Every piece of 1 in. x 2 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board provides you with the perfect solution for all your project needs. These boards combine the highest grade available in the market with unsurpassed quality of finish, making them ideal for any interior application. Well known for its excellent workability, easy nailing, screwing, glue holding and superb paint finish. Sourced from commercially grown tree farms, these forests are FSC certified, meaning they are managed on a completely renewable basis.
Each piece of this lumber meets the highest quality grading standards for strength and appearance
Lumber can be primed and painted or sealed and stained
Highly recommended sealing red knots with shellac based sealer prior to priming and painting to prevent bleed through
For interior or exterior use
Common: 1 in. x 2 in. x 8 ft.; Actual: 0.75 in. x 1.5 in. x 96 in.
Nails, Galvanized Nails, Screws, Construction Adhesives
Number Of Boards Per Pack
Warranty / Certifications
See store for details
Questions & Answers
Is the USA sourced wood?
Asked by Nick September 16, 2019
yes , it mostly comes from Maine
How many boards come in a bundle
Asked by Walker April 23, 2018
The boards at my store come in bundles of 9.
Hi, I would like to know if there is a thiner measurement than 1 in
Asked by Julia February 19, 2018
for thinner boards, pine isn't usually used. you can find oak and poplar in 1/2" and 1/4" thicknesses
Can I cut this with a hand-miter saw?
Asked by HomeDepotCustomer July 14, 2017
yes it is a soft wood
Can this be used for face frame?? Is there a better choice??
Asked by John November 2, 2016
I have used for face frame. oak is a better choice , as is maple. but for the cost - this will work.
out of 108 reviews
72% recommend this product
Showing 1-10 of 108 reviews
Feb 14, 2018
Used this for shelf facing in a storage room. Easy...
Used this for shelf facing in a storage room. Easy to work with and holds up great! All other parts of the shelving are home depot products as well.
3 people found this helpful
Feb 25, 2017
I purchased these to help build a shoe rack. The boards were not perfectly straight but for my ap...
I purchased these to help build a shoe rack. The boards were not perfectly straight but for my application, that didn’t matter as they were being cut into small pieces. These boards cut well and did not splinter or split on the table saw. I rounded the edges with a router and then sanded them smooth. I eve pre-drilled holes and countersunk screws in them. They did what I expected them to do and the shoe rack came out looking good.