#1 Home Improvement Retailer

Internet # 100054737

Model # 458511

Store SKU # 458511

1 in. x 12 in. x 6 ft. Premium Kiln-Dried Square Edge Whitewood Common Board

  • Meets the highest grading standards for strength and appearance
  • Ideal for carpentry, furniture, shelving and general finish work
  • For interior or exterior use - can be painted or stained
  • View More Details
Store
0 in stock
caret
Product Details
  • Meets the highest grading standards for strength and appearance
  • Ideal for carpentry, furniture, shelving and general finish work
  • For interior or exterior use - can be painted or stained
About This Product

Every piece of 1 in. x 12 in. x 6 ft. Premium Kiln-Dried Square Edge Whitewood Common Board provides you with the perfect solution for all your project needs. These boards combine the highest grade available in the market with unsurpassed quality of finish, making them ideal for any interior application. Well known for its excellent workability, easy nailing, screwing, glue holding and superb paint finish. Sourced from commercially grown tree farms, these forests are FSC certified, meaning they are managed on a completely renewable basis.

  • Each piece of this lumber meets the highest quality grading standards for strength and appearance
  • Lumber can be primed and painted or sealed and stained
  • Highly recommended sealing red knots with shellac based sealer prior to priming and painting to prevent bleed through
  • For interior or exterior use
  • Common: 1 in. x 12 in. x 6 ft.; Actual: 0.75 in. x 11.25 in. x 72 in.
  • Weighs approximately 9 lbs.
  • Untreated premium lumber
  • Square footage coverage: 5.625 sq. ft.
  • Note: product may vary by store
  • Click to learn how to select the right lumber for your project
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 100054737Internet #: 098945051683Model #: 458511
caret

Specifications

Dimensions

Actual Product Length (ft.)6 ftActual Product Thickness (in.)0.75 in
Actual Product Width (in.)11.25 inCoverage Area (sq. ft.)5.62 sq ft
Nominal Product Length (ft.)6 ftNominal Product Thickness (in.)1
Nominal Product Width (in.)12 in

Details

Appearance Board TypeSoftwood BoardsBoard Joint TypeSquare Edge
Fastener recommendationNails, Galvanized Nails, Screws, Construction AdhesivesFeaturesPaintable, Stainable
Finish TypeUnfinishedLumber GradePremium
MaterialWoodMoisture contentKDHT
Number Of Boards Per Pack1TextureSmooth

Warranty / Certifications

Manufacturer WarrantySee store for details
caret

Questions & Answers

16Questions
caret
Q:Why is the Ontario store not keeping up stock on this item?
by|Mar 27, 2023
2 Answers
Answer This Question

A:  It might be too expensive for what it is. I paid a lot, mine was so dried it is was crispy, and it was uneven. I had to cut it into smaller pieces for level shelves.

by|Apr 1, 2023

    A:  can you tell me what store you're asking for

    by|Mar 28, 2023
      caret
      Q:can this be cut to size
      by|Feb 21, 2023
      1 Answer
      Answer This Question

      A:  yes, the store can cut it for you

      by|Jul 19, 2023
        1 found this answer helpful
        caret
        Q:Weight capacity?
        by|Jan 4, 2023
        1 Answer
        Answer This Question

        A:  we cant answer that question without knowing how many brackets will be used , what type of brackets and if they will be screwed into wall studs and the distance between each bracket.

        by|Jan 4, 2023
          caret
          Q:It is labeled as 1-inch thick, but the actual thickness is about 3/4 inch (I measured in the store), why?
          by|Mar 13, 2022
          2 Answers
          Answer This Question

          A:  When the boards are first cut they are the dimensions you see on the tag (Pre-Milled). What you measure in the store the (smooth) board is the post milled product. A good example of what I'm describing is to take a look at the unfinished 2x4 Cedar and compare to the 2x4 PT or KD boards.

          by|Mar 17, 2022

            A:  Thats the way lumber ahs been measured and labelled sinc ethe beginning of time. 1 inch boards Nominal are actually .75" thick. just like a 2x4 is actually 1.5x3.5.

            by|Jul 14, 2023
              1 found this answer helpful
              Showing 1-4 of 16
              caret

              Customer Reviews

              4.1 out of 5
              • 4.1 out of 511 reviews
              • 78% recommend this product
              Filter by:
              Showing 1-10 of 511 reviews
              Board was mostly flat (slight bow on one end) and corners are square. Board was clean with no splinters. Some sap on the ends, not visible but just enough to feel.
              by
              • Verified Purchase
              Love the raw look!!
              I am a big fan of the raw unfinished look of wood and I like to use these common boards for shelving. Because they are kiln dried I run into very minimal warping and the board is straight for the most part. Easy to cut if necessary and easy to run a router if you are looking for a fancier finish
              by
              • Recommended
              I purchased two of the boards for a console table that I built. Usually I go with shorter in widt...
              I purchased two of the boards for a console table that I built. Usually I go with shorter in width, but I decided to go wider this time do I went with the 1x12. The boards come with its imperfections but it’s very good for the price. Easy to sand and the wood grains pops out nicely when stained.
              by
                • Recommended
                1 found this review helpful
                Not warped, no chips and some beautiful knots. Perfect for our window valances.
                Not warped, no chips and some beautiful knots. Perfect for our window valances.
                by
                • DIY
                • Verified Purchase
                • Recommended
                2 found this review helpful
                Beautiful!!...
                Beautiful!!
                by
                • Verified Purchase
                2 found this review helpful
                Great value for the money
                Great value for the money
                by
                • Verified Purchase
                • Recommended
                Good
                Good
                by
                • Verified Purchase
                • Recommended
                I don't use a plank this wide very often during my projects, but I needed this for a bed I am mak...
                I don't use a plank this wide very often during my projects, but I needed this for a bed I am making. First it matched the other wood I am using well, I also did a test stain on it to see if it would take the stain I am using on this projects and it did do well there also. So far I have cross cut this board, ripped it and used two router bits on it and it held up well with minimal chipping. Believe this wood is as good as you would expect from a soft wood.
                by
                • DIY
                • Verified Purchase
                • Recommended
                4 found this review helpful
                Good board for general purpose use.
                Good board for general purpose use.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                only complaint is the boards have the gummy center and when it's cut out the outside edges bend i...
                only complaint is the boards have the gummy center and when it's cut out the outside edges bend in toward the center
                by
                • DIY
                • Verified Purchase
                • Recommended
                Showing 1-10 of 511 reviews

                Compare Similar Items

                current item

                Nominal Product Length (ft.)

                6 ft

                10 ft

                12 ft

                10 ft

                Board Joint Type

                Square Edge

                Square Edge

                Square Edge

                Square Edge

                Finish Type

                Unfinished

                Unfinished

                Unfinished

                Unfinished

                Coverage Area (sq. ft.)

                5.62 sq ft

                6.04 sq ft

                7.25 sq ft

                9.5 sq ft

                Nominal Product Thickness (in.)

                1

                1

                1

                1