would have some good ones ready when I got there. I should have taken the time to read the customer reviews. When I got them home I was disappointed to find that every board was warped. One was chipped on the end bad and not suitable for shelving. I sure got laughed at for trusting the big guy. My bad for being in a hurry and next time it'll be worth the drive to the local lumber yard.
by Ewok
1 person found this helpful
Purchased a 6 foot board to use on a DIY bookshelf that I found on Pinterest and wanted to make a...
Purchased a 6 foot board to use on a DIY bookshelf that I found on Pinterest and wanted to make after we decided to upcycle wood crates that we had used for party decor. We cut the wood into two for the length of the three crates, screwed the crates together, then screwed the board to the top and bottom of the crates. We added hairpin metal legs and lightly sanded the boards. I think it looked great and can be used as a bookshelf or television stand.
by jhnsn4
15 people found this helpful
by HOLLIE
I really like this for shelf boards!!
I use these common boards for shelving as I really like the raw wood look. For the most part these boards are very straight, but you should still look through the stacks of boards that they have and find the best one.
by Shirley
Showing 1-10 of 316 reviews