The 1" product identifier is the historical industry terminology for products in this class. Actual board thickness in this 1" class of products ranges from 3/4" to 11/16" to 18mm to 16mm...and many others in-between. We make sure to identify our product with the actual thickness "0.669" so the consumer knows the exact thickness by which this specific product is sold.
MDF Boards can be routed and shaped with any carbide tool....you will get a nice clean profile. I recommend Priming the cut surfaces prior to painting as the raw MDF will absorb paint rapidly compared to the primed surfaces.
Hi Customer, it looks like this 1 in. x 3 in. x 8 ft. Primed MDF Board is a store exclusive item and only able to be bought in a Home Depot store. Unfortunately we do not sell it with online stock for purchase. If you are unable to see the store inventory or price it is most likely either not a stocked item in your area or no longer available for purchase from Homedepot.com. I would advise you visit or contact your local Home Depot store for pricing and availability. Please follow the steps below to localize your Homedepot.com: 1. Localize Homedepot.com using your zip code (My Store Location: Change) 2. Choose the store where you want to pick up the item (Make this my Store) We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
No, you can't get the affect of wood stain that you achieve with raw wood as the surface is primed. The surface is primed, making it ideal for paint adhesion.
No, this product is not intended for Outdoor use...Indoor Only. For a product that will be exposed to the elements and standing water I recommend the following: Pressure Treated Lumber (enhanced for exterior use) Plastic or PVC
Excellent question and observation. The answer is both! The boards are primed 4-sides and the product is defined as E2E or Eased Two Edge. Two edges are Eased "slightly rounded" and the opposite two edges are SE or Square Edge. This product configuration allows the user to flip the board for E2E or SE edge out, depending on desired look. Hope this helps.