1 in. x 12 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board
- Meets the highest grading standards for strength and appearance
- Ideal for carpentry, furniture, shelving and general finish work
- For interior or exterior use - can be painted or stained
- See More Details
Frequently Bought Together
Price:
Product Overview
Every piece of 1 in. x 12 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board is perfect for a wide range of uses, from house framing to basic interior finishing applications. Uses include carpentry, hobbies, furniture, shelving and general finish work. With its easy to glue, good nailing and screw holding properties, this product meets the highest grading standards for strength and appearance. Its straight grain and uniform texture has low shrinkage and is easy to work by both hand and machine tools. In addition, it has great paint retention properties, making it fairly easily to treat with preservatives.
- Each piece of this lumber meets the highest quality grading standards for strength and appearance
- Lumber can be primed and painted or sealed and stained
- Highly recommended sealing red knots with shellac based sealer prior to priming and painting to prevent bleed through
- For interior or exterior use
- Common: 1 in. x 12in. x 8 ft.; Actual: 0.75 in. x 11.25 in. x 96 in.
- Weighs approximately 12 lbs.
- Untreated premium lumber
- Square footage coverage: 7.5 sq. ft.
- Note: product may vary by store
- Click to learn how to select the right lumber for your project
- California residents
Compare Similar Common Boards
 |  | | |
| Brand | UFP-Edge | ||
| Name | 1 in. x 8 in. x 8 ft. Premium Eastern White Pine Shiplap S1S & 3/4 Rufferhead Siding (3-Piece Box) | 1 in. x 8 in. x 6 ft. Eased Edge Pine Shiplap Board (6-Pack) | 1 in. x 12 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board |
| Price | |||
| Ratings | (37) | (45) | (303) |
| Nominal Product Length (ft.) | 8 | 6 | 8 |
| Board Joint Type | Shiplap | Shiplap | Square Edge |
| Features | Paintable,Stainable | Paintable,Stainable | Paintable,Stainable |
| Finish Type | Unfinished | Unfinished | Unfinished |
| Material | Wood | Pine | Wood |
| Nominal Product Thickness (in.) | 1 | 1 | 1 |
| Lumber Wood Species | Spruce/Pine/Fir | ||
| View Product | View Product | View Product |
Compare Similar Common Boards
| | | |
| Brand | UFP-Edge | ||
| Name | 1 in. x 8 in. x 8 ft. Premium Eastern White Pine Shiplap S1S & 3/4 Rufferhead Siding (3-Piece Box) | 1 in. x 8 in. x 6 ft. Eased Edge Pine Shiplap Board (6-Pack) | 1 in. x 12 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board |
| Price | |||
| Ratings | (37) | (45) | (303) |
| Nominal Product Length (ft.) | |||
| Board Joint Type | |||
| Features | |||
| Finish Type | |||
| Material | |||
| Nominal Product Thickness (in.) | |||
| Lumber Wood Species | |||
| View Product | View Product | View Product |
Specifications
Dimensions
Actual Product Length (ft.)
8
Actual Product Thickness (in.)
0.75
Actual Product Width (in.)
11.25
Coverage Area (sq. ft.)
7.50
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
1
Nominal Product Width (in.)
12
Details
Appearance Board Type
Softwood Boards
Board Joint Type
Square Edge
Fastener recommendation
Nails, Galvanized Nails, Screws, Construction Adhesives
Features
Paintable,Stainable
Finish Type
Unfinished
Lumber Grade
Premium
Lumber Wood Species
Spruce/Pine/Fir
Material
Wood
Moisture content
KDHT
Number Of Boards Per Pack
1
Texture
Smooth
Warranty / Certifications
Manufacturer Warranty
See store for details
Questions & Answers
26Questions29Answers
Has this wood have been chemically seal or treated wit additional chemicals?
Asked by Jose April 20, 20212
AnswersI have no idea. It takes stain and sealer nicely.
I wanted to use as a stair skirtboard (looks only - outside of tread), can the edges be nicely ro...
