A:  You could just get the Queen Slat Kit https://www.homedepot.com/p/1-in-x-4-in-x-5-ft-Pine-Queen-Bed-Slat-Board-7-Pack-231575/207182035

A:  Hi Elaine. The 1 x 4 x 10' Select Pine boards will work GREAT for bed slats, and yes, a store associate can cut them in half for you, resulting in the exact length needed to support your 60" wide queen box spring. Money-saving tip: Select is the highest grade board The Home Depot offers. If you don't mind characteristics such as relatively small knots, a less expensive board can safely support your bed.

A:  Yes. The wood is strong, has no knots and is straight. All full service Home Depots will cut the wood for you.

A:  Hi Gras. This questions forum is set up for manufacturers to respond to inquiries about their products. For pricing, please contact your local store directly. Thanks for your interest and best wishes with your project.

A:  Hello JustQ. As the manufacturer, we don't set store pricing for The Home Depot. Please call or visit your nearest store for a prompt answer to your question. Best wishes with your project!

A:  Hello JustQ. As the manufacturer, we don't set store pricing for The Home Depot. Please call or visit your nearest store for a prompt answer to your question. Best wishes with your project!

A:  You can use them but I sand them first for better bond and to assure no surface dirt was in place. Just a 100-150 grit quick sand and wipe would help the glue for long term.

A:  Hi Jeremy. These boards can be glued together just as they are. Minor improvement in adhesion may be achieved by light sanding, but it is not necessary and will require a thorough removal of the wood dust or adhesion can be compromised.

A:  Hi Jeremy. No sanding is necessary or recommended. You can glue the boards together just as they are right from the store for excellent adhesion. However, first remove any dust or sawdust that may have accumulated during storage or from cutting to size or sanding to build your project.

A:  These boards can be glued together as they are. Minor improvement in adhesion may be experienced by light sanding, but this is not necessary and will require a thorough removal of the wood dust or adhesion can be compromised.

A:  Use of the product is solely at the purchaser's discretion.