Asked by Mick November 24, 20204
AnswersYes, its easy to work with and routes well unless you hit a knot
Can this product be used for exterior facia?
Asked by AT November 1, 20202
AnswersYes. It would be recommended that a sealer and a coat of paint be applied.
website shows 66 in stock. The shelf was empty...!
Asked by phil September 27, 20203
AnswersOne shelf down from there.
Can I use this wood for a bathroom ceiling if treated?
Asked by DYIer June 9, 20201
AnswerTechnically yes, but I wouldn’t recommend it. You might want to go with some pretreated ship lap and paint it the color of your choice
Can I get these plane them as well as cutting them to size?
Asked by Brigitte September 1, 20192
AnswersThey don’t need to be planed but a worker in the store can cut them if you need to
How much does this weigh? (Average)
Asked by Sarah August 29, 20194
AnswersIn the "product overview" section of the product page, it lists the weight as approximately 7.5 lbs. I hope this helps!
JD Irving says it is Eastern White Pine but the details say Spruce/Fir/Pine. Is it only pine?
Asked by BR January 11, 20192
AnswersIt depends on where they source the wood but ‘whitewood’ is either spruce, fir or pine. I live in the midatlantic and the common board in my store is eastern white pine, usually sourced from the southeast.
I need 4 of these 1x12x8ft boards... but I would need them cut to be 1x12x41/2 in wide at the sto...
Asked by Dan September 16, 20185
AnswersYes. The board that we purchased was city to our specifications.
Why is the 12in. x 8 ft. More expensive than the 12in. x 12ft. Option?
Asked by Haven July 18, 20184
Answersthe 12 foot option may not be 'common board' which is a lower quality whitewood.
Customer Reviews
Apr 14, 2020
Warped beyond repair
Upon arrival today to pick up my "Kiln dried" premium pine!? I noticed the warp all the way from my truck to the door the gentleman was coming out of.
Even if I cut it in half, rejoin it and plane it, I would never get more than a 1/2" thickness from this product. I ran inside to see if there was anything better. Unfortunately, I got the last 3 pieces, despite their inventory system saying they had 15.
I have had decent luck in the past, only when there is an excessive amount to sort through. So, why buy my wood from HD? Because I really needed this project done and I don't have the money for a quality lumber store product.
Very dissapointed that I still decided to buy it and fix the warp myself. The time spent does not justify the money I hoped to have saved. Now, I will have to go to another lumbar yard and spend twice as much on top of the kindling I bought at HD.
Don't believe for a second that this product will be squared off in any way and be prepared to do a lot of trimming of ends and possibly clamping for days to work out the buckling.
by BigBuckle
Mar 18, 2019
The eastern white pine boards were used to build a 16" shelving system to connect the top of thre...
The eastern white pine boards were used to build a 16" shelving system to connect the top of three vintage bookshelves we re-purposed. This way we had one continuous top shelf all the way around the closet. We ripped a couple of the whitewood boards in half and combined a full board and a half board with the Kreg pocket jig. The boards required minimal sanding as they were planed smoothly. The boards stained evenly with a rich cherry Minwax stain. We used GRK cabinet screws from Home Depot in various lengths to screw shelf supports we made from the white pine boards to the wall and vintage bookshelves. We're exceptionally pleased with the results. We'll be purchasing the metal adjustable closet rods from Home Depot to complete the job.
by closet
Mar 5, 2019
Many of the boards were not straight at all. I had to search and dig through a pile to find decen...
Many of the boards were not straight at all. I had to search and dig through a pile to find decent enough ones that were straight with no damaged areas or chunks missing. I'm rating a three because of how easily these boards can warp, but i still recommend for certain projects because the wood is easy to work with and looks great as a finished project.
by JJWack
Jan 4, 2019
easy to work with
Wanted to build a bug cage for the kiddos when we are playing in the yard and find some. With that said it worked great easy to sand all the corners I did it by hand to round them out. I’ve built other things with this wood before so I knew it would work great for this little project. I wouldn’t build anything that will need to hold a lot of weight
by gettingthingsdone
Related Products
